Lowell RPC-15-S Bruksanvisning

Läs nedan 📖 manual på svenska för Lowell RPC-15-S (2 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/2
INTERNAL USE ONLY: PN 24319
Lowell strives to provide accurate information while reserving the right to change specications and/or improve manufacturing methods without prior notication.
©2023 Lowell Manufacturing Co., 100 Integram Dr., Pacic MO 63069, USA / tel. 800.325.9660 / tel. 636-257-3400 / www.lowellmfg.com
Spec 2041
Model RPC-15-S | Rev. 1-10-2023 | pg. 1/2
REMOTE POWER CONTROLS can be combined with a variety of switches or sequencers for an intrinsically
safe, low voltage method of controlling AC power to equipment at remote locations. Controlling power
distribution without directly accessing equipment minimizes the potential for unauthorized access, while
simplifying activation and deactivation of equipment.
Note: RPCs require an external trigger for activation (order separately).
INSTALLATION: The RPC is typically installed near
the equipment to be controlled. Low voltage cable
is run from its terminal strip to a control switch (or
other control method).
Systems can be configured with multiple RPCs
controlled by a single "Maintained Closure"
switch.
Systems can also be configured with a single
RPC controlled by multiple "Momentary Clo-
sure" switches and Lowell's MSM2 module
(which converts momentary closure to main-
tained).
COMPATIBLE DEVICES: (order separately)
SPST Switch (RPS Series): Low voltage wall-
mount or rack-mount switch:
Switch with maintained closure connects
directly to RPC.
Switch with momentary closure requires Low-
ell conversion module MSM2 placed between
the switch and RPC.
Power Sequencer (SEQ Series): A low volt-
age sequencer can be used with the RPC
for time-delayed activation and deactivation
of connected equipment. Lowell standalone
sequencers will require a switch for activation,
while Lowell rack-mount sequencers include a
switch. See product spec sheets for information.
Ideal for Lowell switches featuring main-
tained closure (order separately):
RPSB-P Black wall plate w/rocker switch
RPSW-P White wall plate w/rocker switch
RPSW-KP White wall plate w/key switch
RPSB-R Rack panel w/rocker switch
RPSB-KR Rack panel w/key switch
Certied
US Steel
Made In USA
with Global
Components
Model No.
RPC-15-S
Remote Power Control
actives remote equipment external trigger required
FEATURES
CHASSIS: Steel chassis with black finish and
mounting holes.
Overall Dimensions:
8.00"L x 3.25"W x 1.95"H
POWER:
Power Rating: 125VAC 60Hz 15A
Outlets: NEMA 5-15R duplex
Attached Cord: 6 ft. with NEMA 5-15P plug
SURGE PROTECTION:
Maximum Surge Current: 20,000A
VPR: 400V
Response Time: 1 nanosecond
EMI/RFI Noise Reduction: 20dB@100kHz
Protection Mode: Line to Neutral
Ground Contamination: None
ACTIVATION: Must be connected to an external
control to trigger activation and deactivation:
Dry Contact Closure: Connect to SPST switch,
power sequencer, or independent control sys-
tem with dry contact closure.
: Contact Coil Rating
- Voltage: 24VDC
- Current: 37.5mA
ORIGIN: Made in the U.S.A. with global components
THIRD PARTY APPROVAL: ETL Listed to
UL60065 (U.S. and Canada)
A&E SPECIFICATIONS
The device for remotely controlling AC power shall be Lowell model RPC-15-S, which shall feature a steel
chassis with black powder epoxy nish, 125VAC 60Hz 15A power rating, NEMA 5-15R duplex outlet, 6 ft.
cord with NEMA 5-15P plug, and basic surge protection up to 20,000A. The overall dimensions shall be
8.00"L x 3.25"W x 1.95"H. The unit shall require an external trigger for activation (not included).
INTERNAL USE ONLY: PN 24319
Lowell strives to provide accurate information while reserving the right to change specications and/or improve manufacturing methods without prior notication.
©2023 Lowell Manufacturing Co., 100 Integram Dr., Pacic MO 63069, USA / tel. 800.325.9660 / tel. 636-257-3400 / www.lowellmfg.com
Spec 2041
Model RPC-15-S | Rev. 1-10-2023 | pg. 2/2
Remote Power Control #RPC-15-S
GREEN LED (surge protection)
ON = protection active
OFF = protection compromised
Connect equipment
to be controlled by RPC
6-ft. cord
NEMA 5-15P plug
Connect to appropriate
125VAC power source
RED LED (AC power indicator)
ON = power applied to unit
OFF = no power to unit
TEST SWITCH
TEST = AC power applied to outlets (bypassing external controls)
NORM = external control connections enabled
GREEN LED (outlet power indicator)
ON = power applied to outlets
OFF = no power to outlets
RPC DIAGRAM:
EXAMPLE 1: SPST switch with MAINTAINED closure.
See Lowell RPS Series models listed on pg. 1.
RPC TYPICAL CONTROL METHODS
(low voltage, limited current Class 2 wiring):
EXAMPLE 2: Sequencer or Control System.
Lowell SEQ Series sequencer or control system by others.
EXAMPLE 3: Fire Alarm Panel Interface.
Interface with normally closed (N.C.) contact from Fire Alarm Panel.
+24VDC Out (250mA max.)
Switch
Common
+24VDC Out (250mA max.)
Follow polarity indicators, if any, on sequencer/controller
(rating: 24V, 37.5mA)
ON = connection applied (closed)
OFF = connection removed (open)
Switch
Common
Application Example: The RPC provides power to a music/paging
system in a retail store. The Fire Alarm Panel forces music/paging
system OFF so alarm can be heard.
Switch Schematic
Switch Switch SPST
LED
2.2K 1/2W Resistor Common
+24V Out
Lowell
SPST Switch
with MAINTAINED
closure
Switch
Common
( + )
Com ( – )
No Conn. +24VDC Out (250mA max.)
Fire Alarm
Panel
Sequencer
or Control
System
Model No. Chassis Outlets Input Power Rating Surge Suppression ConnectionsExternal Activation Required
RPC-15 Standalone NEMA 5-15R (2) 6' attached cord 125VAC 60Hz 15A --- Dry contact closure Terminal Strip
RPC-15-S Standalone NEMA 5-15R (2) 6' attached cord 125VAC 60Hz 15A Dry contact closure Terminal StripYes
RPC-15-SCD-RJ Standalone NEMA 5-15R (2) 6' attached cord 125VAC 60Hz 15A Dry contact closure or VT* TS or RJ45Yes
RPC-15-U Standalone IEC C13 (2) 6' detachable cord (2) 100-240VAC 50/60Hz 15A --- Dry contact closure or VT* Terminal Strip
RPC-20-CD Standalone NEMA 5-20R (2) 6' attached cord 125VAC 60Hz 20A --- Dry contact closure or VT* Terminal Strip
RPC-20-SCD Standalone NEMA 5-20R (2) 6' attached cord 125VAC 60Hz 20A Dry contact closure or VT* Terminal StripYes
RPC-20-SCD-RJ Standalone NEMA 5-20R (2) 6' attached cord 125VAC 60Hz 20A Dry contact closure or VT* TS or RJ45Yes
RPC-3N1 Standalone NEMA 5-15R (8) 6' attached cord 125VAC 60Hz 15A --- Dry contact closure Terminal Strip
RPC-4CD Rack-mount NEMA 5-15R (8) 6' attached cord 125VAC 60Hz 15A --- Dry contact closure Terminal Strip
RPC-20-HW Standalone NEMA 20A (2) 6' exible whip 125VAC 60Hz 20A --- Dry contact closure or VT* Terminal Strip
RPC-20-SHW Standalone NEMA 20A (2) 6' exible whip 125VAC 60Hz 20A Dry contact closure or VT* Terminal StripYes
RPC-30-SHW Standalone Twistlock 30A (1) 6'exible whip 125VAC 60Hz 30A Dry contact closure or VT* Terminal StripYes
* VT indicates the RPC can also accept a voltage trigger provided by an independent control system.
T H I S
SPEC

Produktspecifikationer

Varumärke: Lowell
Kategori: Inte kategoriserad
Modell: RPC-15-S

Behöver du hjälp?

Om du behöver hjälp med Lowell RPC-15-S ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Lowell Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer