IQE Simplicity 35 Bruksanvisning

IQE Pannor & pannor Simplicity 35

Läs nedan 📖 manual på svenska för IQE Simplicity 35 (12 sidor) i kategorin Pannor & pannor. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/12

iQ© SIMPLICITY

25-30-35-20 T-25 T-30 T

USER INSTRUCTIONS

ENSURE THAT THESE

INSTRUCTIONS ARE LEFT

FOR THE USER AFTER

COMPLETION OF THE

BENCHMARK SECTION

PLEASE READ THE

IMPORTANT NOTICE

WITHIN THIS GUIDE

REGARDING YOUR BOILER

WARRANTY

only the combi version

IQ© SIMPL IC ITY 25-30-35

benchmark

CaiKHVEMAm

i Q G

Cleve r En erg y

IMPORTANT NOTICE

For the firs t ye ar all of our appliances are protected by our m an ufacturer’s guarantee which covers

both parts and labour.

As you would expect f r o m ^ © , it is o ur aim to provide our valued custom ers with the best in after

sales and service. To take advantage of any extended w arran ty offered, all you have to do is to

adhere to these 3 s imple conditions:

• The installation must be carried out to M anufa ctu re rs/B ench m ark Standards by a Gas Safe

Registered Engineer, and recorded in the installation manual.

• The appliance must be registered with b o t h ^ © and Gas Safe within 30 days of installation.

• The appliance must be serviced annually, by a Gas Safe registered engineer-ensuring that the

Benchm ark service record in the installation m anual is completed.

Failure to comply with the above w ill result in only the 12 month w arran ty being offered.

In the absence of any proof of purchase, the 12 month w arranty period w ill commence fro m the date

of manufacture of the boiler as shown on the appliance data plate.

AH descrip tion s and illu s tratio n s provided in th is m a nual have been c a re fu lly prepa re d but w e reserve the rig ht to make

changes and im prov em ents in o ur p roducts tha t m ay affect the accuracy of the inform ation contained in this m anual.

Code Of Practice

For the installation, commissioning and servicing

of domestic heating and hot water products

Benchmark places responsibilities on

both manufacturers and installers.*

The purpose is to ensure that

customers** are provided with the

correct equipment for their needs, that it

is installed, commissioned and serviced

in accordance with the manufacturer’s

instructions by competent persons

and that it meets the requirements of

the appropriate Building Regulations.

Installers are required to carry out work

in accordance with the following:

Standards of Work

• Be competenl and qualiﬁed to undertake the work

required.

• Install, commission, service and use products in

accordance with the manufactLirer's instructions provided.

• Ensure that where there is responsibility for design work,

the installation is correctly sized and fit for purpose,

• Meet the requirements of the appropriate Building

Regulations, Where this involves notiﬁable work be a

member of Competent Persons Scheme or conﬁrm thata

the customer has notiﬁed Local Authority Building Control

(LABC), prior work commencing.10

• Complete all relevant sections of the Benchmark

Checklist/Service Record when carrying out

commissioning or servicing of a product or system.

• Ensure that the product or system is left in a safe

condition and, whenever possible, in good working order.

• Highlight to the customer eny remedial or improvement

work identiﬁed during the course of commissioning or

servicing work.

• Refer to the manufacturer's helpline where assistance is

needed,

• Report product faults and concerns to the manufacturer

in a timely manner,

m N VK. DF D UR im Ftfi THE IHSTRL1AT1W. CDMﬀﬁSIDHIHD

W SHTOHC KWEFtlC PeRTWS W WHtiTtf tFFIWS

'Ttia irse of tlw woR] "installer" Is not llinltecl to Installatlart Itsall and cavers

ttiose carrylrts sul Inetallalion, commissioning and/or setviang of heating

and hot watet products, or me use of supporting products (such as water

VeatmenL or test egulpmenl).

"Oastomer Includes householders, landlords and tenants.

Customer Service

* Show the customer any identity card that is relevant to

the work being carried out prior to commencement or on

request,

* Give a full and clear expianation/demonstration of the

product or system and its operation to the customer.

* Hand over the manufacturer's instructions, including the

Benchmark Checklist, to the customer on completion of

an installation,

* Ctitain the customer’s signature, on the Benchmark

Checklist, to conﬁrm satisfactory demonstration and

receipt of manufacturer's in struct ions.

* Advise the customer that regular product servicing is

needed, in line with manufacturers' recommendalaons,

to ensure that safety and eﬀciency is maintained.

* Respond promptly to calls from a customer following

completion of work, providing advice and assistance by

phone and, if neoessaiy, visiting the customer.

* Rectify any installation problems at no cost to tha

customer during the installer’s guarantee period,

Produktspecifikationer

Varumärke:	IQE
Kategori:	Pannor & pannor
Modell:	Simplicity 35

Behöver du hjälp?

Om du behöver hjälp med IQE Simplicity 35 ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Pannor & pannor IQE Manualer

IQE Simplicity 25 Bruksanvisning

27 Augusti 2024

IQE Comfort Bruksanvisning

27 Augusti 2024

IQE Simplicity 35 Bruksanvisning

27 Augusti 2024

Pannor & pannor Manualer

Nyaste Pannor & pannor Manualer

Philips AquaShield AWH5319 Bruksanvisning

13 Mars 2025

Corberó CTEV350 Bruksanvisning

10 Mars 2025

Corberó CTM80 Bruksanvisning

10 Mars 2025

Midea M2605 Bruksanvisning

27 Februari 2025

Midea JSD12-6DH4 Bruksanvisning

27 Februari 2025

Midea JSD20-10DH4 Bruksanvisning

27 Februari 2025

Stiebel Eltron SHC 15 AU Bruksanvisning

27 Februari 2025

Stiebel Eltron SNU 5 Plus Bruksanvisning

27 Februari 2025

Stiebel Eltron DEM 6 Bruksanvisning

27 Februari 2025

Stiebel Eltron DHCE 8/50 Bruksanvisning

27 Februari 2025