Hobart Legacy+ HL662 Bruksanvisning

Hobart Matberedare Legacy+ HL662

Läs nedan 📖 manual på svenska för Hobart Legacy+ HL662 (72 sidor) i kategorin Matberedare. Denna guide var användbar för 10 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/72
701 S. RIDGE AVENUE
TROY, OHIO 45374 - 0001
937 332-3000
www.hobartcorp.com
INSTRUCTIONS
MANUAL
MODELS
HL600
HL600C
HL662
HL800
HL800C
HL1400
HL1400C
Page 1 - English
Page 25 - Spanish
Page 49 - French F48154 (May 2021)
– 2 –
ITW Food Equipment Group © HOBART 2021
TABLE OF CONTENTS
GENERAL .................................................................................................................................................................3
Safety Guidelines ................................................................................................................................................4
Operation Guidelines ..........................................................................................................................................4
Dust Hazard ........................................................................................................................................................5
Warning Symbol ..................................................................................................................................................5
Warranty Disclaimer ............................................................................................................................................5
General Information ............................................................................................................................................5
INSTALLATION ........................................................................................................................................................6
Unpacking ...........................................................................................................................................................6
Location ..............................................................................................................................................................6
Electrical Connections ........................................................................................................................................7
OPERATION ............................................................................................................................................................8
Initial Checks .......................................................................................................................................................8
Mixer Components ..............................................................................................................................................9
Controls .............................................................................................................................................................12
Bowl Placement ................................................................................................................................................13
Agitator ..............................................................................................................................................................14
Power Bowl Lift .................................................................................................................................................14
Prepare For Mixing ...........................................................................................................................................15
Timer Operation (SmartTimer™).......................................................................................................................15
Operating Notes ................................................................................................................................................16
Unloading ..........................................................................................................................................................17
Wire Cage (Fig. 13) ...........................................................................................................................................17
CLEANING .............................................................................................................................................................19
MAINTENANCE .....................................................................................................................................................20
Interlock Safety System ...................................................................................................................................20
Lubrication ........................................................................................................................................................20
Transmission Belt ..............................................................................................................................................21
Adjustments ......................................................................................................................................................21
TROUBLESHOOTING ..........................................................................................................................................23
Troubleshooting Guide ......................................................................................................................................23
Service ..............................................................................................................................................................23
AGITATORS AND ATTACHMENTS ......................................................................................................................24
Available Agitators and Attachments .................................................................................................................24
– 3 –
INSTALLATION, OPERATION AND CARE OF
LEGACY+® MIXERS
60-QUART through 140-QUART
SAVE THESE INSTRUCTIONS
GENERAL
This Operation Manual is for the Hobart Legacy+® 60-Qt through 140-Qt Floor Mixers which are available
LQWKUHHGLႇHUHQWERZOVL]HV9LVLWWKHZHEVLWHZZZKREDUWFRUSFRPWRVHHDGGLWLRQDOPL[HUVL]HVDYDLODEOH
from Hobart.
Device Bowl Size (Qt) Motor Horsepower Hub Mixing Speeds
HL600 60-Qt 2.7 HP Motor #12 STIR, plus four mixing speeds
HL600C 60-Qt 2.7 HP Motor #12 Correctional Mixer, STIR, plus
four mixing speeds
HL662 60-Qt 2.7 HP Motor #12 Pizza Mixer, two mixing
speeds
HL800 80-Qt 3.0 HP Motor N/A STIR, plus four mixing speeds
HL800C 80-Qt 3.0 HP Motor N/A Correctional Mixer, STIR, plus
four mixing speeds
HL1400 140-Qt 5.0 HP Motor N/A STIR, plus four mixing speeds
HL1400C 140-Qt 5.0 HP Motor N/A Correctional Mixer, STIR, plus
four mixing speeds
All sizes of Hobart Maximum Heavy Duty Floor Mixers feature a digital SmartTimer™ with Shift-on-the-Fly™
Controls and a power bowl lift as standard equipment.
A variety of agitators and accessories are available. These are described in a separate Use and Applications
Handbook available on our website at www.hobartcorp.com.
Step down bowl sizes and agitators are available for the 60-Qt through 140-Qt mixers (e.g. 40-Qt bowl for
60-Qt mixer). Please see the website or contact you authorized Hobart Distributor for more information.
– 4 –
SAFETY GUIDELINES
All operators must be properly trained in the safe operation of the mixer and attachments.
To avoid risk of serious injury follow all precautions and instructions in this manual when installing,
operating, and servicing the mixer.
To avoid risk of serious injury, keep hands, feet, clothing, and utensils away from the bowl, bowl
support, slideways, and agitator when the mixer is in operation or any of the components are
moving.
Do not operate the mixer if it is not in proper operating condition.
Disconnect power to the mixer and follow lockout-tagout procedures before moving or servicing
the mixer.
Do not operate the mixer if parts are disassembled.
Do not override safety switches on the mixer.
When moving the mixer make sure it is stable to avoid tipping and keep hands and feet clear of
the bottom of the mixer to avoid pinching.
Use the STOP button to stop the mixer. Never open the wire cage or use the power bowl lift to
stop the mixer.
Do not wear loose clothing around the mixer.
 'RQRWLQKDOHGXVWSDUWLFOHVIURPPL[LQJLQJUHGLHQWV([SRVXUHWRGXVWLQFOXGLQJÀRXUPD\EH
harmful to health. When mixing ingredients that develop dust use the STIR speed until the dust is
eliminated and follow the instructions in the DUST HAZARD section below.
Do not install or leave an agitator on the mixer without a bowl in place.
 'RQRWXVHH[FHVVLYHIRUFHZKHQRSHUDWLQJZKLFKFRXOGDHFWWKHVWDELOLW\RIWKHPL[HU
OPERATION GUIDELINES
Use the correct sized bowl only with agitators for that sized bowl. Double check the sizes
when using a reduced sized bowl, by consulting the mixer accessories chart available
at www.hobartcorp.com.
 (QVXUHWKHERZODJLWDWRUDQGZLUHFDJHDUHFRUUHFWO\¿WWHGWRWKHPL[HU
Stop the mixer before adding more ingredients unless using a food chute.
Have your mixer regularly serviced; at least twice a year for typical usage. Mixers may require
more or less service depending on frequency of use.
Use the mixer in a well-lit area.
Ensure this manual is kept in an easily accessible place near the mixer for future reference.
Do not clean the mixer with scouring powder or a scouring pad.
Do not clean aluminum agitators in dishwashers.
Do not hose or pressure clean the mixer. It is important to adhere to the cleaning instructions
detailed in the CLEANING section of the manual.
– 5 –
DUST HAZARD
In order to minimize any dust hazard, follow the instructions detailed below.
:KHQPL[LQJLQJUHGLHQWVFDUHPXVWEHWDNHQWRDYRLGWKHLQKDODWLRQRIGXVWSDUWLFOHVHJÀRXU5HIHUHQFH
should be made to the product supplier’s data sheets to ensure adequate precautions and protections
are taken.
,QJUHGLHQWVVXFKDVÀRXUPXVWEHDGGHGFDUHIXOO\WRPLQLPL]HDLUERUQHGXVWSDUWLFOHV
Carefully slit the bag while holding it in the lower part of the bowl. When mixing dry ingredients use the
lowest speed and a splash cover to minimize dust emission. Mix the ingredients in the bowl using the
lowest speed until the risk of producing any dust is eliminated. Fit suitable dust extraction equipment.
WARNING SYMBOL
To identify the safety messages in this manual, the following symbol has been used.
The WARNING symbol is located in the manual before information corresponding
to the safe use of the mixer.
WARRANTY DISCLAIMER
,QVWDOODWLRQVDQGUHSDLUVFDUULHGRXWE\QRQDXWKRUL]HGVHUYLFHWHFKQLFLDQVPD\DႇHFWWKHPL[HUZDUUDQW\
8VLQJRWKHUWKDQRULJLQDOUHSODFHPHQWSDUWVPD\DႇHFWWKHPL[HUZDUUDQW\7HFKQLFDODOWHUDWLRQVWRWKH
PL[HUPD\DႇHFWWKHPL[HUZDUUDQW\
For warranty information, please contact Hobart Customer Care.
GENERAL INFORMATION
Hobart reserves the right to alter the design of its products without prior notice. If you have questions
UHJDUGLQJPL[HUGHWDLOVQRWLQFOXGHGLQWKLVPDQXDOFRQWDFW\RXUORFDO+REDUW6HUYLFH2ႈFH
– 6 –
INSTALLATION
UNPACKING
The mixer was inspected before leaving the factory. The carrier assumes full responsibility for the safe
delivery of the mixer upon acceptance of the mixer for shipping. The customer must check for possible
shipping damage immediately upon receipt before moving, installing, or modifying the mixer.
If damage is found, keep all original packaging materials for inspection purposes. The customer must
complete the following steps to report the damage.
 &DUULHU¶VORFDOWHUPLQDOPXVWEHQRWL¿HGZLWKLQEXVLQHVVGD\VRIVKLSPHQWUHFHLSWQRWHWLPH
GDWHDQGZKRZDVVSRNHQWRDQGIROORZXSDQGFRQ¿UPZLWKZULWWHQRUHOHFWURQLFFRPPXQLFD-
tion.
2. Notify Hobart customer care at (800) 333-7447 within 5 business days of shipment receipt.
LOCATION
3ULRUWRLQVWDOODWLRQWHVWWKHHOHFWULFDOVHUYLFHWRHQVXUHWKDWLWPDWFKHVWKHVSHFL¿FDWLRQVRQWKHPL[HU
data plate.
Place the mixer in its operating location. There should be adequate space around the mixer for the user
to operate the controls and to install and remove bowls. The area above and to the right side of the mixer
should allow the top and side covers to be removed for routine maintenance and servicing.
6HOHFWDVXLWDEOHÀDWDQGOHYHOVXUIDFHWKDWFDQVXSSRUWWKHZHLJKWRIWKHPL[HUDQGFRQWHQWVRIDIXOOERZO
Once in position, the mixer must be leveled:
Remove the two top cover screws and the top
cover.
Place a level on the top rim of the large pulley
(Fig. 1). Slide shims under the base contact
surface of the mixer as required to level it front-
to-back and side-to-side.
Do not replace the top cover until installation is
completed.
4WDQG4WPL[HUVPD\EHEROWHGWRWKHÀRRUXVLQJVWXGV)ORRUDQFKRULQJKDUGZDUHLVLQFOXGHG
with some models.
1. Place the mixer in its operating location.
 0DUNWKHÀRRUXVLQJWKHIRXUKROHVLQWKHEDVHDVDWHPSODWH
 0RYHWKHPL[HUIRUDFFHVVWRWKHÀRRU
 8VLQJDGLDPHWHUELWGULOOIRXUKROHVLQÀRRUWRDGHSWKRI
 'ULYHÀRRUDQFKRUVÀXVKZLWKWKHVXUIDFHRIWKHFRQFUHWH
6. Expand the anchor with the setting tool provided. Anchor is properly expanded when shoulder of
VHWWLQJWRROLVÀXVKZLWKWKHWRSRIWKHDQFKRU
7. Place the mixer in its operating location over the drilled holes.
 ,QVWDOOVWXGVWKURXJKWKHEDVHDQGLQWRWKHÀRRUDQFKRUV
 ,QVWDOOÀDWZDVKHUVORFNZDVKHUVDQGQXWVRQWRWKHVWXGVDQGWLJKWHQ
 6DZRDOOWKUHDGVÀXVKZLWKWKHWRSRIWKHQXWDQGUHPRYHDQ\VKDUSHGJHV
Fig. 1
– 7 –
ELECTRICAL CONNECTIONS
Electrical and grounding connections must comply with the applicable portion
of the National Electrical Code and/or other local electrical codes.
Disconnect the electrical power to the mixer and follow lockout / tagout
procedures.
A hole for 3/4"-trade-size conduit is located at the top of the pedestal. Make electrical connections per the
wiring diagram located on the inside of the top cover.
Single-Phase Mixer:
 &RQQHFW¿HOGVXSSO\OHDGZLUHVWR/DQG/
Connect ground wire to ground lug on the mixer.
 &XWRႇVWULSSHGSRUWLRQRI/RQ/HJDF\® Mixer and wrap securely with electrical tape to insulate
the exposed conductor.
Three-Phase Mixer:
 &RQQHFW¿HOGVXSSO\OHDGZLUHVWR//DQG/
Connect ground wire to ground lug on the mixer.
– 8 –
OPERATION
INITIAL CHECKS
To avoid risk of serious injury, keep hands, feet, clothing, and utensils away from
the bowl, bowl support, slideways, and agitator when the mixer is in operation or when any of
the components are moving.
This food mixer is only for professional use by properly trained persons.
Ensure operators have read and understood this manual and have received
proper training.
Do not use the mixer without the interlocked wire cage in place.
The Legacy+® mixer is equipped with SmartTimer™ controls and a power bowl lift. Other operating parts
(Fig. 3, Fig. 4, and Fig. 5) and their functions are described throughout the Operation section.
The wire cage must be in position or the mixer will not operate.
The bowl must stay in the locked position on the bowl support or the mixer will not operate.
If the bowl support is not all the way up (mix position), the mixer will not operate unless the START button
is pressed and held.
If the bowl support is not in the mix position and the START button is pressed and held, the mixer will
operate only in STIR speed.
Check Lubrication Before Use
This mixer is shipped with oil in the transmission.
Check oil level before starting mixer (Fig. 2). Refer
to the Lubrication section for applicable lubrication
procedures.
Wiring Check
1. Turn the SPEED dial pointer to STIR.
2. Apply power to the mixer. With the bowl
locked into place, the bowl support all the
way up and wire cage closed, momentarily
run the machine by pushing the START and
then STOP buttons.
 9HULI\WKDWWKHERZOOLIWUDLVHVDQGORZHUVSHUWKHVZLWFKGLUHFWLRQDUURZV,IQRWSURFHHGWRVWHS
3a below.
a. Refer to the Electrical Connections section and follow all warnings and instructions to correct
the lead wires.
Fig. 2
Transmission Fill Plug / Oil Dipstick
– 9 –
MIXER COMPONENTS
60-Quart Mixer
Fig. 3
Controls
Apron
Bowl Support
Bowl Lock Lever
Attachment Hub
Wire Cage
Agitator
Drip Cup-
Splash Guard
Assembly

Produktspecifikationer

Varumärke: Hobart
Kategori: Matberedare
Modell: Legacy+ HL662

Behöver du hjälp?

Om du behöver hjälp med Hobart Legacy+ HL662 ställ en fråga nedan och andra användare kommer att svara dig




Matberedare Hobart Manualer

Matberedare Manualer

Nyaste Matberedare Manualer