Maytag MMMS4230PZ Bruksanvisning

Maytag Inte kategoriserad MMMS4230PZ

Läs nedan 📖 manual på svenska för Maytag MMMS4230PZ (16 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/16

MICROWAVE HOOD COMBINATION

INSTALLATION INSTRUCTIONS

This product is suitable for use above electric or gas cooking products up to and including 36" (91.4 cm) wide. See the “Installation

Requirements” section for further notes.

These installation instructions cover different models. The appearance of your particular model may differ slightly from the illustration

in these installation instructions.

Table of Contents

MICROWAVE HOOD COMBINATION SAFETY

W11485889B

MICROWAVE HOOD COMBINATION SAFETY ............................1

INSTALLATION REQUIREMENTS .................................................2

Tools and Parts ............................................................................2

Remove Cardboard Template ......................................................2

Location Requirements ................................................................2

Product Dimensions .....................................................................3

Electrical Requirements ...............................................................3

INSTALLATION INSTRUCTIONS ...................................................4

Remove Mounting Plate ...............................................................4

Rotate Blower Motor ....................................................................4

Locate Wall Stud(s) ......................................................................7

Mark Rear Wall .............................................................................7

Drill Holes in Rear Wall .................................................................8

Attach Mounting Plate to Wall .....................................................8

Prepare Upper Cabinet ................................................................9

Install Damper Assembly

(for wall venting only) ..................................................................10

Install the Microwave Oven ........................................................10

Complete Installation .................................................................11

VENTING DESIGN SPECIFICATIONS ........................................12

ASSISTANCE ................................................................................14

Replacement Parts .....................................................................14

Accessories ................................................................................14

INSTALLATION REQUIREMENTS

Tools and Parts

Tools Needed

Gather the required tools and parts before starting installation.

Read and follow the instructions provided with any tools listed

here.

■Measuring tape

■Pencil

■Masking tape or

thumbtacks

■Scissors

■No. 2 Phillips screwdriver

■No. 3 Phillips screwdriver

for 1/4-20 x 3" (7.6 cm)

bolts

■Drill

■3/16" (5 mm), 3/8" (1 cm),

5/8" (1.6 cm) drill bits

■3/4" (1.9 cm) hole saw

■Diagonal wire cutting pliers

■Stud  nder

■7/16" (1.1 cm) socket

wrench (or box wrench) for

1/4" x 2" (6.4 mm x 5.1cm)

lag screws

■11/2" (3.8 cm) diameter hole

drill bit for wood or metal

cabinet

■Keyhole saw

■Caulking gun and

weatherproof caulking

compound

■Duct tape

Parts Needed

For information on reordering, see the “Replacement Parts”

section.

NOTE: The hardware items listed here are for wood studs.

For other types of wall structures, be sure to use appropriate

fasteners.

NOTE: Depending on model, aluminum grease  lter and

charcoal  lter may be combined.

Materials Needed

■Standard  ttings for wall or roof venting. See the “Venting

Design Speci cations” section.

Remove Cardboard Template

The cardboard piece from the top of the microwave oven

packaging is perforated. The piece inside the perforation is for

use as a rear wall template and upper cabinet template.

1. Cut along the perforation to separate the template from the

rest of the cardboard packaging.

2. Set the cardboard template to the side and refer to it during

the “Mark Rear Wall” and “Prepare Upper Cabinet” part of

installation.

Location Requirements

Check the opening where the microwave oven will be installed.

The location must provide:

■Minimum installation dimensions. See the “Installation

Dimensions” illustration.

■Minimum one 2" x 4" (5.1 x 10.2 cm) wood wall stud and

minimum 3/8" (1 cm) thickness drywall or plaster/lath within

cabinet opening.

■Support for weight of 150 lbs (68 kg) which includes

microwave oven and items placed inside the microwave

oven and upper cabinet.

■Grounded electrical outlet inside upper cabinet. See the

“Electrical Requirements” section.

NOTES:

■If installing the microwave oven near a left sidewall, make

sure there is at least 6" (15.2 cm) of clearance between the

wall and the microwave oven so that the door can open fully.

■Some models have a pocket handle. If installing the

microwave near a right side wall, make sure there is at least

3"(7.6 cm) of clearance between wall and microwave oven so

you can grab the handle integrated inside the door.

■Some cabinet and building materials are not designed to

withstand the heat produced by the microwave oven for

cooking. Check with your builder or cabinet supplier to make

sure that the materials used will not discolor, delaminate, or

sustain other damages.

Special Requirements

For Wall Venting Installation Only:

■Cutout must be free of any obstructions so that the vent  t

properly and the damper blade opens freely and fully.

For Roof Venting Installation Only:

■If you are using a rectangular-to-round transition piece, the

3" (7.6 cm) clearance needs to exist above the microwave

oven so that the damper blade can open freely and fully.

See “Rectangular to Round Transition” illustration in the

“Venting Design Speci cations” section.

A B C D E F G

A. 3/16-24 x 3" round-head

bolts (2)

B. 1/4-20 x 3"  at-head bolts (2)

C. Washers (2)

D. 3/16" toggle nuts (2)

E. 1/4" x 2" lag screws (2)

F. #6 x 3/8" Sheet metal screws (2)

G. Power supply cord bushing (1)

H. Damper assembly (for wall or

roof venting)

Not Shown:

■Mounting plate (attached to

back of microwave oven)

■Cardboard template (part of

packaging)

■Aluminum grease  lters

■Charcoal  lters (Depending

on model, charcoal  lters may

not be included. See “User

Instructions.”)

Installation Dimensions

NOTE: The grounded 3 prong outlet must be inside the upper

cabinet. See the “Electrical Requirements” section.

*30" (76.2 cm) is typical for 66" (167.6 cm) installation height.

Exact dimensions may vary depending on type of range/cooktop

below.

NOTE: To ensure good performance, do not obstruct top vent

air ow. If cabinets are deeper than 14" (35.6 cm) but no more

than 15" (38.1 cm), use the bump out mounting kit replacing the

I bar mounting plate from the wall. The bump out mounting kit

(part # W11185746) is not provided but can be purchased from

Whirlpool.

Product Dimensions

*Overall depth of product will vary slightly depending on door

design.

Electrical Requirements

Observe all governing codes and ordinances.

Required:

■A 120 V, 60 Hz, AC only, 15 or 20 A electrical supply with a

fuse or circuit breaker

Recommended:

■A time-delay fuse or time-delay circuit breaker

■A separate circuit serving only this microwave oven

A. 2" x 4" (5.1 x 10.2 cm) wall stud

B. Grounded 3 prong outlet

12" (30.5 cm) minimum

14" (35.6 cm) maximum

30"

(76.2 cm)

minimum

A B

upper cabinet and

side cabinet depth

30"

(76.2 cm)

typical*

66" (167.6 cm) minimum

I bar mounting plate Bump out mounting bracket

12" DEEPER 14" 14" DEEPER 15"

GROUNDING INSTRUCTIONS

SAVE THESE INSTRUCTIONS

For all cord connected appliances:

The microwave oven must be grounded. In the event of

an electrical short circuit, grounding reduces the risk of

electric shock by providing an escape wire for the electric

current. The microwave oven is equipped with a cord

having a grounding wire with a grounding plug. The plug

must be plugged into an outlet that is properly installed

and grounded.

WARNING: Improper use of the grounding plug can

result in a risk of electric shock. Consult a qualified

electrician or serviceman if the grounding instructions are

not completely understood, or if doubt exists as to whether

the microwave oven is properly grounded.

Do not use an extension cord. If the power supply cord is

too short, have a qualified electrician or serviceman install

an outlet near the microwave oven.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

WARNING

16¹⁄₄"

(41.3 cm)

17¹⁄₈ "

(43.5 cm)

+/-

3/16

(0.5 cm)

17"

Up to

(43.2 cm)*

cm)

29 ⁷⁄₈" (76.0

Produktspecifikationer

Varumärke:	Maytag
Kategori:	Inte kategoriserad
Modell:	MMMS4230PZ

Behöver du hjälp?

Om du behöver hjälp med Maytag MMMS4230PZ ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Inte kategoriserad Maytag Manualer

Maytag WHP0400VW Bruksanvisning

15 Oktober 2024

Maytag MMMS4230PZ Bruksanvisning

13 September 2024

Maytag MOES6030LZ Bruksanvisning

13 September 2024

Maytag MGDP586KW Bruksanvisning

13 September 2024

Maytag MTUC7500AF Bruksanvisning

13 September 2024

Maytag MALAUMVW7230HC Bruksanvisning

13 September 2024

Maytag MALAUMGD6630HW Bruksanvisning

13 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Philips 43PUL7672 Bruksanvisning

27 Oktober 2024

Manhattan 461504 Bruksanvisning

27 Oktober 2024

Sungrow SG125HV Bruksanvisning

27 Oktober 2024

Schneider CCT724319 Bruksanvisning

27 Oktober 2024

Technoline WS 250 Bruksanvisning

27 Oktober 2024

Livarno IAN 354423 Bruksanvisning

27 Oktober 2024

Kupper 12152 Bruksanvisning

27 Oktober 2024

JennAir CARBON24L Bruksanvisning

27 Oktober 2024

Medion Life E74001 (MD 81035) Bruksanvisning

27 Oktober 2024

POLARIS Sportsman Touring 850 SP (2015) Bruksanvisning

27 Oktober 2024