Manhattan QuickDock Quattro Bruksanvisning

Manhattan Vagga/dockningsstation QuickDock Quattro

Läs nedan 📖 manual på svenska för Manhattan QuickDock Quattro (12 sidor) i kategorin Vagga/dockningsstation. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/12
QUICKDOCK
QUATTRO
INSTRUCTIONS
MODEL 130370
MAN-130370-UM-ML1-0313-01-0
manhattan-products.com
Important: Read before use. • Importante: Leer antes de usar.
Read from / Write to an external drive
A Quick Dock is commonly used simply to work directly on an external hard disk
drive (HDD).
1. Use the included power adapter to
connect the DC Input jack ( ) to an AC E
outlet.
2. Use the included USB cable to connect
the Dock ( ) to your computer.F
3. Using the spacers ( ) as needed, insert G
up to four drives (2.5” or 3.5”) into the
slots in the Dock: Use ( ) first, then (A B),
then ( ) and, finally, (C D).
4. Press the On/Off button ( ) and make H
sure the Power LEDs ( ) light. When theI
PW (Positioned Well) LED ( ) for the J
corresponding slot lights, that external
drive should display on your computer,
and you can then read or write directly
to it.
One Touch Backup (OTB) from a PC
The OTB function lets you move selected
files from your PC hard drive to a separate
drive placed in the Dock. The software on
the included CD must be installed before
you use OTB.
Note: This PC-based software is not Mac
compatible.
Follow Steps 1-4 above.
Press the OTB button ( ) on the Dock and follow the on-screen instructions in K
the folder (K305BU3OTB) on the enclosed CD. The RW LEDs ( ) indicate the external L
drives in the corresponding slots are being read or written to.
2
ENGLISH
QuickDock Quattro English
Click Eject on your computer before removing a drive from the Dock.
Don’t turn o power to the Dock or remove a drive while any LED is blinking; that is, while any
data transfer is still in progress.
For specications, go to manhattan-products.com.
E
A B C
F
D
I KL
G
H
J
DEUTSCH 3
QuickDock Quattro Deutsch
Klicken Sie auf Auswerfen, bevor Sie eine Festplatte von dem Dock trennenk.
Trennen Sie nicht die Stromverbindung des Docks und entfernen Sie keine Festplatte während
eine der LEDs blinkt. Eine blinkende LED zeigt eine laufende Datenübertragung.
Die Spezikationen nden Sie auf manhattan-products.com.
Direkter Zugriff auf eine externe Festplatte
Ein Quick Dock wird zur Datenverarbeitung auf externen Festplatten verwendet.
1. Verbinden Sie den Stromanschluss ( ) über das beiliegende Netzteil mit einer E
Steckdose.
2. Schlien Sie das Dock ( ) über das F
beiliegende USB-Kabel an Ihren
Computer an.
3. Verwenden Sie die Abstandhalter (G)
falls nötig und setzen Sie bis zu vier
Festplatten (2,5” oder 3,5”) in die Slots
des Docks ein: Verwenden Sie zuerst
(A B C), dann ( ), dann ( ) und zuletzt (D).
4. Dcken Sie den Ein/Aus-Schalter (H)
und achten Sie darauf, dass die Power-
LED ( ) leuchtet. Wenn die PW-LED (I J)
des entsprechenden Slots leuchtet,
sollte die externe Festplatte auf Ihrem
Computer angezeigt werden und Sie
können direkt darauf zugreifen.
One Touch Backup” (OTB) von
einem PC
Mit der OTB-Funktion können Sie
ausgewählte Dateien von Ihrem PC auf
eine Festplatte in dem Dock übertragen.
Die Software auf der beiliegenden CD
muss vor der OTB-Nutzung installiert
werden.
Hinweis: Diese PC-basierte Software ist nicht Mac-kompatibel.
Folgen Sie den oben stehenden Schritten 1-4.
Drücken Sie die OTB-Taste ( ) an dem Dock und folgen Sie den BildschirmanK
weisungen in dem Ordner (K305BU3OTB) auf der beiliegenden CD. Die RW-LEDs
(L) zeigen an, dass auf die externen Festplatten in den entsprechenden Slots
gerade geschrieben oder davon gelesen wird.
E
A B C
F
D
I KL
G
H
J

Produktspecifikationer

Varumärke: Manhattan
Kategori: Vagga/dockningsstation
Modell: QuickDock Quattro

Behöver du hjälp?

Om du behöver hjälp med Manhattan QuickDock Quattro ställ en fråga nedan och andra användare kommer att svara dig




Vagga/dockningsstation Manhattan Manualer

Vagga/dockningsstation Manualer

Nyaste Vagga/dockningsstation Manualer