Maxwell MX-25108 Bruksanvisning
Maxwell
Multimeter
MX-25108
Läs nedan 📖 manual på svenska för Maxwell MX-25108 (16 sidor) i kategorin Multimeter. Denna guide var användbar för 12 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/16
U Mser anUal
anwendUngsinforation
Használati Utasítás
ManUal de Utilizare
Užívateľská prírUčka
digital multimeter
digital-multimeter
digitális multiméter
multimetru digital
digitálny multimeter
Product code / Produktcode / Termékkód / Cod produs / Kód produkta:
25108
DT700D
i
EN User Manual
g eneral cHaracteristics
This 3½ digit multimeter is perfect for
measuring DC and AC voltage, DC current,
resistance and diode. It also has a continuity
function and can be used as a logical tester. It is
ideal for work and home use as well.
t He front panel
1. Display
3½ digits, 7 segments, large LCD (27 × 60 mm)
2. Function and range switch
This switch selects the functions and the desired
range. It also turns the device on. To prolong
battery life set it to OFF when you are not using
the device.
3. “5A” banana (wire) connector
Connect the red (positive) measuring wire into
this connector to measure 10A current.
4. “VmA” banana connector
Connect the red measuring wire into this
connector to measure every kind of voltage,
resistance and current (except for 5A)
5. “COM” banana connector
Connect the black (negative) measuring wire
here.
t ecHnical data
DC voltage
Range Resolution Accuracy
200mV 100uV ±0.5% +3D
2000mV 1mV
±1.0% +5D20V 10mV
200V 100mV
300V 1V ±1.2% +5D
Overload protection
220V RMS AC at
200mV range, és
300V DC or 300V RMS
on every range
AC voltage
Range Resolution Accuracy
200V 100mV ±1.2% +10D
300V 1V
Reaction
Average, calibrated
on the RMS of the
sine wave
Frequency range 45Hz ~ 450Hz
Overload protection 300V DC or 300V RMS
on every range
Continuity test with audio signal
Range Description
A built-in beeper
signals if the
resistance is below
30±20Ω
Overload protection 15 seconds maximum
220V RMS
300300
5
300
300V~max
-
1
2
3
4
5
User Manual EN
DC current
Range Resolution Accuracy
2000μA 1μA ±1.8% +2D
20mA 10μA
200mA 100μA ±2% +2D
5A 10mA ±2% +10D
Overload protection 500mA 500V fuse (5A
500V)
Measuring voltage
fallback 200mV
Resistance
Range Resolution Accuracy
200Ω 100mΩ ±1.0% +10D
2000Ω 1Ω ±1.0% +2D
20KΩ 10Ω ±1.0% +2D
200KΩ 100Ω ±1.0% 2D
2000KΩ 1KΩ ±1.0% +2D
Max. open circuit
voltage 3.0V
Overload protection 15 seconds maximum
220V RMS
operation
WARNING
To avoid electric shock and damage to the
device do not measure voltage exceeding 300V!
Always verify the intactness and insulation of
the measuring wires, connectors and other units
before measuring!
DC and AC voltage measuring
connector and the black one to the “COM”
connector.
desired voltage position. If the voltage is
unknown, set the switch to the highest
available range, connect the wires to the
device and the circuit and reduce the range
until the value shown is correct.
DC current measuring
connector and the black one to the “COM”
connector. (For measuring current between
200mA and 5A connect the red wire into the
“5A” connector).
position
serially.
use only. The measuring wire should only be
connected to the circuit for the maximum
of 15 seconds and allow a few seconds in
between measurements.
Resistance measuring
connector and the black one to the “COM”
connector.
position.
Diode measuring
connector and the black one to the “COM”
connector.
” position.
of the measured diode and the black one to
the cathode.
Produktspecifikationer
| Varumärke: | Maxwell |
| Kategori: | Multimeter |
| Modell: | MX-25108 |
Behöver du hjälp?
Om du behöver hjälp med Maxwell MX-25108 ställ en fråga nedan och andra användare kommer att svara dig
Multimeter Maxwell Manualer
6 Oktober 2024
11 Augusti 2024
8 Augusti 2024
3 Augusti 2024
2 Augusti 2024
1 Augusti 2024
25 Juli 2024
Multimeter Manualer
- Multimeter Abus
- Multimeter Alecto
- Multimeter Appa
- Multimeter Amprobe
- Multimeter Amiko
- Multimeter Silverline
- Multimeter Ferm
- Multimeter Milwaukee
- Multimeter Elro
- Multimeter EMOS
- Multimeter Extech
- Multimeter Tacklife
- Multimeter Metrix
- Multimeter Benning
- Multimeter Voltcraft
- Multimeter Somogyi
- Multimeter Velleman
- Multimeter Steren
- Multimeter Kyoritsu
- Multimeter Flir
- Multimeter Digitus
- Multimeter Testboy
- Multimeter Hager
- Multimeter TFA
- Multimeter Clas Ohlson
- Multimeter Powerfix
- Multimeter Owon
- Multimeter Fluke
- Multimeter Basetech
- Multimeter Etekcity
- Multimeter Greenlee
- Multimeter Högert
- Multimeter REV
- Multimeter Keithley
- Multimeter Monacor
- Multimeter Metrel
- Multimeter Multimetrix
- Multimeter Digi-tool
- Multimeter Brandson
- Multimeter GW Instek
- Multimeter Skandia
- Multimeter Elma
- Multimeter Uni-T
- Multimeter PeakTech
- Multimeter Sonel
- Multimeter Chauvin Arnoux
- Multimeter Megger
- Multimeter Gossen Metrawatt
- Multimeter Rigol
- Multimeter PCE Instruments
- Multimeter CEM
- Multimeter Joy-it
- Multimeter Klein Tools
- Multimeter Aim TTi
- Multimeter Wiha
- Multimeter Sanwa
- Multimeter EEVBlog
- Multimeter Kingcraft
- Multimeter Weidmüller
- Multimeter HT Instruments
- Multimeter Caltek
- Multimeter Elworks
- Multimeter Qian
- Multimeter Bearware
- Multimeter Noyafa
Nyaste Multimeter Manualer
23 Oktober 2024
21 Oktober 2024
18 Oktober 2024
18 Oktober 2024
17 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024