Huawei B535-232 Bruksanvisning

Huawei Router B535-232

Läs nedan 📖 manual på svenska för Huawei B535-232 (88 sidor) i kategorin Router. Denna guide var användbar för 15 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/88

Quick Start Guide

Contents

English................................................................................................................................................1

Français............................................................................................................................................ 13

Deutsch............................................................................................................................................ 25

Italiano............................................................................................................................................. 37

Nederlands....................................................................................................................................... 49

Português......................................................................................................................................... 61

Español.............................................................................................................................................73

Product overview

Power indicator Network status indicator

Wi-Fi® indicator Network port indicator

Signal strength indicator Power button

Hi/WPS button SIM card slot

Reset button Power input

Network port

English

Setup

1Attach the socket to the router.



The socket can help keep the router upright to improve its Wi-Fi signal reception.

2Make sure you use the correct SIM card.

mini-SIM (2FF) micro-SIM (3FF) nano-SIM (4FF)

3Insert the SIM card gently into the SIM card slot in the direction shown in the below until it clicks.gure

lTo remove the SIM card, gently press the SIM card in until it clicks. The card will automatically

pop out.

lDo not insert or remove a SIM card when the router is running, as this may affect performance

or damage the SIM card.

4Connect the power adapter to the router.

The indicators will turn on when the router has successfully connected to a network.

Network status indicator Cyan/blue: Connected to an LTE/3G network.

Signal strength indicator White: More signal bars indicate a stronger signal.

If the Network status indicator is red, it indicates there is no network connection. Please refer to

the FAQs in this guide.

Connecting to your router's Wi-Fi network

Wi-Fi Name˖

Wi-Fi Password˖

Wi-Fi Password

Wi-Fi Password ：

Once the router has connected to a mobile data network, you can connect your computer or mobile phone to

the router's Wi-Fi network to access the Internet. Please refer to the label on the back of the router for the

default Wi-Fi network name ( ) and password (Wi-Fi Name Wi-Fi Password).

lWhen the Wi-Fi indicator is steady on, Wi-Fi is enabled. To enable or disable Wi-Fi, refer to the

router's web-based management page.

lEnsure that you promptly change the Wi-Fi network name and password on the web-based

management page to prevent unauthorized access to your Wi-Fi network. Once you have changed

the password, you will need to reconnect to the router's Wi-Fi network.

Managing your router

You can manage the router using the web-based management page. Please refer to the label on the back of

the router for the default IP address, password and so on.

More information can be found in the web-based management page.

lEnsure that you promptly change the default login password for the web-based management page

to prevent unauthorized users from changing the router's settings.

lYou can also manage your router using the HUAWEI SmartHome App. Scan the QR code below

to download.

Optional congurations

The features described in this section are for reference purposes only. Your router may not support all of these

features.

Connecting computer

You can connect a computer to the router to access the Internet.

Accessing the Internet through an Ethernet port

You can connect the router to a wall-mounted Ethernet port using an Ethernet cable to connect to the

Internet.

Congure the relevant settings on the web-based management page before connecting to the Internet

through an Ethernet port. For details, please contact your carrier.

The Ethernet cable is an optional accessory. To buy an Ethernet cable, please contact an authorized

retailer.

Installing external antennas

In addition to the build-in antenna designed to satisfy your basic needs, you can also install external antenna

to the router to improve signal reception. Please contact your carrier to purchase the antenna. If you only

require one antenna, plug it into the socket.

lTurn off the router and unplug the power adapter before installing any external antennas.

lExternal antennas are only suitable for indoor use. Do not use external antennas during

thunderstorms.

lOnly use external antennas provided by your carrier.

FAQs

How do I restore factory settings?

When the router is turned on, press the Reset button for approximately 3 seconds using a pointed object until

the Power indicator starts to blink. Restoring factory settings will restore the settings to the default. You can

recongure them after the router is restored.

What should I do if I forgot the Wi-Fi password or the login password for the web-

based management page?

Restore the router to its factory settings and then use the default Wi-Fi password and login password to try

again.

What should I do if the Network status indicator is red or an Internet connection

cannot be established?

1 SetupCheck if the SIM card is inserted. Refer to the section for the right size of SIM card and the right way

to insert it into the slot.

2If the issue persists, restore the router to factory settings and try again.

3Contact your carrier to check if your SIM card is out of service. If it's a new card, check if it has been

activated.

What should I do if the Internet speed is slow?

1Check the Signal strength indicator on the router. If it shows weak signal , adjust the router's direction or

move it close to a window to improve signal reception.

2If your device is connected to the router over Wi-Fi, adjust your device's position to receive better signal.

3Switch to Wi-Fi 5 GHz if it is supported by your device.

4Restart the router and your device, and try again.

5Check if you have reached your data limit for the month. If so, your carrier may limit your Internettrafc

speed.

How can I connect to the router using WPS (Wi-Fi Protected Setup)?

To connect a WPS-enabled device to your router using the Hi/WPS button:

1Press and hold the Hi/WPS button on the router for at least 1 second and then release, the Wi-Fi indicator

starts to blink.

2Enable WPS on your device within 2 minutes to connect to the router's Wi-Fi network.

Why can't I access the router's web-based management page?

1Ensure that your computer is connected to the router through an Ethernet cable or Wi-Fi.

2Ensure that your computer is set to obtain an IP address and DNS server address automatically.

3Restart your browser, or try using another browser.

4If the problem persists, restore the router to its factory settings.

Why is the content displayed on the web-based management page not up to date?

Depending on your browser's cache, the content for your device on the web-based management page may

not be up to date. Manually clear your browser's cache (for example, open your browser and choose Internet

Options General Browsing history Delete > > > .) and re-launch the web-based management page.

Does my router support 5 GHz Wi-Fi? How do I connect to its 5 GHz Wi-Fi?

1Yes. Your router supports 5 GHz Wi-Fi, which is faster and less sensitive to interference. However, it does

not penetrate walls as well as 2.4 GHz Wi-Fi and can only be used on devices that support 5 GHz Wi-Fi.

2If you have enabled the feature that prioritizes 5 GHz on your router, the 2.4 GHz and 5 GHz networks will

share the same network name and you will be automatically connected to the faster network. If this feature

is disabled, two Wi-Fi network names will be displayed. Connect to the Wi-Fi network ending with "_5G".

You can manage this feature in your router's web-based management page.

If you are experiencing any other issues with the router:

1Restart the router.

2Restore the router to its factory settings.

3Contact your carrier.

Safety information

THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOES NOT CONSTITUTE ANY KIND OF

WARRANTIES.

LTE is a trademark of ETSI.

Wi-Fi®, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are trademarks of Wi-Fi Alliance.

To better understand how we use and protect your personal information, please read the Privacy Policy at

http://consumer.huawei.com/privacy-policy.

Software Update

By continuing to use this device, you indicate that you have read and agree to the following content:

In order to provide better service, this device will automatically obtain software update information from

Huawei or your carrier after connecting to the Internet. This process will use mobile data, and requires access

to your device's unique (IMEI/SN) and the service provider network ID (PLMN) to check whether youridentier

device needs to be updated.

In addition, this device supports the automatic downloading and installation of important updates from

Huawei or your carrier in cases of emergency. This function is enabled by default. To disable this function,

please log in to the product management website and make the corresponding changes in the settings menu.

Safety information

lSome wireless devices may affect the performance of hearing aids or pacemakers. Consult your service

provider for more information.

lPacemaker manufacturers recommend that a minimum distance of 20 cm be maintained between a device

and a pacemaker to prevent potential interference with the pacemaker. If using a pacemaker, hold the

device on the side opposite the pacemaker and do not carry the device in your front pocket.

lIdeal operating temperatures are 0 °C to 40 °C. Ideal storage temperatures are -20 °C to +70 °C. Extreme

heat or cold may damage your device or accessories.

lKeep the device and accessories in a well-ventilated and cool area away from direct sunlight. Do not

enclose or cover your device with towels or other objects. Do not place the device in a container with poor

heat dissipation, such as a box or bag.

lKeep the device away from sources of heat and such as a heater, microwave oven, stove, water heater,re,

radiator, or candle.

lThe device should be installed and operated with a minimum distance of 20 cm between the radiator and

your body.

lUsing an unapproved or incompatible power adapter, charger or battery may cause explosion or otherre,

hazards.

lChoose only accessories approved for use with this model by the device manufacturer. The use of any other

types of accessories may void the warranty, may violate local regulations and laws, and may be dangerous.

Please contact your retailer for information about the availability of approved accessories in your area.

lThe power plug is intended to serve as a disconnect device.

lFor pluggable devices, the socket-outlet shall be installed near the devices and shall be easily accessible.

lEnsure that the power adapter meets the requirements of Clause 2.5 in IEC60950-1/EN60950-1/UL60950-1

and has been tested and approved according to national or local standards.

lAreas with and explosives: Do not use the device where or explosives are stored (inammables ammables

a gas station, oil depot, or chemical plant, for example). Using your device in these environments increases

the risk of explosion or In addition, follow the instructions indicated in text or symbols. Do not store orre.

transport the device in containers with liquids, gases, or explosives.ammable

lBlasting Caps and Areas: Turn off your device or wireless device when in a blasting area or in areas posted

turn off “two-way radios” or “electronic devices” to avoid interfering with blasting operations.

lMedical devices: Please consult your doctor and the device manufacturer to determine if operation of your

device may interfere with the operation of your medical device.

lHospitals: Switch off your wireless device when requested to do so in hospitals, clinics or health care

facilities. These requests are designed to prevent possible interference with sensitive medical equipment.

lAircraft: Switch off your wireless device whenever you are instructed to do so by airport or airline staff.

Consult the airline staff about the use of wireless devices on board the aircraft, if your device offers a ‘ight

mode’ this must be enabled prior to boarding an aircraft.

Disposal and recycling information

The crossed-out wheeled-bin symbol on your product, battery, literature or packaging reminds you that all

electronic products and batteries must be taken to separate waste collection points at the end of their

working lives; they must not be disposed of in the normal waste stream with household garbage. It is the

responsibility of the user to dispose of the equipment using a designated collection point or service for

separate recycling of waste electrical and electronic equipment (WEEE) and batteries according to local laws.

Proper collection and recycling of your equipment helps ensure electrical and electronic equipment (EEE) waste

is recycled in a manner that conserves valuable materials and protects human health and the environment,

improper handling, accidental breakage, damage, and/or improper recycling at the end of its life may be

harmful for health and environment. For more information about where and how to drop off your EEE waste,

please contact your local authorities, retailer or household waste disposal service or visit the website http://

consumer.huawei.com/en/.

Reduction of hazardous substances

This device and its electrical accessories are compliant with local applicable rules on the restriction of the use

of certain hazardous substances in electrical and electronic equipment, such as EU REACH, RoHS and Batteries

(where included) regulations. For declarations of conformity about REACH and RoHS, please visit our web site

http://consumer.huawei.com/certication.

EU regulatory conformance

Statement

Hereby, Huawei Technologies Co., Ltd. declares that this device B535-232 is in compliance with the essential

requirements and other relevant provisions of Directive 2014/53/EU.

The most recent and valid version of the DoC (Declaration of Conformity) can be viewed at http://

consumer.huawei.com/certication.

This device may be operated in all member states of the EU.

Observe national and local regulations where the device is used.

This device may be restricted for use, depending on the local network.

Restrictions in the 2.4 GHz band:

Norway: This subsection does not apply for the geographical area within a radius of 20 km from the centre of

Ny-Ålesund.

Restrictions in the 5 GHz band:

According to Article 10 (10) of Directive 2014/53/EU, the packaging shows that this radio equipment will be

subject to some restrictions when placed on the market in Belgium (BE), Bulgaria (BG), the Czech Republic

(CZ), Denmark (DK), Germany (DE), Estonia (EE), Ireland (IE), Greece (EL), Spain (ES), France (FR), Croatia (HR),

Italy (IT), Cyprus (CY), Latvia (LV), Lithuania (LT), Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL),

Austria (AT), Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (SK), Finland (FI), Sweden (SE), the

United Kingdom (UK), Turkey (TR), Norway (NO), Switzerland (CH), Iceland (IS), and Liechtenstein (LI).

The WLAN function for this device is restricted to indoor use only when operating in the 5150 to 5350 MHz

frequency range.

ErP Product Information

Huawei Technologies Co., Ltd. hereby declares that its products conform to the Energy-related Products

Directive (ErP) 2009/125/EC. For detailed ErP information and the user manuals required by Commission

Regulation, please visit: .http://consumer.huawei.com/en/certication

Frequency Bands and Power

(a) Frequency bands in which the radio equipment operates: Some bands may not be available in all countries

or all areas. Please contact the local carrier for more details.

(b) Maximum radio-frequency power transmitted in the frequency bands in which the radio equipment

operates: The maximum power for all bands is less than the highest limit value in the relatedspecied

Harmonized Standard.

The frequency bands and transmitting power (radiated and/or conducted) nominal limits applicable to this

radio equipment are as follows: WCDMA 900/2100: 25.7 dBm, LTE Band 1/3/7/8/20/28/32/38: 25.7 dBm, Wi-

Fi 2.4G: 20 dBm, Wi-Fi 5G: 5150-5350 MHz: 23 dBm, 5470-5725 MHz: 30 dBm.

Accessories and Software Information

Some accessories are optional in certain countries or regions. Optional accessories can be purchased from a

licensed vendor as required. The following accessories are recommended:

Adapters: HW-120100X01 (X represents the different plug types used, which can be either C, U, J, E, B, A, I, R,

Z or K, depending on your region)

The product software version is 10.0.1.1(H191SP4C00). Software updates will be released by the

manufacturer to bugs or enhance functions after the product has been released. All software versionsx

released by the manufacturer have been and are still compliant with the related rules.veried

All RF parameters (for example, frequency range and output power) are not accessible to the user, and cannot

be changed by the user.

For the most recent information about accessories and software, please see the DoC (Declaration of

Conformity) at .http://consumer.huawei.com/certication

Please visit http://consumer.huawei.com/en/support/hotline for recently updated hotline and email address in

your country or region.

Conguration

1 Placez le support sur le routeur.



Le support aide à maintenir le routeur droit pour améliorer sa réception du signal Wi-Fi.

2 Assurez-vous d'utiliser la bonne carte SIM.

mini-SIM (2FF) micro-SIM (3FF) nano-SIM (4FF)

3 Insérez avec précaution la carte SIM dans le logement Logement de carte SIM, dans le sens indiqué dans la

gure ci-dessous, jusqu’à entendre un clic.

lPour retirer la carte SIM, exercez une légère pression sur la carte SIM jusqu’à entendre un clic. La

carte ressort automatiquement.

lÉvitez d'insérer ou de retirer une carte SIM lorsque le routeur fonctionne, car cela risque de nuire

aux performances ou d'endommager la carte SIM.

4 Branchez l'adaptateur secteur au routeur.

Les voyants s'allument lorsque le routeur est connecté à un réseau.

Voyant d'état du réseau Cyan/bleu : Connecté à un réseau LTE/3G.

Voyant d'intensité du

signal Blanc : Un nombre plus élevé de barres indique un signal plus puissant.

Si le voyant Voyant d'état du réseau est rouge, cela indique qu'il n'y a pas de connexion réseau.

Veuillez consulter la section FAQ de ce guide.

Connexion au réseau Wi-Fi de votre routeur

Wi-Fi Name˖

Wi-Fi Password˖

Wi-Fi Password

Wi-Fi Password：

Une fois le routeur connecté à un réseau de données mobiles, vous pouvez connecter votre ordinateur ou

téléphone mobile au réseau Wi-Fi du routeur pour accéder à Internet. Veuillez vous référer à l'étiquette à

l’arrière du routeur pour connaître le nom (Wi-Fi Name Wi-Fi Password) et le mot de passe par défaut ( ) du

réseau Wi-Fi.

lLorsque l'indicateur Voyant Wi-Fi est allumé de manière permanente, le Wi-Fi est activé. Pour

activer ou désactiver le Wi-Fi, veuillez consulter la page de gestion Web du routeur.

lVeillez à rapidement le nom du réseau Wi-Fi et le mot de passe sur la page de gestionmodier

Web d'empêcher tout accès non autorisé à votre réseau Wi-Fi. Une fois le mot de passean

modié, vous devez vous reconnecter au réseau Wi-Fi du routeur.

Produktspecifikationer

Varumärke:	Huawei
Kategori:	Router
Modell:	B535-232
Färg på produkten:	Rood
Vikt:	970 g
Tillgångar:	1100 W
Mått (B x D x H):	203 x 165 x 280 mm
Förberedelsetid:	2 min