JBL Cinema SB 100 Bruksanvisning

JBL hi-fi system Cinema SB 100

Läs nedan 📖 manual på svenska för JBL Cinema SB 100 (7 sidor) i kategorin hi-fi system. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/7

CINEMA SB100

powered soundbar speaker

quICk-StArt guIdE

thANk You For ChooSINg thIS JBL®

ProduCt

The JBL Cinema SB100 powered soundbar speaker is a complete,

integrated sound system that will dramatically improve the sound

of programs you watch on your television. It can mount on a wall

or sit on a shelf and includes all of the cables you need to connect

it to your TV and your cable/satellite tuner or disc player.

We’re confident that this JBL system will provide every note

of enjoyment that you expect – and that when you think about

purchasing additional audio equipment for your home, car or

office, you will once again choose JBL products.

This quick-start guide contains all the information you need to set

up, connect and adjust your new speaker system. For more in-

depth information, go to our Web site: www.jbl.com.

INCLudEd ItEMS

BASS

SouNdBAr rEAr-PANEL CoNtroLS ANd

CoNNECtIoNS

Power Switch

Power Cord

Connector

Subwoofer

Output Connector

EQ Switch

Optical Input

Connector

Aux Input

Connector

Subwoofer Output connector: If you are using a powered subwoofer

(not supplied) with your soundbar, connect it here. This Note:

connector outputs a low-pass filtered signal, so connect it to an input

on your subwoofer that bypasses the subwoofer’s built-in crossover

network. Consult your subwoofer’s owner’s manual for instructions

about connections and adjustments.

EQ switch: Use this switch to adjust the soundbar’s bass for either wall

or table mounting. If you’re mounting the soundbar on a wall with the

included wall-mount bracket, set the EQ switch to the “Wall” position

for the most natural-sounding bass performance. If you are placing the

soundbar on a table, set the EQ switch to the “Table” position for the

most natural-sounding bass performance.

Optical Input connector (digital): If your TV, disc player or cable/

satellite tuner has an optical digital output, use the included optical

cable to connect it here.

NOTE: You can connect different source components to the analog and

digital connections.

Aux Input connection (analog): Use the included stereo 3.5mm to

stereo RCA audio cable to connect the stereo analog outputs of your

TV, disc player or cable/satellite tuner here.

Power switch: Set this switch to the “On” position to activate the

soundbar. In normal operation, this switch will be left in the “On”

position. See

Turning the Soundbar On and Off

, on page 5, for more

information.

Power Cord connector: Connect the included power cord here. See

Power Connections

, on page 5, for more information.

IMPORTANT: Do not connect the power cord to an AC outlet until you

have made and verified all other connections.

If you will not be using the soundbar for an extended period – for

instance, if you’re going on vacation – set the Power switch to the “Off”

position.

SouNdBAr toP-PANEL CoNtroLS ANd

rEMotE CoNtroL

Volume

Buttons

Source

Button

Surround

Button

Power

Button

BASS

Volume Buttons

Surround Mode

Button

Power Button Mute Button

Bass Boost

Button

Source Button

Power button: To turn the soundbar on when it is in the Standby

mode, press the Power button on either the soundbar or the remote.

(The Power indicator will turn white.) To put the soundbar in the

Standby mode, press either Power button while the system is on.

(The Power indicator will turn amber.) If you do not press the Power

button, the soundbar will automatically go into the Standby mode

approximately 10 minutes after the audio signal ceases.

NOTE: If you put the soundbar into the Standby mode by pressing

the Power button, you must manually turn it on by pressing the Power

button again. If the soundbar automatically goes into the Standby

mode 10 minutes after the audio signal ceases, it will automatically

turn on whenever the soundbar detects an audio signal at either input

connection.

Mute button (remote control only): Press the Mute button to mute

the soundbar. (The Volume +/– indicators both illuminate white.) While

the system is muted, press the Mute button again or either Volume

button to restore the sound.

NOTE: Pressing both of the soundbar’s Volume buttons at the same

time while the system is on will mute the system. Pressing either

Volume button while the system is muted will restore the sound.

Surround Mode button: This button turns the soundbar’s HARMAN

Display Surround processing on and off. The Surround button indicator

turns amber when HARMAN Display Surround is active, and turns white

when HARMAN Display Surround is not active (normal stereo sound).

See

Surround Mode Buttons

, on page 6, for more information.

Volume Up/Down buttons: Press the “+” button to increase the

volume; press the “–” button to decrease the volume. The buttons

illuminate white for a few seconds after being pressed.

Source Selector button: This button switches between the sources

connected to the Aux (analog) and Optical (digital) inputs. When the Aux

input is active, the Source indicator turns white; when the Optical input

is active, the Source indicator turns amber.

Bass Boost button (remote control only): Press the remote’s

Bass Boost button to enhance low-frequency performance. Pressing

the Bass Boost button again will return the soundbar’s normal low-

frequency performance.

www.jbl.com

English

SouNdBAr PLACEMENt

PLACING THE SOUNDBAR ON A TABLE

If your TV is placed on a table, you can place the soundbar on the table

directly in front of the TV stand, centered with the TV screen. As long

as the surface of the table is flat, the soundbar will rest on its rubber

bumpers.

• Set the soundbar’s EQ switch in the “Table” position. See Soundbar

Rear-Panel Controls and Connections, on page 2.

WALL-MOUNTING THE SOUNDBAR

If your TV is attached to a wall, you can use the included wall-mount

bracket to mount the soundbar on the wall directly below the TV

screen.

1. Determine the location for the soundbar on the wall. Make sure that

the top of the soundbar will not block your view of the TV screen

when it is mounted on the wall.

2. Hold the bracket against the wall as a template and mark the

locations of the soundbar wall-mount bracket holes on the wall. The

two holes should be spaced 4-9/16" (115mm) apart, and the bracket

slots are designed to accept 4mm screws. Make sure that the holes

are at the same height. See the illustration below.

Mark Bracket Hole Locations

4-9/16" (115mm) Apart

3. Attach the wall-mount bracket to the wall at the locations you

marked, using hardware that is appropriate for the wall’s construction

and materials. Note that the soundbar weighs 2.5kg (5.5 lb). Be sure

to use hardware that can support this weight.

Before you tighten the mounting screws all the way, use a carpenter’s

level, laser sight or other device to check if the bracket is level. The

bracket’s slots allow you to adjust the bracket’s angle on the wall to

ensure that it is level. Once the bracket is level, tighten the mounting

screws.

4. After reading the section on page 4, bring all the cables Connections

through the opening in the bracket, as shown in the illustration

below, and connect them to the soundbar.

IMPORTANT: Do NOT plug the soundbar’s power cord into an AC

outlet at this time.

Bring all

Cables Through

Bracket Opening

• Set the soundbar’s EQ switch in the “Wall” position, and set the

soundbar’s Power switch in the “On” position. See Soundbar Rear-

Panel Controls and Connections, on page 2.

5. Attach the soundbar to the bracket by sliding the bracket’s upper

tabs into the slots at the top of the soundbar’s connector section.

The bracket’s lower tabs should snap into the slots on the botton of

the soundbar (If necessary, rotate the front of the soundbar down

slightly to get the tabs into the slots.)

Insert Tabs on Bracket

into Slots on Soundbar

Produktspecifikationer

Varumärke:	JBL
Kategori:	hi-fi system
Modell:	Cinema SB 100
Färg på produkten:	Wit
Vikt:	385 g
Djup:	168 mm
Snäll:	IP-beveiligingscamera
Användarmanual:	Ja
Blåtand:	Nee
Vormfaktor:	Rond
Placeringsstöd:	Binnen & buiten
Anslutningsteknik:	Bedraad en draadloos
Ethernet LAN:	Nee
Monteringsmetod:	Plafond/muur
Videolägen som stöds:	1080p
Maximal upplösning:	1920 x 1080 Pixels
Totalt antal megapixlar:	2 MP
Diameter:	68 mm
Typ av strömkälla:	DC
Strömutgång (volt):	12
Strömutgång (ampere):	0.8 A
Minimal belysning:	0.01 Lux
Antal kameror:	1
Inbyggd hårddisk:	Nee
Nattseende:	Ja
LED-typ:	IR
Video rörelsedetektering:	Ja
Brännvidd:	2.8 - 12 mm
Optisk sensorstorlek:	1/2.9 "
Bildsensortyp:	CMOS
Optisk zoom:	4 x
PTZ-kontroll:	Ja
Panoreringsintervall:	0 - 180 °
Dag/nattläge:	Ja
Antal linser:	1
Styr kamerapanorering:	Ja
Kameralutningsfunktion:	Ja
Svänghastighet:	10 °/sec
Pannhastighet:	20 °/sec
BNC utgångsportar:	1
Antal sensorer:	1
Night vision scope:	25 m
Antal LED-belysning:	6
Bakgrundsljuskompensation:	Ja
Wifi:	Nee
Drifttemperatur (TT):	0 - 50 °C
Tiltvinkelområde:	0 - 55 °
Mask privat zon:	Ja
Digital Wide Dynamic Range (DWDR):	Ja