Inovalley SM121 Bruksanvisning

Inovalley Väderstation SM121

Läs nedan 📖 manual på svenska för Inovalley SM121 (4 sidor) i kategorin Väderstation. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/4

WIRELESS WEATHER STATION

Ref.: SM121 + SM121-B

- OPERATION INSTRUCTION -

1/ MAIN FUNCTIONS

1. Radio-controlled clock

2. Weather forecast for 4 states: sunny, semi-sunny, cloudy, rainy

3. Seven languages to show the day: English, Germany, French, Italian, Spanish, Dutch, Danish

4. Indoor temperature range: 0°C to 50°C, sampling cycle: 12 seconds

5. Indoor humidity range: 20% to 95%

6. Outdoor temperature/ humidity with RF : up to 3 channels

7. In/out trend indication of temperature/humidity

8. Alarm function for upper or lower limit of outdoor temperature

9. Indication of the comfort index

10. The function of Alarm/ Snooze

11. Summer time

12. Moon phase

2/ POWER-ON AND RESET

2.1 Setting up batteries

a) Open the battery compartment on the back of the station and remove plastic protections of 2 batteries.

b) Place the batteries based polarity, and properly close the door.

c) Then open the door to stack probe back and remove plastic protections of batteries.

d) Place the batteries based on polarity, and properly close the compartment.

e) Then wait for about 7 minutes time is automatically displayed.

Note: for manual tuning, see paragraph 3.3.

2.2 When Power-On and reset, LCD full display for 3 seconds  enter the normal state after “Beep”  check temperature

and humidity

1. The calendar defaults 0:00 January 1, 2004

2. Alarm defaults 0:00

3. The weather icon defaults semi-sunny

4. Temperature scales defaults Celsius degree °C.

5. Time system defaults 24Hr.

3/ INSTRUCTION OF OPERATING THE KEYS

3.1 Key functions

Six functional keys: DOWN, UP, SET, ALARM, CHANNEL, SNOOZE.

English

SET ALARM

DOWN

SNOOZE

CHANNEL

Click Alarm

On/Off 12hr/24hr

switchable

°C/°F

switchable

Enter into

snooze state

Switchable

between CH1,

2 and 3

Standard

mode Hold Enter into

clock

setting

Enter into

alarm setting Clear current

registere CH

Click Confirm

the setting One step

forward One step

backward

SET Hold 8

steps/second 8 steps/second

backward

Click Confirm the

setting One step

forward One step

backward

ALARM Hold 8

steps/second

forward

8 steps/second

backward

Click One step

forward One step

backward Choose the

channel

ALARM

temperature Hold 8

steps/second

forward

8 steps/second

backward

3.2 Normal states

A) Hold “SET” for 2 seconds to enter into time setting

B) Click “ALARM” to switch the alarm on/off

C) Hold “ALARM” for 2 seconds to enter into Alarm setting

D) Press “DOWN” to switch between °C/°F

E) When ALARM rings, click “SNOOZE” to enter into the snooze state every 5 minutes

F) Press “CHANNEL” to switch RF channel, CH1 CH2CH3

G) Hold “CHANNEL” key for 2 seconds to clear out all data of current “CHANNEL”

3.3 Manual time set

1. Hold “SET” key for 2 seconds to enter into time setting

2. The sequence of time setting: Year(2000-2099) Month Date  Language  Hour  Minute  Time zone Exit

3. The figures will flash during the setting.

4. Press “SET” to confirm the setting, and enter the next setting state

5. Press “UP” one time, the setting will go ahead for one step; hold the key for 2 seconds, it will run forward by 8

steps/second.

6. Press “DOWN” one time, the setting will backward for one step; hold for 2 seconds, it will run back by 8 steps/second.

7. Moon phase is changed accordingly

8. The system will exit automatically if no key is operated in 8 seconds.

3.4 Alarm set

A) Hold “ALARM” key for 2 second to enter into alarm setting

B) The sequence of alarm setting: Hour  Minute  exit

C) The figures will flash during the setting.

D) Press “ALARM” to confirm the setting, and enter the next setting state

E) Press “UP” one time, the setting will go ahead for one step; hold the keys for 2 seconds, it will run forward by

8 steps/seconds.

F) Press “DOWN” one time, the setting will backward for one step; hold for 2 seconds, it will run back by 8 steps/second.

G) The system will exit automatically if no key is operated in 8 seconds.

4/ FUNCTION AND EFFECT

4.1 The receiving function of RF

A) After installing the battery and checking temperature/humidity, it will enter RF receiving state automatically for 3 minutes.

B) Under normal display mode, hold the “CHANNEL” key for 2 seconds to clear out the channel information

C) If there is no effective signal with same ID code received for the current channel in 35 minutes, the temperature of

that CH will shows “--.-“.

D) The temperature display will resume back when the correct signal is received again

FONCTION

OPERATION

4.2 The function of alarm

A) The BUZZER will ring for 2 seconds as below:

a. 0 – 10 sec.: 1 “beep” for second

b. 10 – 20 sec.: 2 “beep” for second

c. 20 – 30 sec.: 4 “beep” for second

d. after 30 sec.: “beep” continuously

B) When ringing, click “SNOOZE” key once to enter into 5 minutes snooze states, exit if any other key is clicked.

C) Under snooze state, it will start ringing again if another alarm time is due.

4.3 RCC receiving function

1. How to enter RCC receiving status:

a. It will enter RCC receiving state automatically 3 minutes after powering ON or resetting.

b. It enters RCC receiving automatically at 2:00, 3:00, 4:00, 5:00 everyday.

c. Press “DOWN” key for 2 seconds to enter RCC receiving status forcibly.

2. RCC receiving time is 7 minutes.

3. When it is receiving signals, press “DOWN” key will exit RCC receiving status, pressing any other key will have no

effect.

4. When DST is able and is receiving the signal, it will display the symbol of sun on the LCD, showing that it enters the DST

system, and the time will be 1 hour faster.

5. When the RCC symbols display fully, the relative RCC icon will be OFF if the present time is changed.

4.4 The function of temperature and humidity

A) The indoor temperature range: 0°C to +50°C (32°F to +122°F)

B) The humidity range: 20% to 95%

C) The outdoor temperature range: - 50°C to +70°C (-58°F to +158°F)

D) Sampling period: 12 seconds.

E) The accuracy of temperature: +/- 1°C

F) The temperature and hygrometer sampling will be held when the alarm is ringing

4.5 The function of weather forecast

The weather icons for 4 states: sunny  semi-sunny  cloudy  rainy

DETAILS AND PRECAUTIONS ON THE USE OF BATTERIES :

- Discard a used battery in nature or garbage pollutes and prevents the recovery of recyclable materials.

It is therefore important to limit consumption of batteries and follow these guidelines:

 focus on alkaline batteries (that last longer than the saline batteries) and when possible, rechargeable

batteries

 deposit batteries and accumulators in specific containers arranged among traders.

For example, metals will be valued and polluted the environment because they contain heavy metals

hazardous to health and the environment primarily (cadmium and nickel)

- The piles must installation by respecting the polarity indicated on the apparatus and the pile.

An incorrect positioning can is to damage the apparatus, is to cause escapes on the level of the pile, is to the extreme to cause a fire or the

explosion of the pile.

- To ensure proper operation, the batteries must be in good condition. In case of abnormality in the functioning of the device, put fresh

batteries

- Never attempt to recharge non-rechargeable batteries. They could run, warm up, causing a fire or explosion.

- Replace all batteries at the same time. Never mix zinc batteries with alkaline batteries or rechargeable batteries

- The batteries must be removed from the device

- Also, remove the batteries from your device if you do not use it for a long time, if the batteries may leak and cause damage.

- Never try to short-circuit the battery terminals

- Never dispose of batteries in fire, they might explode

- Charging of batteries is to be performed by an adult.

- Remove batteries from the device before reloading.

- We recommend an adult to supervise children when they change the batteries so that these instructions are complied with or to make

himself the replacement of batteries.

- If a battery is swallowed, immediately consult a doctor or poison control center nearest you.

Do not forget to carry the product with you

Produktspecifikationer

Varumärke:	Inovalley
Kategori:	Väderstation
Modell:	SM121
Färg på produkten:	Zwart
Bredd:	640.1 mm
Djup:	35.3 mm
Höjd:	431.8 mm
Förpackningens vikt:	11160 g
Förpackningens bredd:	692.2 mm
Djuppackning:	459.7 mm
Förpackningshöjd:	660 mm
Användarmanual:	Ja
Monteringsmetod:	Muur
Maximal viktkapacitet:	27.22 kg
Panelmonteringsgränssnitt:	200 x 100,200 x 200,300 x 200,300 x 300,400 x 200,400 x 300,400 x 400 mm
Horisontellt vridbar:	35 - 35 °
Kompatibilitet med monteringsgränssnitt (min):	200 x 100 mm
Kompatibilitet med monteringsgränssnitt (max):	400 x 400 mm
Tiltvinkelområde:	0 - 10 °
Maximal skärmstorlek:	50 "
Minsta skärmstorlek:	32 "
Djup (max):	213.9 mm