Homak Security HS30103630 Bruksanvisning
Homak Security
Valv
HS30103630
Läs nedan 📖 manual på svenska för Homak Security HS30103630 (12 sidor) i kategorin Valv. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/12
OWNER’S MANUAL &
OPERATING INSTRUCTIONS
GUIDE D’UTILISATION ET
DIRECTIVES DE
FONCTIONNEMENT
GUÍA DE UTILIZACIÓN Y
DIRECTIVAS DE
FUNCIONAMIENTO
12 GUN STEEL SECURITY CABINET - BLACK
CABINET DE SÉCURITÉ EN ACIER
POUR 12 ARMES À FEU - NOIR
GABINETE DE SEGURIDAD DE ACERO PARA 12
ARMAS DE FUEGO - NEGRO
Model / Modèle / Modelo : HS30103630
This is not a toy. This is not intended for use by children.
Cet article n’est pas un jouet et n’est pas destiné aux enfants.
Este artículo no es un juguete. No está destinado al uso de los niños
CAUTION:
Read all Instructions and safety tips before using this product.
ATTENTION :
Lire toutes les directives et conseils de sécurité avant d’utiliser ce produit.
ATENCIÓN :
Leer todas las instrucciones y las reglas de seguridad antes de utilizar este
producto.
- 2 -
THANK YOU FOR PURCHASING A
HOMAK SECURITY PRODUCT.
WE APPRECIATE YOUR BUSINESS.
Congratulations on your new purchase!
Inside your gun cabinet, you will fi nd the following items:
A) Keys D) 4 Screws
B) Foam Components E) 4 Washers
C) Plastic Barrel Rest Kit F) 3 Bins
Locate this instruction manual and keep in a safe place after
reading thoroughly. The factory key code can be found printed
on the back page of this manual. If this code is lost, please call
1-800-874-6625 for assistance.
1. Install the cabinet
Locate the four washers and
screws. Place the cabinet in
a suitable location aligning
the holes on the back of the
cabinet with two studs in the
wall that are 16” apart.
Pre-drill the holes into the
studs before permanently
installing cabinet.
NOTE: This cabinet is not
designed to be used without
securing it to a wall or other
surface. It may tip over.
MECHANICAL ASSEMBLY
Door
Lock Cylinders
Mounting Holes
- 3 -
B
Foam
Components
C
BARREL REST
MOUNTING BAR
2. Foam Component
The foam part is shown below. The part has been designed to fi t into
the cabinet. Carefully, remove the paper backing revealing the adhesive
backing and place neatly into the cabinet. Once the backing has been
removed and the foam is attached, it can not be removed without
damage.
Decide the height that you will place the barrel rest. From this measure-
ment cut the back wall foam into two pieces at the height that you will
place the barrel rest. Any extra that is left may be placed above the barrel
rest on the back wall.
Back Wall
Foam
Left
Side
Foam
Right
Side
Foam
Bottom
Produktspecifikationer
| Varumärke: | Homak Security |
| Kategori: | Valv |
| Modell: | HS30103630 |
Behöver du hjälp?
Om du behöver hjälp med Homak Security HS30103630 ställ en fråga nedan och andra användare kommer att svara dig
Valv Homak Security Manualer
14 September 2024
14 September 2024
14 September 2024
14 September 2024
Valv Manualer
- Valv Philips
- Valv Honeywell
- Valv Abus
- Valv Salvus
- Valv Workzone
- Valv Nedis
- Valv Yale
- Valv SereneLife
- Valv Hard Head
- Valv Dometic
- Valv Master Lock
- Valv Perel
- Valv Burg-Wachter
- Valv SentrySafe
- Valv Phoenix
- Valv Olympia
- Valv Kidde
- Valv Topcraft
- Valv Barska
- Valv First Alert
- Valv Sygonix
- Valv Conrad
- Valv Fluke
- Valv Varo
- Valv Sentry
- Valv Filex
- Valv Kreator
- Valv Sistec
- Valv SMC
- Valv FireKing
- Valv Rottner Tresor
- Valv Olymp
- Valv Suncast
- Valv Protector
- Valv NOFIRE
- Valv Technomax
- Valv Kreator-Varo
- Valv M-Locks
- Valv Fichero
- Valv EasySafe
- Valv ROMA
- Valv Stamony
Nyaste Valv Manualer
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
26 Oktober 2024
20 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024