Homak Security HS30120100 Bruksanvisning

Homak Security Valv HS30120100

Läs nedan 📖 manual på svenska för Homak Security HS30120100 (12 sidor) i kategorin Valv. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/12
OWNER’S MANUAL
& OPERATING INSTRUCTIONS
GUIDE D’UTILISATION ET
DIRECTIVES DE
FONCTIONNEMENT
GUÍA DE UTILIZACIÓN Y
DIRECTIVAS DE
FUNCIONAMIENTO
10 GUN STEEL SECURITY CABINET
CABINET DE SÉCURITÉ EN ACIER
POUR 10 ARMES À FEU
GABINETE DE SEGURIDAD DE ACERO
PARA 10 ARMAS DE FUEGO
MODEL/ MODÈLE/ MODELO:
HS30120100 - BLACK
- NOIR
- NEGRO
This is not a toy. This is not intended for use by children.
Cet article n’est pas un jouet et n’est pas destiné aux enfants.
Este artículo no es un juguete. No está destinado al uso de los niños
CAUTION:
Read all Instructions and safety tips before using this product.
ATTENTION :
Lire toutes les directives et conseils de sécurité avant d’utiliser ce produit.
ATENCIÓN :
Leer todas las instrucciones y las reglas de seguridad antes de utilizar este
producto.
- 2 -
THANK YOU FOR PURCHASING FIRST WATCH
BY HOMAK SECURITY.
WE APPRECIATE YOUR BUSINESS.
Congratulations on your new purchase!
Inside your gun cabinet, you will nd the following items:
A) Keys D) 4 Screws
B) Bottom Floor Foam E) 4 Washers
C) Plastic Barrel Rest Kit
Locate this instruction manual and keep in a safe place after
reading thoroughly. The factory key code can be found printed
on the back page of this manual. If this code is lost, please call
1-800-874-6625 for assistance.
10 GUN STEEL SECURITY CABINET
MODEL/ MODÈLE/ MODELO:
HS30120100 - BLACK
- 3 -
1. Install the cabinet
Locate the four washers and
screws. Place the cabinet in
a suitable location aligning
the holes on the back of the
cabinet with two studs in the
wall that are 16” apart.
Pre-drill the holes into the
studs before permanently
installing cabinet.
NOTE: This cabinet is not
designed to be used without
securing it to a wall or other
surface. It may tip over.
MECHANICAL ASSEMBLY
B
BOTTOM FLOOR
FOAM
C
BARREL REST
MOUNTING BAR
2. Foam Component
The foam part is shown below. The part has been designed to t into the
bottom of the cabinet. Carefully, remove the paper backing revealing the
adhesive backing and place neatly into the bottom of the cabinet. Once
the backing has been removed and the foam is attached, it can not be
removed without damage.
Door
Lock Cylindar
Mounting Holes

Produktspecifikationer

Varumärke: Homak Security
Kategori: Valv
Modell: HS30120100

Behöver du hjälp?

Om du behöver hjälp med Homak Security HS30120100 ställ en fråga nedan och andra användare kommer att svara dig