Kenwood KDC-C719MP Bruksanvisning

Kenwood Bilradio/CD-spelare KDC-C719MP

Läs nedan 📖 manual på svenska för Kenwood KDC-C719MP (36 sidor) i kategorin Bilradio/CD-spelare. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/36

KDC-CX89

KDC-C719MP

10 DISC MP3 CD AUTO CHANGER

INSTRUCTION MANUAL

CHANGEUR AUTOMATIQUE DE MP3 CD 10 DISQUES

MODE D’EMPLOI

CAMBIADOR AUTOMATICO DE 10 DISCOS MP3 CD

MANUAL DE INSTRUCCIONES

CHANGER AUTOMÁTICO DE 10 DISCOS MP3 CD

MANUAL DE INSTRUÇÕES

Take the time to read through this instruction manual.

Familiarity with installation and operation procedures will help

you obtain the best performance from your new compact disc

auto changer.

For your records

Record the serial number, found on the back of the unit, in the spaces

designated on the warranty card, and in the space provided below.

Refer to the model and serial numbers whenever you call upon your

KENWOOD dealer for information or service on the product.

Model KDC-CX89MP/C719MP Serial number

©B64-2222-00 (KW/EW)

KDC-CX89/C71(KE)(En,F,Es,P) 02.1.30 1:26 PM Page 1

Warning /Avertissement /Advertencia /Advertência

The marking of products using lasers

(Except for some areas)

The label is attached to the chassis/case and

says that the component uses laser beams that

have been classified as Class 1. It means that

the unit is using laser beams that are of a

weaker class. There is no danger of hazardous

radiation outside the unit.

Marquage des produits utilisant un

laser (Sauf pour certaines régions)

L’étiquette est attachée au chassis/boîtier de

l’appareil et indique que l’appareil utiliser des

rayons laser de classe 1. Cela signifie que

l’appareil utilise des rayons laser d’une classe

faible. Il n’y a pas de danger de radiation

accidentelle hors de l’appareil.

La marca del producto láser

Esta etiqueta está colocada al chasis/a la caja e

indica que el componente funciona con rayos

láser de classe1.

Esto significa que el aparato utiliza rayos láser

considerados como de clase débie. No existe

el peligro de que este aparato emita al exterior

una radiación peligrosa.

A marca dos produtos usando laser

(exceto para algumas áreas)

A etiqueta é presa no chassis/estojo e indica

que o componente utiliza raios laser,

classificados como sendo de Classe 1. Isto

significa que o aparelho está usando raios laser

que são de uma classe mais fraca. Não há

perigo de radiação maléfica fora do aparelho.

Use of controls or adjustments or performance

of procedures other than those specified herein

may result in hazardous radiation exposure.

In compliance with Federal Regulations,

following are reproductions of labels on, or

inside the product relating to laser product

safety.

Location : Rear Panel

FCC WARNING

This equipment may generate or use radio

frequency energy. Changes or modifications to

this equipment may cause harmful interference

unless the modifications are expressly approved

in the instruction manual. The user could lose

the authority to operate this equipment if an

unauthorized change or modification is made.

This equipment has been tested and found to

comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference in a

residential installation. This equipment may

cause harmful interference to radio

communications, if it is not installed and used in

accordance with the instructions. However,

there is no guarantee that interference will not

occur in a particular installation. If this

equipment does cause harmful interference to

radio or television reception, which can be

determined by turning the equipment off and on,

the user is encouraged to try to correct the

interference by one or more of the following

measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the

equipment and receiver.

•Connect the equipment into an outlet on a

circuit different from that to which the receiver

is connected.

•Consult the dealer or an experienced radio/TV

technician for help.

This Class B digital apparatus complies with

Canadian ICES-003.

Cet appareil numérique de la classe B est

conforme à la morme NMB-003 du Canada.

REMARQUE

NOTE

2CAUTION

CLASS 1

LASER PRODUCT

CLASS 1

LASER PRODUCT

CLASS 1

LASER PRODUCT

CLASS 1

LASER PRODUCT

KENWOOD CORPORATION

2967-3, ISHIKAWA-CHO,

HACHIOJI-SHI

TOKYO, JAPAN

KENWOOD CORP. CERTIFIES THIS EQUIPMENT

CONFORMS TO DHHS REGULATIONS N0.21 CFR

1040. 10, CHAPTER I, SUBCHAPTER J.

KDC-CX89/C71(KE)(En,F,Es,P) 02.1.30 1:26 PM Page 2

Safety precautions

Take the following precautions to prevent fire and

avoid personal injury :

•Check that no metal objects (coins, tools, etc.) are

left inside the unit to avoid short circuits.

•If you smell or see smoke, turn the power off

immediately and consult your Kenwood dealer.

Take the following precautions to keep the unit in

proper working order.

•Do not open the top or bottom cover.

•Do not install the unit in places it is exposed to

direct sunlight, high heat or humidity, water may

splash over it, or dust exists.

•Do not install the unit at a dusty place. If the unit is

installed at a dusty place, dust accumulates inside

the unit and unit may be damaged.

•When drilling a hole in the car to fix the brackets,

make sure not to damage the fuel tank, brake tube,

wiring harnesses, etc. on the other side.

•If the unit is installed near speakers, the speakers

vibration may causes a sound skip. Install the unit

as far away as possible from the speakers.

•If you have difficulty in installing this unit in your

vehicle, contact your Kenwood dealer.

•If it doesn't seem to be working properly, first press

the Reset button. If the malfunction persists,

consult your Kenwood dealer.

IMPORTANT INFORMATION

•This unit is NOT designed to be connected directly

to control units that are manufactured and sold

before 1994. If used with such units, an optional

CA-SD200 (sold separately) must be used.

FAILURE TO FOLLOW THESE INSTRUCTIONS

MAY RESULT IN DAMAGE TO THIS UNIT AND

CONTROL UNIT.

Do Not Use Special Shape CDs

•Be sure to use round shape CDs only for this unit

and do not use any special shape CDs. Use of

special shape CDs may cause the unit to

malfunction.

•Be sure to use CDs with disc mark

only for this unit.

•CD-Rs and CD-RWs which have not undergone

finalization processing cannot be played. (For more

information on finalization processing, refer to the

manual for your CD-R/CD-RW writing software or

CD-R/CD-RW recorder.) Additionally, depending on

the recording status, it may prove impossible to play

certain CDs recorded on CD-R or CD-RW.

Do Not Use CDs with Sticker on the

Labeled Side

•Do not use the CD with the label sticker stuck on it.

Using such a CD may cause the CD to be deformed

and the sticker to peel off, resulting in malfunction

of the unit.

Cleaning the unit

•If the front panel is dirty, wipe it clean with a silicon

cloth or soft dry cloth with the power off.

Do not use hard cloths or paint thinner, alcohol, or

other volatile solvents. These may damage external

surfaces or remove indicator characters.

Lens fogging

•In cold climates, there may be a period after you

turn on your vehicle's heater when the lens that

guides the laser beam used in your CD player fogs

up. If this happens, you cannot play compact discs.

Take out discs and the fogging will disappear. If it

does not return to normal after several hours,

contact your Kenwood dealer.

Heat protection

•In warm climates, when vehicles are left standing in

direct sunlight with the windows closed, the

temperature inside can rise above 60°C. The unit's

protection circuits will then display the message

"HOLD" and prevent the player from operating. Just

open the windows or turn on the air conditioning.

As soon as the "HOLD" message disappears, the

player will operate normally.

2CAUTION

NOTE

2CAUTION

2WARNING

KDC-CX89/C71(KE)(En,F,Es,P) 02.1.30 1:26 PM Page 3

Produktspecifikationer

Varumärke:	Kenwood
Kategori:	Bilradio/CD-spelare
Modell:	KDC-C719MP
Tillgångar:	2100 W
Vattentankens kapacitet:	3 l
Vattentillförselslangens längd:	1.345 m
Strömförbrukning (i standby):	15 W
Form:	Vierkant
Maximalt ingående vattentryck:	7 bar
Minsta ingående vattentryck:	1 bar
Rotationsvinkel:	180 °
Typ patron:	Keramisch
AC-ingångsspänning:	230 V
AC-ingångsfrekvens:	50 Hz
Monteringsytas tjocklek (max):	60 mm
Monteringsgrindens diameter:	34 mm
Spakvinkelområde:	-55 - 55 °
Monteringsytas höjd (max):	357 mm
Avstånd från matningsslang till pip:	226 mm
Avstånd från pip till monteringsyta:	254 mm
Strömkabelns-längd:	1.6 m
Diameter patron:	35 mm
Spakdjup (öppen):	63 mm
Spakbredd (öppen):	223 mm
Anslutningsgänga för matningsslangen:	G3/8
Anslutningsgänga för pannslang:	G3/8 + G1/2
Pannbredd:	210 mm
Panndjup:	300 mm
Pannhöjd:	325 mm