HQ SFN16 Bruksanvisning

HQ Fläkt SFN16

Läs nedan 📖 manual på svenska för HQ SFN16 (28 sidor) i kategorin Fläkt. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/28

SFN16

MANUAL (p. 2)

Stand fan

ANLEITUNG (S. 3)

Standventilator

MODE D’EMPLOI (p. 5)

Ventilateur sur pied

GEBRUIKSAANWIJZING (p. 7)

Staande ventilator

MANUALE (p. 9)

Ventilatore con supporto

MANUAL DE USO (p. 11)

Ventilador de pedestal

HASZNÁLATI ÚTMUTATÓ (o. 13.)

Állványos ventilátor

KÄYTTÖOHJE (s. 15)

Jalustatuuletin

BRUKSANVISNING (s. 17)

Stående fläkt

NÁVOD K POUŽITÍ (s. 19)

Ventilátor s podstavcem

MANUAL DE UTILIZARE (p. 21)

Ventilator cu picior

ΕΓΧΕΙΡΙΔΙΟ XPHΣ ΣH (σελ. 23)

Ανεμιστήρας δαπέδου

BRUGERVEJLEDNING (s. 25)

Ventilator med fod

VEILEDNING (s. 26)

Stående vifte

ENGLISH

Stand fan

Base and stand assembly:

1. Take out the base and stand parts from the box.

2. Turn the height adjustor counterclockwise, and draw the steel tube out of the stand. Then turn the height

adjustor clockwise to secure it.

3. Insert the stand into the base, fit the screw nut to the stand from the bottom of the base and fasten it.

4. Adjust the height to meet you requirements for the fan’s height.

Fan head and column assembly:

1. Unscrew the knob on the bottom of the fan body.

2. Put the extension column into the hole of the fan body, then tighten the knob to secure it.

3. Remove the spinner and the plastic nut from the front side of the motor shaft and then tighten the plastic

nut. (Figure 1)

1. Lock

2. Spinner

3. Grill Lock

4. Nut

5. Plastic

4. Insert the blade into the shaft, making sure the stopper pin is clipped into the groove of the blade. Screw

the spinner counterclockwise to tighten the blade. (Figure 2)

1. Spinner

2. Lock

3. Blades

4. Groove

5. Stopper pin

5. Put the front grill onto the rear grill and close the clips to tighten both the front and rear grills together.

Operating instructions

Speed function:

Use the “speed” switch to turn the fan “on/off” and adjust the speed by pressing the switch tone of the

following numbers:

0-Off 2-Medium

1-Low 3-High

Rotate function:

To start the fan rotating, press the rotate knob located at the top of the motor casing.

To get the directional airflow, pull the rotate knob.

Angle function:

Unscrew the angle knob, adjust the fan head to the desirable angle by holding the fan head, then tighten the

knob.

Maintenance:

• To keep the fan clean, wipe it with a soft cloth with a mild detergent. Be careful not to use abrasives to

clean the plastic parts of the fan.

• To ensure that the fan keeps functioning properly, apply drops of clean motor oil to the front and back

bearings of the motor every 12 months.

• Before storage, clean the fan completely, then put the plastic bag over the fan and store in a cool dry

place.

FIGURE 2

FIGURE 1

Caution:

• To understand fan operation, read all these instructions carefully before use.

• Always match the power with the rated voltage and frequency of fan.

• Don’t insert fingers, or any other objects through the grill when the fan is operating.

• Disconnect the power cord when relocating the fan.

• Unplug the fan before cleaning it.

Safety precautions:

To reduce risk of electric shock, this product should ONLY be

opened by an authorized technician when service is required.

Disconnect the product from mains and other equipment if a

problem should occur. Do not expose the product to water or

moisture.

Maintenance:

Clean only with a dry cloth. Do not use cleaning solvents or abrasives.

Warranty:

No guarantee or liability can be accepted for any changes and modifications of the product or damage caused

due to incorrect use of this product.

General:

- Designs and specifications are subject to change without notice.

- All logos brands and product names are trademarks or registered trademarks of their respective holders

and are hereby recognized as such.

- This manual was produced with care. However, no rights can be derived. can not accept HQ

liability for any errors in this manual or their consequences.

- Keep this manual and packaging for future reference.

Attention:

This product is marked with this symbol. It means that used electrical and electronic products should

not be mixed with general household waste. There is a separate collections system for these products.

This product has been manufactured and supplied in compliance with all relevant regulations and directives,

valid for all member states of the European Union. It also complies with all applicable specifications and

regulations in the country of sales.

Formal documentation is available upon request. This includes, but is not limited to: Declaration of Conformity

(and product identity), Material Safety Data Sheet and product test report.

Please contact our customer service desk for support:

via website: http://www.nedis.com/en-us/contact/contact-form.htm

via e-mail: service@nedis.com

via telephone: +31 (0)73-5993965 (during office hours)

NEDIS B.V., De Tweeling 28, 5215 MC ’s-Hertogenbosch, THE NETHERLANDS

DEUTSCH

Standventilator

Montage des Fußes und Ständers:

1. Nehmen Sie die Bauteile für den Fuß und den Ständer aus der Verpackung.

2. Drehen Sie die Höheneinstellung im Gegenuhrzeigersinn und ziehen Sie das Stahlrohr aus dem Ständer.

Drehen Sie die Höheneinstellung anschließend im Uhrzeigersinn fest.

3. Stecken Sie den Ständer in den Fuß, schrauben Sie die Schraubenmutter von der Unterseite des Fußes

aus auf den Ständer und drehen Sie diese fest.

4. Stellen Sie die Höhe des Ventilators entsprechenden Ihren Anforderungen ein.

Produktspecifikationer

Varumärke:	HQ
Kategori:	Fläkt
Modell:	SFN16

Behöver du hjälp?

Om du behöver hjälp med HQ SFN16 ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Fläkt HQ Manualer

HQ FN12B Bruksanvisning

23 Augusti 2024

HQ FN16B Bruksanvisning

22 Augusti 2024

HQ KN-MTF12 Bruksanvisning

19 Augusti 2024

HQ FN16 Bruksanvisning

18 Augusti 2024

HQ SFN16 Bruksanvisning

16 Augusti 2024

HQ KN-MSF16 Bruksanvisning

6 Augusti 2024

HQ -TF10 Bruksanvisning

2 Augusti 2024

HQ FN09 Bruksanvisning

1 Augusti 2024

Fläkt Manualer

Nyaste Fläkt Manualer

Bimar VTR2 Bruksanvisning

25 Mars 2025

Sharkoon SHARK Mirror PWM RGB Bruksanvisning

22 Mars 2025

Unold Breezy Bowl 86679 Bruksanvisning

20 Mars 2025

Lasko Motion-Air C27100 Bruksanvisning

18 Mars 2025

Lasko Decor Colors B20401 Bruksanvisning

18 Mars 2025

Lasko Air Flexor 3637 Bruksanvisning

18 Mars 2025

Lasko H20685 Bruksanvisning

18 Mars 2025

Lasko Max Performance 2265QM Bruksanvisning

18 Mars 2025

Toshiba F-TSA20GMY Bruksanvisning

18 Mars 2025

Cecotec EnergySilence Aero 3050 Bruksanvisning

12 Mars 2025