Konig KN-DIGICON20 Bruksanvisning

Konig Mixerkonsol KN-DIGICON20

Läs nedan 📖 manual på svenska för Konig KN-DIGICON20 (4 sidor) i kategorin Mixerkonsol. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/4
KN-DIGICON20
DJ MIDI DIGITAL
CONTROLLER
1
A. MIDI CONTROL
ME701 is designed for playing computer based music tracks, and to work with devices that either
support MIDI feedback or not.
This is accomplished by the implementation of several different control modes within ME701.
The control modes are:
1. Special Midi Mode:
Once engaged, ME701 will respond to incoming MIDI message according to its assignment.
LEDs will not do anything unless controlled by an specifi c application (E-MIX,PCDJ) via MIDI.
2. General Midi Mode:
In this mode, all MIDI feedback messages are ignored. A button‘s LED will light then fade away
when pressed.
The buttons, knobs, and sliders will transmit its assigned events to external device through USB
cable.
3. General Midi Mode with Response
Some DJ softwares are able to convey message to this unit to light up the LEDs, and allow this
unit to control the PC software.
PS. Please refer to the function description.
B. PC SOFTWARE SELECT
You can switch this unit to control different PC software.
1) Connect this unit to PC or laptop by USB cable, and then keep pressing the button ”LOAD
DECK A“ until the KILL LED in DECK A stands for the desired PC program mode is light.
HI: This LED lights for SPECIAL MIDI MODE
MID: This LED lights for GENERAL MIDI MODE
LOW: This LED lights for GENERAL MIDI MODE WITH RESPONSE.
2) Press the corresponding knob which LED is light, until the LED is extinguished
3) Unplug the USB cable, and plug it again, then you can use this unit to control the selected
MIDI mode.
4) once the ME-701 is connected to computer, the LEDs are sparking in turn between Search ->
Scratch -> Sync.
In SPECIAL MIDI MODE”, it keep sparking to remind the user that PC software is not
activated.
In General Midi Mode and General Midi Mode with Response, the sparking is keeping few
minutes only, then stop, and all LED lights up slightly.
2
Introduction:
De ri ck view :sc ption ba
1. USB port:
NOTE: The unit can not be power-on before the computer software (Emix) is activated
2. DC- in power for controller

Produktspecifikationer

Varumärke: Konig
Kategori: Mixerkonsol
Modell: KN-DIGICON20

Behöver du hjälp?

Om du behöver hjälp med Konig KN-DIGICON20 ställ en fråga nedan och andra användare kommer att svara dig




Mixerkonsol Konig Manualer

Mixerkonsol Manualer

Nyaste Mixerkonsol Manualer