Ikelite 200DL Bruksanvisning

Ikelite Kamera 200DL

Läs nedan 📖 manual på svenska för Ikelite 200DL (35 sidor) i kategorin Kamera. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/35
Product Registration
Please register your product within 15 days of purchase. Our product
registration database is the quickest way for us to contact you in the
event of a product update.
To register, send a photo of the above registration label to us via
ikelite@ikelite.com along with your name, address, and phone
number.
200DL Underwater Housing for Sony Alpha a1,
a7S III
Product # 71476
2
Introduction
Thank you for your purchase of Ikelite products.
Our primary focus is to provide quality, professional grade products
for use in and under water. Our products are designed, manufactured,
and distributed from our sole facility in Indianapolis, USA where we
started in 1962.
We are available if you have any questions or want photo advice.
Send us an email 24 hours a day to ikelite@ikelite.com. We strive to
reply within 1 business day.
An electronic version of this instruction manual is available for
download via the product page on our website:
https://www.ikelite.com
In the Box
Housing
Camera Mount for Sony a1 # 95419
Camera Mount for Sony a7S III # 95415 (installed)
Main O-ring # 0132.59 (installed)
Port O-ring # 0132.45 (installed)
Zoom Gear Retainer # 0072.42 (installed)
Port Hole Cover # 0200.92 (installed)
Waterproof Bulkhead Cap # 9104.7 (installed)
Base with Left-Hand Quick Release Handle (installed)
Hardware Set for Base with Handle # 9523.23 (installed)
Tool for Zoom Gear Retainer # 0945.06
.050” Hex Key # 0945.11
Silicone Lubricant 1cc tube
3
Important Notices
»This housing requires a compatible DL lens port for waterproof
operation (sold separately). The housing is not waterproof
without a DL lens port attached.
»A bulkhead cap or sync cord must be attached to the housing
bulkhead for waterproof operation. Never submerge the
housing in water without either a sync cord or bulkhead cap
attached.
»Do not pull the shutter trigger without a camera installed. You
may accidentally detach or damage the control spring.
»Never leave a housing in a rinse tank, even if it is the only
system in the tank. Accidental damage may occur when the
user walks away from a housing while it is in the rinse tank.
»Do not use alcohol, cleaning agents, spray lubricants, Rain-X,
or other solvents on the housing or lens port. Use of an
incompatible chemical compound can damage the plastic and
o-rings, and may result in leaking.
»If you will be using the system in strong surf it is
recommended to draw a vacuum on the housing using the
optional vacuum pump (sold separately).

Produktspecifikationer

Varumärke: Ikelite
Kategori: Kamera
Modell: 200DL

Behöver du hjälp?

Om du behöver hjälp med Ikelite 200DL ställ en fråga nedan och andra användare kommer att svara dig




Kamera Ikelite Manualer

Ikelite

Ikelite 200DL Bruksanvisning

19 September 2024

Kamera Manualer

Nyaste Kamera Manualer