Makita BO4555 Bruksanvisning
Läs nedan 📖 manual på svenska för Makita BO4555 (8 sidor) i kategorin Sander. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/8
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
DOUBLE INSULATION
IMPORTANT: Read Before Using.
Finishing Sander
BO4555
BO4556
BO4557
BO4558
009089
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model BO4555 BO4556 BO4558 BO4557
Pad size 112mm ×102mm
Orbits per minute (min
-1) 14,000
Dimensions (L x W x H)
131 mm x 112 mm x 142 mm
131 mm x 112 mm x 141 mm
131 mm x 112 mm x 137 mm
Net weight 1.1 kg 1.2 kg 1.0 kg
Safety class /II
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END201-5
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･ Read instruction manual.
･ DOUBLE INSULATION
･ Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible recycling
facility.
ENE052-1
Intended use
The tool is intended for the sanding of large surface of
wood, plastic and metal materials as well as painted
surfaces.
ENF002-1
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN60745:
Model BO4555
Sound pressure level (L
pA) : 80 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Model BO4556
Sound pressure level (L
pA) : 82 dB(A)
Sound power level (L
WA) : 93 dB(A)
Uncertainty (K) : 3 dB(A)
Model BO4557
Sound pressure level (L
pA) : 76 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Model BO4558
Sound pressure level (L
pA) : 79 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model BO4555
Work mode : sanding metal plate
Vibration emission (ah) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
Model BO4556
Work mode : sanding metal plate
Vibration emission (ah) : 3.0 m/s2
Uncertainty (K) : 1.5 m/s2
Model BO4557,BO4558
Work mode : sanding metal plate
Vibration emission (ah) : 3.5 m/s2
Uncertainty (K) : 1.5 m/s2
3
ENG901-1
• The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-14
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Finishing Sander
Model No./ Type: BO4555,BO4556,BO4557,BO4558
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd.
Michigan Drive, Tongwell,
Milton Keynes, MK15 8JD, England
8.4.2009
000230
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, JAPAN
GEA005-3
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
9. If operating a power tool in a damp location is
unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
10. Use of power supply via a RCD with a rated
residual current of 30mA or less is always
recommended.
Produktspecifikationer
| Varumärke: | Makita |
| Kategori: | Sander |
| Modell: | BO4555 |
Behöver du hjälp?
Om du behöver hjälp med Makita BO4555 ställ en fråga nedan och andra användare kommer att svara dig
Sander Makita Manualer
5 Oktober 2024
17 September 2024
14 September 2024
31 Augusti 2024
22 Augusti 2024
15 Augusti 2024
11 Augusti 2024
11 Augusti 2024
9 Augusti 2024
8 Augusti 2024
Sander Manualer
- Sander Bosch
- Sander AEG
- Sander DeWalt
- Sander Arendo
- Sander Silverline
- Sander Ferm
- Sander Workzone
- Sander Ozito
- Sander Gude
- Sander Far Tools
- Sander Tryton
- Sander Hitachi
- Sander Black And Decker
- Sander Vonroc
- Sander Maestro
- Sander Stanley
- Sander Skil
- Sander Hyundai
- Sander Hilti
- Sander Ryobi
- Sander Festool
- Sander Metabo
- Sander Parkside
- Sander Worx
- Sander Meec Tools
- Sander Milwaukee
- Sander Hikoki
- Sander Dremel
- Sander Hazet
- Sander Einhell
- Sander Maktec
- Sander Bort
- Sander Craftsman
- Sander Power Craft
- Sander Powerplus
- Sander Porter-Cable
- Sander Trotec
- Sander Topcraft
- Sander Gamma
- Sander Gastroback
- Sander Matrix
- Sander Kress
- Sander Bavaria
- Sander Flex
- Sander Duro
- Sander Mafell
- Sander Varo
- Sander Max
- Sander Truper
- Sander Kinzo
- Sander Cocraft
- Sander Toolcraft
- Sander RIDGID
- Sander Rupes
- Sander Batavia
- Sander Proxxon
- Sander Fein
- Sander Black Decker
- Sander Stomer
- Sander Elu
- Sander Global
- Sander Rikon
- Sander Duro Pro
- Sander Alpha Tools
- Sander Toolson
- Sander Ribimex
- Sander FIXIT
- Sander Einhell Bavaria
- Sander Ergotools Pattfield
- Sander McKenzie
- Sander Proviel
- Sander Bavaria By Einhell
- Sander THUN
- Sander Pevec
- Sander Handwerk
- Sander TAURUS Titanium
- Sander Stalco
Nyaste Sander Manualer
27 Oktober 2024
20 Oktober 2024
19 Oktober 2024
14 Oktober 2024
14 Oktober 2024
10 Oktober 2024
8 Oktober 2024
8 Oktober 2024
6 Oktober 2024
5 Oktober 2024