Metra TE-3BMC Bruksanvisning

Metra Dashcam TE-3BMC

Läs nedan 📖 manual på svenska för Metra TE-3BMC (8 sidor) i kategorin Dashcam. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/8
TE- User Manual3BMC
iBeam .com USA
M D letra ea er.com
techsupport@metra-autosound.com
TECH SUPPORT
l ::: J 800-253-8324
1. 10m extension cable
2. 4-pin to RCA adapter
3. DC power cable
4. Two male to male adapters
5. Gasket (not shown)
1
1. Brake light camera
1
2
3
4
2. Accessories
2
3. Connections
1. Remove factory 3rd brake light.
2. Connect red off new brake light to +12v and black to ground at factory wire
3rd brake light connector. This connection will power the brake light when
the brake is pressed.
3. Run cable though vehicle, up to . extension monitor Make to run cable in sure
the correct orientation (female end to monitor and male end to camera).
Avoid placing video cable where it can get pinched or damaged. Connect to
monitor's reverse AV input.
4. If using a RCA monitor, attach the adapter cable to monitor end of the
extension cable. Connect yellow video rca to the reverse camera input of the
radio or video display. Connect the DC power cable, with the red wire to a
switched +12v power source and black to ground (a metal, non-painted
surface).
5. Connect brake light camera to the extension cable, and after verifying
functionality mount the brake light to the vehicle using the factory hardware.
4.Maintenance
Although this Rear View Camera requires little care, you can still maintain its
condition and performance by occasionally clean the camera lens with damp soft
cloth.

Produktspecifikationer

Varumärke: Metra
Kategori: Dashcam
Modell: TE-3BMC

Behöver du hjälp?

Om du behöver hjälp med Metra TE-3BMC ställ en fråga nedan och andra användare kommer att svara dig




Dashcam Metra Manualer

Dashcam Manualer

Nyaste Dashcam Manualer