Hotpoint RLA36G 1 Bruksanvisning

Hotpoint Frys RLA36G 1

Läs nedan 📖 manual på svenska för Hotpoint RLA36G 1 (16 sidor) i kategorin Frys. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/16
LARDER FRIDGE - MODELS RLA34,RLA36,RLM34,RLM36
INSTRUCTIONS FOR INSTALLATION & USE
GETTING STARTED:
To ensure that your fridge runs reliably and efficiently follow these steps.
Choose a location for your
fridge, away from any
heat sources and
allow adequate
ventilation - 30mm
(11/4inch) gap above.
Level the fridge by
adjusting the front feet.
This will stop rocking or
vibration and keep the
door aligned.
Plug in and switch on.
Allow the fridge to cool
before placing food
inside.
All food in the fridge
should be covered.
Move the fridge into
position, using the sides
of the cabinet. Take care
to avoid damaging the
refrigerant circuit pipe
work on the rear.
Before plugging in and
switching on, leave the
fridge in its final
location for at least 15
minutes to allow it to
settle.
Your fridge is now
working.
If after 24 hours your
fridge is not operating as
you want, refer to the
Troubleshooting section.
Read the rest of these instructions to get the best from your appliance
and remember to fill in your guarantee registration.
Keep this Book in a safe place for quick reference.
STEP 1 STEP 2
STEP 3 STEP 4
STEP 5 STEP 6
SAFETY &
INSTALLATION CONTROLS USEFUL ADVICE
CLEANING &
MAINTENANCE
SERVICE &
GUARANTEE
TROUBLESHOOTING
For Your Safety
For your safety, read the following advice:
The fridge cooling system contains a small amount of gas which is environmentally
friendly but flammable. To avoid any risk :-
Install the fridge following the installation instructions and ensure
that ventilation openings are kept clear of obstruction.
Take care when installing or moving the fridge to avoid damaging
the pipes on the rear.
If you suspect a leak, do not switch on the fridge, but open the
windows and doors to ventilate the room.
Do not use any mechanical or electrical devices inside the fridge, for
instance for manual defrosting.
Only use this fridge for storing domestic foodstuffs.
When installing your fridge :-
Ensure that the mains cable is not trapped underneath or behind the fridge
when you install or move it.
Do not stack any other appliance on top of this fridge as they may
damage the fridge or become unstable.
When using your fridge :-
Do not sit or stand on top of your fridge.
Do not store poisonous, flammable or dangerous substances in your fridge.
Do not use aerosol sprays for defrosting or cleaning your fridge.
If you sell the fridge, pass on this booklet to the new owner.
Disposal of old electrical appliances
The European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE),
requires that old household electrical appliances must not be disposed of in the normal
unsorted municipal waste stream. Old appliances must be collected separately in order to
optimise the recovery and recycling of the materials they contain and reduce the impact on
human health and the environment.
The crossed out “wheeled bin symbol on the product reminds you of your obligation,
that when you dispose of the appliance it must be separately collected.
Consumers should contact their local authority or retailer for information concerning the
correct disposal of their old appliance.
2
SAFETY &
INSTALLATION
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualied persons in order to avoid a hazard.
This appliance can be used by children aged from 8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
– WARNING: Do not use electrical appliances inside the food storage compartments of theappliance, un-
less they are of the type recommended by the manufacturer.
This appliance is intended to be used in household and similar applications such as
staff kitchen areas in shops, ofces and other working environments;
farm houses and by clients in hotels, motels and other residential type environments;
bed and breakfast type environments;
catering and similar non-retail applications.
Installation
Location & Air Circulation
Locate your fridge away from sources of heat e.g.
cookers, radiators, direct sunlight as extreme temperature
will affect its performance.
Allow a minimum 30mm (11/4inch) between the top of
the fridge and the underside of the worktop.
Providing you follow the recommended ventilation requirements you will :-
Prolong the life of the fridge.
Minimise the risk of condensation on the outside of the fridge.
Minimise the running costs.
Minimise operating sounds caused by vibration.
3
Minimum space required to open door
The fridge needs a space of 600mm (24 inches) in front to allow the door to open.
When positioning the fridge next to a unit, a gap of 30mm (11/4inch) can be left
at the hinge side of the door to allow the easy removal of furniture. If preferred
the fridge can be positioned so that a gap is not left. This will restrict how far the
door can be opened but the furniture can still be removed (see diagram below).
The door hinge side can be changed to make it easier to open (see Door Reversal’
in the CLEANING & MAINTENANCE section).
SAFETY &
INSTALLATION
30mm (11/4inch)
TOP VIEW TOP VIEW
less than 30mm
30mm or more
600mm
600mm

Produktspecifikationer

Varumärke: Hotpoint
Kategori: Frys
Modell: RLA36G 1
Färg på produkten: Zwart
Vikt: 500 g
Bredd: 83.4 mm
Djup: 102 mm
Höjd: 136 mm
Förpackningens vikt: 620 g
Förpackningens bredd: 380 mm
Djuppackning: 413 mm
Förpackningshöjd: 50 mm
Snäll: Koeler
Ljudnivå (hög hastighet: 29.4 dB
Ursprungsland: China
Maximalt luftflöde: 34.1 cfm
Antal fans: 1 ventilator(en)
Färg på belysningen: Wit
Spännande: 12 V
Rotationshastighet (max): 2000 RPM
Rotationshastighet (min): 600 RPM
Belysning LED: Ja
Lämplig plats: Processor
Strömförbrukning (typiskt): 2.4 W
Harmoniserad systemkod (HS): 84733080
Ventilator diameter: 92 mm
Nominell nätspänning: 0.2 A
Antal fläktblad: 7
Maximalt lufttryck: 1.79 mmH2O
Stöd för pulsbreddsmodulering: Ja
Finmaterial: Aluminium
Antal värmerör: 4
Matventilator (bxdxh): 92 x 92 x 25 mm
Värmerörs diameter: 6 mm
Kylflänsens mått (B x D x H): 63.5 x 90 x 136 mm
Fläktkontakt: 4-pin
Kylfläns vikt: 358 g
Mean Time To Failure (MTTF): 40000 uur
Säkerhetsströmstyrka: 0.4 Ah

Behöver du hjälp?

Om du behöver hjälp med Hotpoint RLA36G 1 ställ en fråga nedan och andra användare kommer att svara dig




Frys Hotpoint Manualer

Frys Manualer

Nyaste Frys Manualer