Maxell IKUtrax MXSP-BT150 Bruksanvisning

Maxell Vagga/dockningsstation IKUtrax MXSP-BT150

Läs nedan 📖 manual på svenska för Maxell IKUtrax MXSP-BT150 (7 sidor) i kategorin Vagga/dockningsstation. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/7
IKUtrax
(MXSP-BTS150)
OUTDOOR BLUETOOTH® SPEAKER
WITH NFC FUNCTION
USER MANUAL
PRODUCT FEATURES
The Maxell IKUtrax is an Outdoor Bluetooth portable Speaker with the following features:
Wireless playback of music from your Bluetooth enabled mobile phone or devices via
the connection Bluetooth
Water Resistant & Dustproof (IP55), and Shock Resistant.
NFC Connectivity
Up to 33 feet (10 meters) line- -sight operating distance of
Hands-free phone conversation
Remotely control your music (play, pause, next track, previous track)
Aux-in connection providing instant 3.5mm stereo audio cable connection to any device.
GETTING STARTED
Carefully remove the unit and all the accessories from the packaging. Please verify
that you have the Quick Start Guide, 3.5mm AUX-in cable and Micro charging USB
cable before recycling the box.
Fully charge your IKUtrax before initial use.
Use the included Micro cable to connect your MXSP-BTS150 to the USB slot of USB
any PC to charge. The RED LED will turn on while charging and will turn off
automatically when fully charged.
PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS
UNIT AND RETAIN THIS GUIDE FOR FUTURE REFERENCE.
PAIRING MODE
From OFF, Push and hold the centre button for 8 seconds. After 5 seconds the
speaker will indicate that it is ON. Keep holding without releasing for another 3
seconds, and the speaker will enter Pairing Mode. The LED light will flash Blue
rapidly.
See your phone/music device manual for pairing instructions.
Then you will hear a voice prompt while the Pairing successful.
LOCATION OF CONTROLS
TOP SIDE
1. FUNCTION BUTTON (ON/ OFF, PLAY/ STOP, PAIR OR PICK UP/ HANG UP)
2. VOLUME UP OR NEXT SONG
3. VOLUME DOWN OR PREVIOUS SONG
4. LED POWER / CHARGING / PAIRING STATUS INDICATOR –
5. NFC PAIRING AREA
6. MICROPHONE
7. HOOK FOR WRIST STRAP
8. 3.5MM AUX IN JACK
9. CHARGING JACK(MICRO USB)
LED INDICATOR
LED COLOUR
DESCRIPTION
Blue ashing every 1 sec.
Power ON
Red ashing every 1 sec.
Power OFF
Blue ashing every 1 sec.
Standby
Blue ashing every 0.1 sec.
Pairing
Blue ashing every 5 sec.
Connected
Blue ashing every 1 sec.
Disconnect ed
Red ashing every 0.1 sec.
Low Power (standby)
Red light on
Charging
FUNCTION BUTTON INDICATOR
Behaviour
Descripon
Press and hold the funcon key for 5 seconds
Power turn on/o
Press and hold the funcon key for 8 seconds
Pairing
Click funcon key once
Answer/End call
Double click funcon key during the incoming
ring.
Reject call
Double click funcon key
(Siri iPhone only) —
Click funcon key once
Play/Pause music
LEFT & RIGHT BUTTON INDICATOR
Behaviour
Descripon
One click the Vol. key ( ) increase; ( ) decrease + -
Adjust Volume
Press and hold the “+” for 3 seconds
Next track
Press and hold the “ ” for 3 seconds-
Previous track
CHARGING INSTRUCTIONS
This unit operates on a built-in Lithium battery that can be recharged either using the USB
port on your computer or from a USB power adaptor (not included) with a rated output of DC
5V, 500mA and up.
Note: The micro USB CHARGING JACK located on this unit is only designed for charging
the built- in Li-ion battery.
CHARGING THE BATTERY FOR FIRST TIME
1.) Charge the built-in Lithium battery a minimum of 3 hours prior to first use. .5
Plug the unit into the USB port on your computer or into a USB power adaptor
(Not included) using the included USB cable.
2.) The LED indicator will turn red while charging and turn-off automatically when the unit is
fully charged. Unplug the USB cable from the power source once the battery is fully
charged.
RECHARGING THE INTERNAL BATTERY
After prolonged use, the internal battery will become weak and the operation may become
intermittent. When the internal battery charge is very low, the Indicator LED will flash red
alerting you to recharge the internal battery as soon as possible .
Plug the Speaker into a USB port on your computer or into DC 5V, 500mA and up a USB
power adaptor (not included) using the included USB cable. Disconnect the USB cable from
the Speaker as soon as it is fully charged.
Charging in Power ON mode
The Indicator LED is RED + BLUE flashing while charging.
The Indicator LED will turn off automatically en the battery is fully wh
charged.
Note: 1. Charging time will vary if you are listening to music while charging the internal
battery. We recommend you switch off the Speaker power during the
charging process.
2. To prolong the life of a rechargeable battery, it is recommended that you
completely discharge it before fully charging it again.
3. Rechargeable batteries need to be cycled for maximum performance and
longer battery life. If you don’t use the speaker that often, make sure to

Produktspecifikationer

Varumärke: Maxell
Kategori: Vagga/dockningsstation
Modell: IKUtrax MXSP-BT150

Behöver du hjälp?

Om du behöver hjälp med Maxell IKUtrax MXSP-BT150 ställ en fråga nedan och andra användare kommer att svara dig


Vagga/dockningsstation Maxell Manualer

Maxell

Maxell IKUtrax MXSP-BT150 Bruksanvisning

21 September 2024
Maxell

Maxell BT3100 Bruksanvisning

21 September 2024

Vagga/dockningsstation Manualer

Nyaste Vagga/dockningsstation Manualer

Pyle

Pyle PHST92IBK Bruksanvisning

20 Oktober 2024
Roberts

Roberts R100 Bruksanvisning

19 Oktober 2024
Yamaha

Yamaha ISX-800 Bruksanvisning

18 Oktober 2024
Polk

Polk BOOM Bit Bruksanvisning

16 Oktober 2024
Vorago

Vorago KSP-600 Bruksanvisning

8 Oktober 2024
IDance

IDance Mini Blaster 2L Bruksanvisning

7 Oktober 2024
Pyle

Pyle PWPBT05BL Bruksanvisning

5 Oktober 2024
Ewent

Ewent EW7018 Bruksanvisning

5 Oktober 2024
Jam

Jam Splash Bruksanvisning

5 Oktober 2024
Denver

Denver BTG-615 Bruksanvisning

5 Oktober 2024