Jotul GF 200 DV IPI Bruksanvisning

Jotul Inte kategoriserad GF 200 DV IPI

Läs nedan 📖 manual på svenska för Jotul GF 200 DV IPI (36 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/36

Jøtul GF 200 DV IPI

Direct Vent Gas Stove

Installation and

Operation Instructions

– Do not store or use gasoline or other

ammable vapors and liquids in the

vicinity of this or any other appliance.

– WHAT TO DO IF YOU SMELL GAS

• Do not try to light any appliance.

• Do not touch any electrical switch; do

not use any phone in your building.

• Immediately call your gas supplier

from a neighbor’s phone. Follow the gas

supplier’s instructions.

• If you cannot reach your gas supplier, call

the re department.

– Installation and service must be performed

by a qualied installer, service agency or

the gas supplier.

– In the Commonwealth of Massachusetts,

a carbon monoxide (CO) detector shall

be installed in the same room as the

appliance.

WARNING: If the information in these

instructions is not followed exactly, a re or

explosion may result causing property damage,

personal injury or loss of life.

This appliance may be installed in an aftermarket,

permanently located, manufactured home or

mobile home, where not prohibited by local codes.

This appliance is only for use with the types of gas

indicated on the rating plate. A conversion kit is

supplied with the appliance.

INSTALLER: Leave this manual with the appliance.

CONSUMER: Retain this manual for future reference.

























139587_10 GF 200 DV IPI April 2018

THIS OWNER’S MANUAL PROVIDES INFORMATION TO

ENSURE SAFE INSTALLATION AND EFFICIENT, DEPENDABLE

OPERATION OF YOUR FIREPLACE INSERT. PLEASE READ

THESE INSTRUCTIONS IN THEIR ENTIRETY AND MAKE THEM

AVAILABLE TO ANYONE USING OR SERVICING THIS GAS

INSERT.

DO NOT ATTEMPT TO ALTER OR MODIFY THE CONSTRUCTION

OF THIS APPLIANCE OR ITS COMPONENTS. ANY

MODIFICATION OR ALTERATION WILL VOID THE WARRANTY,

CERTIFICATION AND LISTING OF THIS APPLIANCE.

THIS HEATER MUST BE INSTALLED AND MAINTAINED BY A

QUALIFIED SERVICE AGENCY.

Suggested Tools for

Installation and Service

• External regulator (for Propane only)

• Piping which complies with local code

• Manual shut-o valve -

T-Handle required in Massachusetts

• Sediment trap - if required by code

• Tee joint

• Pipe wrench

• Pipe sealant

• 10 mm open end wrench

• 1/2”, 7/16” open end wrench

• Phillips head screwdriver

• Flat head screwdriver

• 1/4” nut driver

• Gloves

• Safety glasses

• Torx T-20 screwdriver

• Tin snips

Installation Requirements for the

Commonwealth of Massachusetts

THIS PRODUCT MUST BE INSTALLED BY A LICENSED MASTER

OR JOURNEYMAN PLUMBER OR GASFITTER WHEN INSTALLED

IN THE COMMONWEALTH OF MASSACHUSETTS.

1. If there is not one already present, on each oor level

where there are bedroom(s), a carbon monoxide detector

and alarm shall be placed in the living area outside the

bedroom(s). The carbon monoxide detector shall comply

with NFPA 720 (2005 Edition).

2. A carbon monoxide detector shall:

a) Be located in the room that houses the appliance or

equipment;

b) Be either hard-wired or battery powered or both; and

c) Shall comply with NFPA 720 (2005 Edition).

3. A Product-approved vent terminal must be used, and

if applicable, a Product-approved air intake must be

used. Installation shall be in strict compliance with the

manufacturer’s instructions. A copy of the installation

instructions must remain with the appliance or equipment

at the completion of the installation.

INITIAL FIRING PROCESS -

Heat-curing the Paint and Log Set

This appliance has been painted with the

highest quality coating used in the hearth

industry. Manufacturers have selected this

product because it has been proven durable,

colorfast, and beautiful at temperatures up to

1200°F/650°C. Although the paint has been

air-dried at the factory, it must be heat-cured

in order to maximize its coating properties and

durability. This process occurs during initial

ring of the appliance and will generate odor

and some visible smoke.

We recommend you do the following BEFORE

operating the appliance for the rst time:

1. Ventilate: Open doors and windows and use

a fan to circulate fresh air throughout the

room.

2. Vacate: The fumes are non-toxic, but can

be uncomfortable for babies, small children,

pregnant women, elderly, pets, or anyone

having breathing diculties.

Gas Appliance Curing Process

1. After the installer has conrmed proper

burner function at all heat levels, the

homeowner should operate the appliance at

a low setting for 2-4 hours, followed by 2-4

hours operation at a high setting.

2. O-gassing by paint and log set ceramic

material may leave a white, powdery deposit

on the inside surface of the glass panel.

This residue must be removed using a non-

abrasive household glass cleaner or warm

water to prevent permanent etching of the

glass.

DO NOT USE AMMONIA-BASED CLEANERS.

See Section 8, OPERATION for detailed, day-to-

day operating procedures.

Natural Gas / 67.21%

Propane / 71.05%

Jøtul GF 200 DV IPI

Based on CSA P.4.1-15

139587_10 GF 200 DV IPI April 2018

Jøtul GF 200 DV IPI

Lillehammer

Manufactured and Distributed by:

Jøtul North America

55 Hutcherson Dr.

Gorham, Maine 04038

We recommend that

our gas products be

installed and serviced by

professionals who are

certied in the U.S. by

the National Fireplace

Institute® (NFI) as NFI Gas

Specialists.

Certied Test Standards

This appliance complies with National Safety stan-

dards and is tested and listed by Intertek Testing Ser-

vices of Middleton, Wisconsin to ANSI Z21.88-2016,

CSA 2.33-2016, and CAN/CGA 2.17-M91.

Table of Contents

Service Tools ..................................................2

Specications 4 ..................................................

Unpacking the Stove 4 ...................................

General Information 5 .....................................

Safety Information 5 .......................................

Installation Requirements 6 ..........................

Location 6 .....................................................

Hearth Protection ....................................6

Clearances 6 ...................................................

Mantel & Trim 7 .............................................

Alcove 7 ..........................................................

Venting Requirements 8 ............................

Vent Restriction 8 .........................................

Termination Matrix...................................9

Bae & Deector Use 10 ...........................

Vertical Termination 11 ..............................

Horizontal Termination 14 ........................

Vent Terminal Clearances 15 ...................

Fuel Conversion 16 ...........................................

Gas Connection 18 ............................................

Gas Pressure 19 ..................................................

High Altitude Adjustment 19 ........................

Optional Brick Panel Installation 20 ...........

Optional Wall Thermostat .........................20

Log Set Installation 21 .....................................

System Check 22 ...............................................

Flame Picture Adjustment 23 ........................

Operation .......................................................24

Maintenance 26 .................................................

Glass Replacement 26 .................................

Optional Blower 27 ..........................................

Appendix 29 ........................................................

Wiring Diagram 29 .......................................

Mobile Home Requirements 29 ..............

Illustrated Parts Lists 30-33 .......................

Accessory Listing 33 ...................................

Warranty Statement 34 ...................................

Lighting Instructions ..................................35

Direct Vent Gas Heater

Produktspecifikationer

Varumärke:	Jotul
Kategori:	Inte kategoriserad
Modell:	GF 200 DV IPI

Behöver du hjälp?

Om du behöver hjälp med Jotul GF 200 DV IPI ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Inte kategoriserad Jotul Manualer

Jotul GF 200 DV IPI Bruksanvisning

25 September 2024

Jotul GF 200 DV II Bruksanvisning

25 September 2024

Jotul GF 200 DV Bruksanvisning

25 September 2024

Jotul GF3 BV Allagash Bruksanvisning

25 September 2024

Jotul GF600 DV II Firelight Bruksanvisning

25 September 2024

Jotul GF3 DVII Allagash Bruksanvisning

25 September 2024

Jotul F 602 CB Bruksanvisning

25 September 2024

Jotul F 600 CB Firelight Bruksanvisning

25 September 2024

Jotul C 550 Rockland CB Bruksanvisning

25 September 2024

Jotul C 450 Kennebec CF Bruksanvisning

25 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Philips 43PUL7672 Bruksanvisning

27 Oktober 2024

Manhattan 461504 Bruksanvisning

27 Oktober 2024

Sungrow SG125HV Bruksanvisning

27 Oktober 2024

Schneider CCT724319 Bruksanvisning

27 Oktober 2024

Technoline WS 250 Bruksanvisning

27 Oktober 2024

Livarno IAN 354423 Bruksanvisning

27 Oktober 2024

Kupper 12152 Bruksanvisning

27 Oktober 2024

JennAir CARBON24L Bruksanvisning

27 Oktober 2024

Medion Life E74001 (MD 81035) Bruksanvisning

27 Oktober 2024

POLARIS Sportsman Touring 850 SP (2015) Bruksanvisning

27 Oktober 2024