Lego Exo Force 7721 Bruksanvisning
Läs nedan 📖 manual på svenska för Lego Exo Force 7721 (16 sidor) i kategorin Leksaker. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/16
GB
1
English,1
Contents
Installation, 2-3-4-5
Unpacking and levelling
Connecting the electricity and water supplies
The first wash cycle
Technical data
Description of the washing machine, 6-7
Control panel
Display
Running a wash cycle, 8
Wash cycles and functions, 9
Table of wash cycles
Wash functions
Detergents and laundry, 10
Detergent dispenser drawer
Preparing the laundry
Special wash cycles
Load balancing system
Precautions and tips, 11
General safety
Disposal
Opening the porthole door manually
Care and maintenance, 12
Cutting off the water or electricity supply
Cleaning the washing machine
Cleaning the detergent dispenser drawer
Caring for the door and drum of your appliance
Cleaning the pump
Checking the water inlet hose
Troubleshooting, 13-14
Assistance, 15-16
GB
WMUD 963
Instructions for use
WASHING MACHINE
Downloaded from manuals search enginewww.Manualslib.com
2
GB
Installation
Levelling your appliance correctly will provide it with sta-
bility and avoid any vibrations, noise and shifting during
operation. If it is placed on a fitted or loose carpet, adjust
the feet in such a way as to allow enough room for ventila-
tion beneath the washing machine.
Electric and water connections
Connecting the water inlet hose
1. Connect the supply pipe
by screwing it to a cold
water tap using a 3/4 gas
threaded connection (see
figure).
Before performing the con-
nection, allow the water to
run freely until it is perfectly
clear.
2. Connect the other end of
the water inlet hose to the
washing machine,
screwing it onto the ap-
pliance’s cold water inlet,
situated on the top right-
hand side on the rear of the
appliance (see figure).
3. Make sure there are no kinks or bends in the hose.
! The water pressure at the tap must be within the values
indicated in the Technical details table (on the page 5).
! If the water inlet hose is not long enough, contact a spe-
cialist store or an authorised serviceman.
! Ensure that the supply taps are allowing water through.
Old taps may seize in the closed position and thus pre-
vent water reaching the machine.
! Never use second-hand or old inlet hoses; use the pro-
ducts supplied with the machine.
! Keep this instruction manual in a safe place for future refe-
rence. Should the appliance be sold, transferred or moved,
make sure the instruction manual accompanies the washing
machine to inform the new owner as to its operation and
features.
! Read these instructions carefully: they contain vital infor-
mation on installation, use and safety.
Unpacking and levelling
Unpacking
! This is a separate part of
the polystyrene base and
should be removed with
the base.
! IMPORTANT check
when unpacking your
machine.
1. Unpack the washing machine.
2. Check whether the washing machine has been dama-
ged during transport. If this is the case, do not install it and
contact your retailer.
3. Remove the 4 protective
screws and the rubber bush
with the respective spacer,
situated on the rear of the
appliance (see also the
installation leaflet).
4. Seal the gaps using the plastic plugs provided.
5. Keep all the parts: you will need them again if the wa-
shing machine needs to be moved to another location.
! Packaging materials are not children’s toys.
Levelling
Your machine may make a considerable amount of noise if
the two front feet have not been adjusted correctly.
1. Install the washing machine
on a flat sturdy floor, without
resting it up against walls,
cabinets or anything else.
2. If the floor is not perfectly level, compensate for any
unevenness by tightening or loosening the adjustable front
feet the angle of inclination, measured accor-(see figure);
ding to the worktop, must not exceed 2°.
Downloaded from manuals search enginewww.Manualslib.com
GB
3
Connecting the drain hose
Connect the drain hose,
without bending it, to a
draining duct or a wall drain
situated between 65 and
100 cm from the floor;
The drain hose may be
connected to an under-
sink trap. Before connec-
ting the drain hose from
the machine ensure that
any blanks or removable
ends have been taken off
the spigot.
If it is placed over the edge
of a basin or sink be sure
the free end of the hose
should not be underwater.
! We advise against the use of hose extensions; in case of
absolute need, the extension must have the same diameter
as the original hose and must not exceed 150 cm in length.
Ensure that if the drain hose is pushed into a standpipe, that
the end does not go down more than 15cms (6 inches). If
the hose is pushed down too far, this may cause the machi-
ne to self -syphon ie. continuously empty as it is filling.
Electric connection
Before plugging the appliance into the mains socket, make
sure that:
• the socket is earthed and in compliance with the appli-
cable law;
• the socket is able to sustain the appliance’s maximum
power load indicated on the Technical Data Plate fixed
on the machine;
• the supply voltage is included within the values indica-
ted on the Technical Data Plate fixed on the machine.
• the socket is compatible with the washing machine’s
plug. If this is not the case, replace the socket or the
plug.
Your appliance is now supplied with a 13 amp fused plug
it can be plugged into a 13 amp socket for immediate use.
Before using the appliance please read the instructions
below.
WARNING - THIS APPLIANCE MUST BE EARTHED.
THE FOLLOWING OPERATIONS SHOULD BE CARRIED
OUT BY A QUALIFIED ELECTRICIAN.
Replacing the fuse:
When replacing a faulty fuse, a 13 amp ASTA approved
fuse to BS 1362 should always be used, and the fuse
cover re-fitted. If the fuse cover is lost, the plug must not
be used until a replacement is obtained.
Replacement fuse covers:
If a replacement fuse cover is fitted, it must be of the
correct colour as indicated by the coloured marking or the
colour that is embossed in words on the base of the plug.
Replacements can be obtained directly from your nearest
Service Depot.
Removing the plug:
If your appliance has a non-rewireable moulded plug and
you should wish to re-route the mains cable through parti-
tions, units etc., please ensure that either:
the plug is replaced by a fused 13 ampere rewireable plug
bearing the BSI mark of approval.
or:
the mains cable is wired directly into a 13 amp cable out-
let, controlled by a switch, (in compliance with BS 5733)
which is accessible without moving the appliance.
Disposing of the plug:
Ensure that before disposing of the plug itself, you make
the pins unusable so that it cannot be accidentally inserted
into a socket.
Instructions for connecting cable to an alternative plug:
Important: the wires in the mains lead are coloured in
accordance with the following code:
Green & Yellow Earth
Blue Neutral
Brown Live
65 - 100 cm
Where it connects to
the waste water pipe
cut end off spigot or
remove the blanking cap
Downloaded from manuals search enginewww.Manualslib.com
Produktspecifikationer
| Varumärke: | Lego |
| Kategori: | Leksaker |
| Modell: | Exo Force 7721 |
Behöver du hjälp?
Om du behöver hjälp med Lego Exo Force 7721 ställ en fråga nedan och andra användare kommer att svara dig
Leksaker Lego Manualer
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
26 Oktober 2024
26 Oktober 2024
Leksaker Manualer
- Leksaker IKEA
- Leksaker Ravensburger
- Leksaker VTech
- Leksaker Archos
- Leksaker MJX
- Leksaker Crivit
- Leksaker BeeWi
- Leksaker SereneLife
- Leksaker Smoby
- Leksaker Chicco
- Leksaker Huffy
- Leksaker Jumbo
- Leksaker Easypix
- Leksaker Velleman
- Leksaker Hauck
- Leksaker Sunny
- Leksaker GoGEN
- Leksaker Mattel
- Leksaker Lorelli
- Leksaker Fisher Price
- Leksaker Biltema
- Leksaker Snow Joe
- Leksaker Viessmann
- Leksaker Peg Perego
- Leksaker Kayoba
- Leksaker Salta
- Leksaker Little Tikes
- Leksaker Kinderkraft
- Leksaker Viper
- Leksaker Playmobil
- Leksaker Tamiya
- Leksaker Petsafe
- Leksaker BABY Born
- Leksaker Hasbro
- Leksaker Ingo
- Leksaker Exit
- Leksaker Carrera
- Leksaker Spin Master
- Leksaker Makeblock
- Leksaker MOTA
- Leksaker Syma
- Leksaker Megableu
- Leksaker Chipolino
- Leksaker Valk
- Leksaker Alpha
- Leksaker Arctic Cooling
- Leksaker IMC Toys
- Leksaker Marklin
- Leksaker Mega Bloks
- Leksaker WowWee
- Leksaker Nerf
- Leksaker KidKraft
- Leksaker Geomag
- Leksaker Yuneec
- Leksaker AXI
- Leksaker Thames & Kosmos
- Leksaker Knex
- Leksaker Laptronics
- Leksaker Falk
- Leksaker Silvergear
- Leksaker Kids Knex
- Leksaker Rayline
- Leksaker Pardini
- Leksaker Tiamo
- Leksaker Svexia
- Leksaker Skippy Buddy
- Leksaker Fast Rider
- Leksaker Plusbricks
- Leksaker Playtive
- Leksaker Kogan
- Leksaker Lenoxx
- Leksaker Backyard Discovery
- Leksaker Snap Circuits
- Leksaker Rainbow
- Leksaker BIG
- Leksaker Dynacraft
- Leksaker Cosco
- Leksaker Step2
- Leksaker Quadro
- Leksaker Jamara
- Leksaker Starlyf
- Leksaker Merlin
- Leksaker E-flite
- Leksaker Pure Fun
- Leksaker Dickie
- Leksaker Playland
- Leksaker Hurtle
- Leksaker WLtoys
- Leksaker Style Me Up
- Leksaker Joy-it
- Leksaker Bruder
- Leksaker Hudora
- Leksaker SpinMaster
- Leksaker Kindercraft
- Leksaker Air Wars
- Leksaker Webley
- Leksaker Polly Pocket
- Leksaker AquaPlay
- Leksaker Teksta
- Leksaker Trigano-Jardin
- Leksaker Promedia
- Leksaker Triumph Sports
- Leksaker Bullet
- Leksaker Schleich
- Leksaker Propel
- Leksaker Elenco
- Leksaker Gel Blaster
- Leksaker Nils Fun
- Leksaker Nordic Play
- Leksaker Swurfer
- Leksaker Atomik
- Leksaker Valley Dynamo
Nyaste Leksaker Manualer
27 Oktober 2024
26 Oktober 2024
19 Oktober 2024
12 Oktober 2024
8 Oktober 2024
7 Oktober 2024
7 Oktober 2024
6 Oktober 2024
5 Oktober 2024
5 Oktober 2024