Milwaukee 48-59-1806 Bruksanvisning

Milwaukee Batteriladdare 48-59-1806

Läs nedan 📖 manual på svenska för Milwaukee 48-59-1806 (16 sidor) i kategorin Batteriladdare. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/16

SIX-PACK

CHARGER

Milwaukee Electric T ool Corp.

Brookeld, WI 53005 USA

Cat. No. / No de cat.

48-59-1806

M18™ SIX-PACK CHARGER

M18™ LITHIUM-ION BATTERY PACKS

CHARGEUR À SIX BLOCS DE BATTERIES M18™

BLOCS DE BATTERIES LITHIUM-ION M18™

CARGADOR M18™ PARA SEIS BATERÍAS

BATERÍAS DE IONES DE LITIO M18™

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

WARNING To reduce the risk of injury, user must read and understand operator's manual.

AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien

comprendre le manuel.

ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

New batteries must

be charged before

rst use.

L e s b a t t e r i e s

neuves doivent être

chargées avant leur

utilisation initiale.

Las baterías nuevas

se d eb en cargar

antes de usarlas por

primera vez.

1. SAVE THESE INSTRUCTIONS - THIS OP-

ERATOR’S MANUAL CONTAINS IMPORTANT

SAFETY AND OPERATING INSTRUCTIONS

FOR MILWAUKEE LI-ION BATTERY PACKS

AND THE MILWAUKEE LI-ION CHARGER.

2. BEFORE USING THE BATTERY PACK AND

CHARGER, READ THIS OPERATOR’S MAN-

UAL, YOUR TOOL OPERATOR’S MANUAL,

AND ALL LABELS ON THE BATTERY PACK,

CHARGER AND TOOL.

CAUTION

TO REDUCE THE RISK OF IN-

JURY, CHARGE MILWAUKEE

M18™ LI-ION RECHARGEABLE PACKS ONLY

IN THEIR MILWAUKEE M18™ - LI-ION CHAR

GER. Other types of chargers may cause per-

sonal injury or damage. Battery pack and charger

are not compatible with ™-technology or NiCd V

systems. Do not wire a battery pack to a power

supply plug or car cigarette lighter. Battery packs

will be permanently disabled or damaged.

4. USE MILWAUKEE LI-ION PACKS ONLY ON

COMPATIBLE MILWAUKEE LI-ION TOOLS.

Battery pack and charger are not compatible with

V™-technology or NiCd systems. Use with other

tools may result in a risk of re, electric shock or

personal injury.

5. AVOID DANGEROUS ENVIRONMENTS. Do not

charge battery pack in rain, snow, damp or wet

locations. Do not use battery pack or charger in

the presence of explosive atmospheres (gaseous

fumes, dust or ammable materials) because

sparks may be generated when inserting or remov-

ing battery pack, possibly causing re.

6. CHARGE IN A WELL VENTILATED AREA.

Do not block charger vents. Keep them clear to

allow proper ventilation. Do not allow smoking or

open ames near a charging battery pack. Vented

gases may explode.

7. MAINTAIN CHARGER CORD. When unplug-

ging charger, pull plug rather than cord to

reduce the risk of damage to the electrical

plug and cord. Never carry charger by its cord.

Keep cord from heat, oil and sharp edges.

Make sure cord will not be stepped on, tripped

over or subjected to damage or stress. Do not

use charger with damaged cord or plug. Have

a damaged charger replaced immediately.

8. DO NOT USE AN EXTENSION CORD UNLESS

IT IS ABSOLUTELY NECESSARY. Using the

wrong, damaged or improperly wired extension

cord could result in the risk of re and electrical

shock. If an extension cord must be used, plug the

charger into a properly wired 16 gauge or larger

extension cord with pins that are the same number,

size and shape as the pins on the charger. Make

sure that the extension cord is in good electrical

condition.

9. CHARGER IS RATED FOR 120 VOLT AC ONLY.

Charger must be plugged into an appropriate

receptacle.

10. USE ONLY RECOMMENDED ATTACHMENTS.

Use of an attachment not recommended or sold

by the battery charger or battery pack manufac-

turer may result in a risk of re, electric shock or

personal injury.

11. UNPLUG CHARGER when not in use. Remove

battery packs from unplugged chargers.

12. TO REDUCE THE RISK OF ELECTRIC SHOCK,

always unplug charger before cleaning or mainte-

nance. Do not allow water to ow into AC/DC plug.

Use a Ground Fault Circuit Interrupter (GFCI) to

reduce shock hazards.

13. DO NOT BURN OR INCINERATE BATTERY

PACKS. Battery packs may explode, causing per-

sonal injury or damage. Toxic fumes and materials

are created when battery packs are burned.

14. DO NOT CRUSH, DROP, OR DAMAGE battery

pack. Do not use a battery pack or charger that

has received a sharp blow, been dropped, run

over, or damaged in any way (e.g., pierced with

a nail, hit with a hammer, stepped on).

15. DO NOT DISASSEMBLE. Incorrect reassembly

may result in the risk of electric shock, re or

exposure to battery chemicals. If it is damaged,

take it to a MILWAUKEE service facility.

16. BATTERY CHEMICALS CAUSE SERIOUS

BURNS. Never allow contact with skin, eyes, or

mouth. If a damaged battery pack leaks battery

chemicals, use rubber or neoprene gloves to

dispose of it. If skin is exposed to battery uids,

wash with soap and water and rinse with vin-

egar. If eyes are exposed to battery chemicals,

immediately ush with water for 20 minutes and

seek medical attention. Remove and dispose of

contaminated clothing.

17. DO NOT SHORT CIRCUIT. A short-circuited

battery pack may cause re, personal injury, and

product damage. A battery pack will short circuit

if a metal object makes a connection between

the positive and negative contacts on the battery

pack. Do not place a battery pack near anything

that may cause a short circuit, such as coins, keys

or nails in your pocket.

18. DO NOT ALLOW FLUIDS TO FLOW INTO BAT-

TERY PACK. Corrosive or conductive uids, such

as seawater, certain industrial chemicals, and

bleach or bleach containing products, etc., can

cause a short circuit..

19. STORE YOUR BATTERY PACK AND CHAR-

GER in a cool, dry place. Do not store battery

pack where temperatures may exceed 120°F

(50°C) such as in direct sunlight, a vehicle or

metal building during the summer.

20.

ALWAYS USE A SIDE HANDLE when using a

HIGH OUTPUT or HIGH DEMAND battery pack

6.0 Ah or above

; the output torque of some tools

may increase. If your drill/driver did not come with

a side handle, visit www. milwaukeetool.com for

the appropriate accessory handle.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all

instructions listed below, may result in electric shock, re and/or serious personal injury.

SAVE THESE INSTRUCTIONS

FUNCTIONAL

DESCRIPTION

SIX-PACK

CHARGE R

Mil waukee Electri c Tool Cor p.

Brookeld , WI 53005 USA

1. Contacts

2. Release buttons

3. Fuel Gauge button

4. Fuel Gauge

5. Electrical contacts

6. Bays

7. Vents

8. Cord

9. Skip button

10. Light indicators:

Continuous red: Charging

Continuous green light: Charging is complete

Fast ashing red: Battery is too hot/cold -

Charging will begin when battery

reaches correct charging

temperature

Slow ashing red: Battery charge is pending -

Charging will begin when the rst

pack is fully charged

Flashing red/green: Damaged or faulty battery pack

SYMBOLOGY

Volts

Direct Current

Alternating Current

Double Insulated

Properly Recycle Batteries

Hertz

Amps

UL Listing for Canada and U.S.

SPECIFICATIONS

Cat. No. 48-59-1806 ...............................................

Input Volts 120 AC ....................................................

Input Amps 2.1 AC....................................................

Output Volts .................................................. 18 DC

Output Amps ................................................ 3.5 DC

Recommended Ambient

Charging Temperature ................... 40°F to 105°F

M18™ Li-Ion Battery Packs ........................ 18 V DC

MILWAUKEE M18™

LI-ION BATTERY

PACKS

Fuel Gauge

Use the Fuel Gauge to deter

Less than 10% if bottom light

is ashing

Approximate Run

Time Remaining

78-100 %

55-77 %

33-54 %

10-32 %

mine the battery pack's re-

maining run time. Press the

Fuel Gauge button to dis-

play the lights. The Fuel

Gauge will light up for 2-3

seconds. When less than

10% of charge is left, 1 light

on the fuel gauge will ash

slowly.

NOTE: If the Fuel Gauge doesn't appear to be

working, place the battery pack on the charger and

charge as needed.

Compared to NiCd battery pack types, MILWAUKEE

Li-Ion battery packs deliver fade-free power for their

entire run time. The tool will not experience a slow,

gradual loss of power as you work. To signal the

end of discharge, 1 light on the fuel gauge will ash

quickly for 2-3 seconds and the tool will not run.

Charge the battery pack.

NOTE: Immediately after using the battery pack,

the Fuel Gauge may display a lower charge than it

will if checked a few minutes later. The battery cells

"recover" some of their charge after resting.

Battery Pack Protection

To protect itself from damage and extend its life, the

battery pack’s intelligent circuit monitors current draw

and temperature. In extremely high torque, binding,

stalling, and short circuit situations, the battery pack

will turn OFF the tool if the current draw becomes

too high. All the fuel gauge lights will ash. Release

the trigger and restart.

Under extreme circumstances, the internal tem-

perature of the battery could become too high. If

this happens, the fuel gauge lights will ash in an

alternating pattern and the tool will not run. Allow the

battery to cool down.

Fuel Gauge Lights Diagnosis Solution

Lights 1 - 4 Solid Remaining run time Continue working

1 Light, ashing

slowly

Less than 10% run

time left Prepare to charge pack

1 Light, ashing

quickly End of discharge Charge pack

Lights 1-4, ashing

quickly

Current draw too

high

Release trigger and

restart, reduce pressure

Lights 1&3 / 2&4,

ashing alternatingly

Battery temperature

too high

Release trigger and allow

battery to cool

Produktspecifikationer

Varumärke:	Milwaukee
Kategori:	Batteriladdare
Modell:	48-59-1806
Färg på produkten:	Bruin
Höjd:	0.75 mm
Diameter:	0.08 mm
Certifiering:	C22.2 No. 65-13
Material:	Cooper, Tinplate
Hållbarhetscertifikat:	RoHS
Striplengte:	23.8 mm