Marshall JCM 2000 (DSL 100, DSL 50) Valve Heads Bruksanvisning

Marshall Gitarrförstärkare/effekter JCM 2000 (DSL 100, DSL 50) Valve Heads

Läs nedan 📖 manual på svenska för Marshall JCM 2000 (DSL 100, DSL 50) Valve Heads (5 sidor) i kategorin Gitarrförstärkare/effekter. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/5
DSL 100&DSL 50
Valve Heads
JCM 2000
From Jim Marshall
I would like to personally thank you for selecting one
of our JCM 2000 Dual Super Lead valve heads.
Since I started Marshall Amplification in 1962 I have
witnessed some incredible breakthroughs and advances in
amplifier design technology, such as master volume amps,
switchable channels, reverb, MIDI technology, speaker
emulation and digital effects processing, to name just a
few. These may seem like every day features nowadays
but this certainly wasn’t always the case. However, the
same values that were present in the first Marshalls are
still here today. That is, solid workmanship, reliability,
stylish looks and above all great Marshall tone.
The DSL 100 and DSL 50 are our latest all valve heads
and as such are really direct descendants of our classic all
valve heads. Combining all of the aforementioned values
plus a few extra attributes such as versatility, switchable
channels, reverb, a big sound and of course, I am proud to
say, all of the magical Marshall tone that you could want.
The JCM 2000 range is truly a testament to the Marshall
legacy of great guitar products.
I would like to wish you every success with all of your
musical endeavours and also your new Marshall
JCM 2000 Dual Super Lead valve head, which I am sure
you will find a pleasure to play for many years to come.
Yours Sincerely,
ENGLISH
2
WARNING! - Important safety instructions
WARNING: This apparatus must be earthed!
APLEASE read this instruction manual carefully before switching on.
BALWAYS use the supplied mains lead, if a replacement is required please contact your authorised Marshall Dealer.
CNEVER attempt to by-pass the fuses or fit ones of the incorrect value.
DDO NOT attempt to remove the amplifier chassis, there are no user serviceable parts.
ERefer all servicing to qualified service personnel including replacement of fuses and valves.
Servicing is required when the apparatus has been damaged in any way, such as when the power supply cord or plug
is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally or has been dropped.
FNEVER use an amplifier in damp or wet conditions. No objects filled with liquids should be placed on the
apparatus.
GALWAYS unplug this apparatus during lightning storms or if unused for long periods of time.
HProtect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and at the
point where they exit from the apparatus.
IDO NOT switch the amplifier on without the loudspeaker connected.
JENSURE that any extension cabinets used are of the correct impedance.
Note: This equipment has been tested and found to comply with the requirements of the EMC directive (Environments
E1, E2 and E3 EN 55103-1/2) and Low Voltage directive in the E.U.
EUROPE ONLY - Note: The Peak Inrush current for the DSL50 is 33 amps and DSL100 is 40 amps.
Caution: Any changes or modifications not expressly approved by the party responsible for compliance may void the
user’s authority to operate the equipment.
Note: It is recommended that all audio cables, with the exception of the speaker lead, used to connect to the DSL50 and
DSL100 are of a high quality screened type. These should not exceed 10 metres in length.
Always use a non-screened Marshall approved speaker lead with the DSL50 or DSL100 and extension cabinets.
WARNING: Do not obstruct ventilation grilles and always ensure free movement of air around the amplifier!
USA ONLY - DO NOT defeat the purpose of the polarised or grounding type plug. A polarised plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong is provided for your safety. When the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
Follow all instructions and heed all warnings - KEEP THESE INSTRUCTIONS !
ENGLISH
3
!
JCM 2000 Introduction
The Marshall 1959 Super Lead Plexi head and the JCM 800 Master Volume 2203 are recognised the world over as
benchmarks in tone, feel, musical power and sheer size of sound. Imagine then, an amp which is like two footswitchable
1959 Super Leads in one, with the addition of reverb plus extra gain to take you into 2203 territory and beyond. If this
sounds like a dream, it is no longer - now that the JCM 2000 Dual Super Lead range is here.
The 100 Watt DSL 100 and 50 Watt DSL 50 Dual Super Lead heads feature two footswitchable channels, Classic Gain /
Channel A and Ultra Gain / Channel B. As the names imply, each channel has a very different character, with Classic Gain
/ Channel A taking you from a clean to crunch 1959 and then, via a mode switch, up to a 2203 style brute. Ultra Gain /
Channel B takes you from a hot rodded 2203, via a mode switch, to a higher gain response with the addition of mid-boost.
Each channel also has its own individual Reverb level.
The amps also feature a Deep Switch and Tone Shift which are common to both channels. The Deep Switch adds a
resonant bass boost to your sound without muddying it up, while the Tone Shift selector shifts out the mid frequencies
making the amp ideal for brutal metal tones, especially when combined with high gain settings. Their all round versatility
and sheer size of sound make the DSL 100 and DSL 50 superb performance tools for today’s most demanding playing
situations and you can rest assured they are packed full of the famed Marshall TONE.
Please read this handbook carefully before plugging in.

Produktspecifikationer

Varumärke: Marshall
Kategori: Gitarrförstärkare/effekter
Modell: JCM 2000 (DSL 100, DSL 50) Valve Heads

Behöver du hjälp?

Om du behöver hjälp med Marshall JCM 2000 (DSL 100, DSL 50) Valve Heads ställ en fråga nedan och andra användare kommer att svara dig