Mitsubishi Jet Towel Smart JT-S2AP Bruksanvisning
Mitsubishi
Handendroger
Jet Towel Smart JT-S2AP
Läs nedan 📖 manual på svenska för Mitsubishi Jet Towel Smart JT-S2AP (20 sidor) i kategorin Handendroger. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/20
− −1
Read the manual thoroughly before beginning installation to ensure the unit is installed safely and correctly.
Local installation standards should be obeyed and installation should be performed by the dealer or a qualifi ed professional.
The "INSTRUCTION MANUAL" is for the customer. Be sure to hand it to the customer.
INSTALLATION MANUAL For Dealers and Installers
Location of Model Name display
Location of power supply
voltage display
Single-phase 220 – 240V AC
INDEX
Safety Precautions …………………………………… 2
■ Checking the installation environment ………… 3
Parts to be installed …………………………………… 4
■ ………………………………………… Main unit 4
■ ……………………………………… Accessories 5
■ Required items …………………………………… 5
Use environment ……………………………………… 6
■ Required space for installation ………………… 6
■ Suitable walls …………………………………… 6
■ ……………………………… Installation position 6
Installation procedure ………………………………… 7
■ …………………… Fixing the installation panel 8
■ Fixing the base …………………………………… 8
■ Removing the terminal cover …………………… 9
■ Wiring ……………………………………………… 9
■ …………………………… Checking the setting 11
■ Attaching the front cover ………………………… 12
Checking after installation …………………………… 13
■ Removing the front cover after installation …… 13
Test Run ………………………………………………… 14
Instructions given to customer ……………………… 14
Hand dryer
1511876HB7401
GB
Unit colour -W (White) -S (Silver)
MODEL
JT-S2AP-W-NE
JT-S2AP-S-NE Heater Model
JT-S2A-W-NE Heater-less Model
− −2
Prohibited
Do not
disassemble
Prohibited
●
Do not install when the unit (power
cable) is electrifi ed.
Doing so may result in electric shocks.
Important !
Follow
instructions
Safety Precautions
●
The dangers arising from improper handling and the extents of the dangers are classifi ed and explained as shown
below.
Caution The following may lead to minor injuries or damage
to property if the unit is handled incorrectly.
Warning The following may lead to death or serious
personal injury if handled incorrectly.
●
Do not install in locations where they
may be leakages of combustible gas.
This may cause fi res.
●
Do not install in locations where salt
damage may occur or where corrosive,
neutral or reductive gases are present.
This may cause malfunctions.
●
Do not scratch, damage, process,
excessively bend, pull, twist or bundle
the power cable.
Please also refrain from placing heavy
objects onto it or trapping it.
Failure to do so may damage the power
cable, causing fi res or electric shocks.
●
Do not attempt any disassembly or
modifi cation of the unit that is not
expressly stated in this manual.
Doing so may result in fi res, electric
shocks or injuries.
●
Do not use in a hot location such as a
shower room, where condensation may
form on the unit or where water may
splash directly onto the unit.
This may cause electric shocks or
malfunctions.
●
Wiring work is to be done by a certifi ed
electrical worker in accordance with
technical standards for electrical
equipment and int e rna l wiring
regulations.
Incorrect wiring work may cause electric
shocks or fi res.
●
Use single-phase 220 – 240V AC power.
Using the incor rect power supply may cause
fi res, electric shocks or malfunctions.
●
Use exclusive wiring for the power
source.
Using this unit with other devices on a
branch socket may cause abnormal heat,
which may cause fi res.
●
Be sure to install a ground-fault circuit
interrupter.
Failure to do so may result in electric shocks.
●
The unit shall be installed in accordance
with national wiring regulations.
●
A means for disconnection must be
incorporated in the fi xed wiring in
accordance with wiring rules.
Do not use
in the baths/
shower room
Important !
Follow
instructions
●
Install securely in a location strong
enough to support the weight of the
unit.
Injuries may be caused if the unit falls off
the wall.
●
Wear gloves when installing the unit.
Not doing so may result in injuries.
− −3
Single-phase 220 – 240V AC power is used.
Using the incorrect power supply may cause fi res, electric shocks or malfunctions.
Safety Precautions (continued)
Warning
■Checking the installation environment
Do not install the unit in the following types of locations.
(This may cause malfunctions.)
●Outdoors ●Locations where the temperature could be lower than 0 C.
●Locations where there is a lot of dust.
●Locations where the temperature could be higher than 40 C.
●Locations where there is a lot of condensation.
●Locations where salt damage may occur.
●Locations where the unit is in direct or strong sunlight (may cause the sensor to malfunction).
●In vehicles (including ships and airplanes)
●Locations where corrosive, neutral or reductive gasses are present.
(This may shorten the working life of the unit and/or cause malfunctions.)
●Near food or tableware ●Locations where the unit may come into direct contact with water.
●Kitchens
(Where there is a risk of water splashing.)
●Rooms that have a sterilisation basin, swimming pools and baths.
Produktspecifikationer
| Varumärke: | Mitsubishi |
| Kategori: | Handendroger |
| Modell: | Jet Towel Smart JT-S2AP |
Behöver du hjälp?
Om du behöver hjälp med Mitsubishi Jet Towel Smart JT-S2AP ställ en fråga nedan och andra användare kommer att svara dig
Handendroger Mitsubishi Manualer
15 Augusti 2024
Handendroger Manualer
Nyaste Handendroger Manualer
15 Oktober 2024
21 September 2024
4 September 2024
24 Augusti 2024
22 Augusti 2024