Hotpoint UH8 F1C G UK Bruksanvisning

Hotpoint Frys UH8 F1C G UK

Läs nedan 📖 manual på svenska för Hotpoint UH8 F1C G UK (1 sidor) i kategorin Frys. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/1
ALARMS TABLE
ALARMS TYPE Signal Cause Cure
Door open alarm The acoustical alarm is activated and the Alarm Indicator blinks. The door has remained open for more than 2 minutes. Close the door or press the Stop Alarm to mute the acoustical alarm.
Temperature alarm The Temperature display blinks (°C) and the Alarm Indicator remains on. The inside temperature is not adequate. Press the Stop Alarm button ; the acoustical alarm stops, the Temperature Display (°C)
blinks and the Alarm Indicator remains on until a temperature < -10°C is reached.
Long Black-Out alarm
The Black Out Alarm icon remains on, the Alarm indicator blinks and the
Temperature display (°C) blinks, showing the maximum temperature reached during
blackout.
Prolonged power failure, able to cause the inside temperature to increase to 0°C. Press the Stop Alarm button ; the acoustical alarm stops, the Temperature Display (°C)
blinks and the Alarm Indicator remains on until a temperature < -10°C is reached.
Malfunction The letter “F” blinks on the display (°C). Product malfunction. Contact the After-sales Service.
EN
Read the Instructions for Use carefully before
using the appliance.
19514479400
QUICK START GUIDE
Printed in Italy 04/16- Whirlpool
® Registered trademark/TM Trademark of Whirlpool group of companies - © Copyright Whirlpool Europe s.r.l. 2014. All rights reserved - http://www.whirlpool.eu
TEMPERATURE DISPLAY
ON/STANDBY button
To put the product in Stand-by, press and hold for 3 seconds. All the icons
turn off except On/Standby indicator . To reactivate the appliance
press once (briefly) this button.
ECO NIGHT (NIGHT TIME RATE) / FUNCTION
FREEZE CONTROL button
Eco Night Function
Press to activate/deactivate the Eco Night function.
The Eco Night function enables appliance energy
consumption to be concentrated in the reduced rate
hours, generally at night (see the Instructions for Use).
TEMPERATURE SETTING button
The appliance is normally factory-set for operation at the
recommended temperature of -18°C. The internal temperature
can be adjusted between -16°C and -24°C, proceeding as
follows:
Press to change the set point (°C). The storage temperature
can be changed by -1°C with each pressure of the button: the
value changes cyclically between -16°C and -24°C.
FAST FREEZE button
To activate/deactivate the Fast Freeze function simply
press Fast Freeze button (see the Instructions for Use).
The Fast Freeze function switches off automatically after
50 hours.
BLACK OUT ALARM
Long Black-out Alarm indicator. (see
the Instructions for Use)
1. Control panel *
2. Light (LED system) *
3. Ice packs*
4. Ice Mate* or Ice tray*
5. Drawer divider*
6. Bottle rack*
7. Glass shelves
8. Rating plate with commercial name *
9. Door reversibility kit *
10. Area for freezing fresh food or to store
frozenfood
11. Area for storing frozen foods
12. Door seal
* Available on selected models
HOW TO START THE APPLIANCE
After plugging the appliance to the mains, it starts
the operation automatically. After starting the
appliance, wait at least 4-6 hours before placing food
into the appliance. When the appliance is connected
to the power supply, the display lights up and all
the icons appear on the display for approximately 1
second.
The default (factory) values of the freezer
compartment settings light-up.
HOW TO REVERSE DOOR SWING
- see enclosed Instructions for Use (Version_2)
Is recommended to reverse door swing by two
persons.
There is not foreseen door reversibility for:
- models with integrated handle
- models with glass panel on the door.
Specifications, technical data and images
mayvary from model to model.
To receive the assistance call the number shown
on the warranty booklet or follow the instruction
on the web site www.hotpoint.eu
STOP ALARM button
Press in case of alarm (see the below Alarm Table).
11
3
10
2
3
8
9
4
1
6
5
7
12
PROFREEZE FREEZE CONTROL indicator
ProFreeze / Freeze Control is an advanced technology
that reduces freeze burns and food preserves its
original quality and color.
GB

Produktspecifikationer

Varumärke: Hotpoint
Kategori: Frys
Modell: UH8 F1C G UK

Behöver du hjälp?

Om du behöver hjälp med Hotpoint UH8 F1C G UK ställ en fråga nedan och andra användare kommer att svara dig




Frys Hotpoint Manualer

Frys Manualer

Nyaste Frys Manualer