Mitsubishi P93DW Bruksanvisning

Mitsubishi Skrivare P93DW

Läs nedan 📖 manual på svenska för Mitsubishi P93DW (31 sidor) i kategorin Skrivare. Denna guide var användbar för 16 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/31
This digital monochrome printer complies with the requirements of the EC Directive 89/
336/EEC, 73/23/EEC, 93/42/EEC and 93/68/EEC.
The electro-magnetic susceptibility has been chosen at a level that gains proper
operation in residential areas, on business and light industrial premises and on small-
scale enterprises, inside as well as outside of the buildings. All places of operation are
characterised by their connection to the public low voltage power supply system.
DIGITAL MONOCHROME PRINTER
MODEL
P93DW
P93DE
OPERATION MANUAL
THIS OPERATION MANUAL IS IMPORTANT
TO YOU.
PLEASE READ IT BEFORE USING YOUR
DIGITAL MONOCHROME PRINTER.
DIGITAL MONOCHROME
PRINTER
OPEN
COPY
FEEDLOCKUPDOWN
BRT/CONT
BRT
CONT
LOCK
FOR THE MODEL P91DW(UB) ONLY
WARNING:
In the USA or Canada, use the AC power cord according to the recommendations as
below, in order to comply with UL2601-1 and CAN/CSA C22.2 No. 601.1.
Case 1. Connect to the 120V receptacle of the room or the host equipment.
The AC power cord should be UL or CSA approved and consist of type SJT, size
16 or 18AWG, length 2.5m or shorter cord with IEC320/C13 type, 125V 10A or
higher rating connector and NEMA 5-15 type, 125V 10A or higher rating, Hospital
Grade plug.
Case 2. Connect to the 230V receptacle of the room or the host equipment.
The AC power cord should be UL or CSA approved and consist of type SJT, size
16 or 18AWG, length 2.5m or shorter cord with IEC320/C13 type, 250V 10A or
higher rating connector and NEMA 6-15 type, 250V 10A or higher rating, Hospital
Grade plug.
Case 3. Connect to the 120V receptacle of the host equipment.
The AC power cord should be UL or CSA approved and consist of type SJT, size
16 or 18AWG, length 2.5m or shorter cord with IEC320/C13 type, 125V 10A or
higher rating connector and IEC320-2.2/E type, 125V 10A or higher rating plug.
Case 4. Connect to the 230V receptacle of the host equipment.
The AC power cord should be UL or CSA approved and consist of type SJT, size
16 or 18AWG, length 2.5m or shorter cord with IEC320/C13 type, 250V 10A or
higher rating connector and IEC320-2.2/E type, 250V 10A or higher rating plug.
CAUTION:
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communica-
tions.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interfer-
ence at his or her own expense.
Information:
This class A digital apparatus complies with Canadian ICES-003.
"CLASSIFIED BY UNDERWRITERS LABORATORIES INC.®
WITH RESPECT TO ELECTRIC SHOCK, FIRE AND MECHANICAL HAZARDS ONLY IN
ACCORDANCE WITH UL2601-1 AND CAN/CSA C22.2 No. 601.1"
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to constitute a
risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
The “Caution, hot surface” symbol indicates that the marked item may be hot
and should not be touched.
The “ON/OFF” symbol indicates connection to or disconnection from the mains,
at least for mains switches.
The “Equipotentiality” symbol identifies the terminals connected each other. The
potential of various parts of equipment or of a system is equalized.
The “Alternating current” symbol indicates that the equipment is suitable for
alternating current only.
RISK OF ELECTRIC SHOCK DO NOT OPEN.
TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT REMOVE COVER (OR
BACK)
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION:
When you dispose of the unit or accessories, you must obey the law in the relative area
or country and/or regulation in the relative hospital.

Produktspecifikationer

Varumärke: Mitsubishi
Kategori: Skrivare
Modell: P93DW

Behöver du hjälp?

Om du behöver hjälp med Mitsubishi P93DW ställ en fråga nedan och andra användare kommer att svara dig


Skrivare Mitsubishi Manualer

Mitsubishi

Mitsubishi P93DW Bruksanvisning

7 Oktober 2024
Mitsubishi

Mitsubishi CPK60 Bruksanvisning

13 September 2024
Mitsubishi

Mitsubishi CP9550DW-S Bruksanvisning

10 September 2024
Mitsubishi

Mitsubishi CP-D70DW Bruksanvisning

20 Augusti 2024
Mitsubishi

Mitsubishi CP9800DW Bruksanvisning

5 Augusti 2024
Mitsubishi

Mitsubishi CP8000DW Bruksanvisning

28 Juli 2024

Skrivare Manualer

Nyaste Skrivare Manualer

Xerox

Xerox Phaser 3010 Bruksanvisning

16 Januari 2025
Xerox

Xerox Phaser 1235 Bruksanvisning

16 Januari 2025
HP

HP Color LaserJet Pro M256 serie Bruksanvisning

15 Januari 2025
HP

HP Color LaserJet Pro M452 Bruksanvisning

15 Januari 2025
HP

HP D2460 Bruksanvisning

15 Januari 2025
HP

HP Deskjet 6940 series Bruksanvisning

15 Januari 2025
HP

HP Deskjet 460 Bruksanvisning

15 Januari 2025
HP

HP Deskjet 3840 series Bruksanvisning

15 Januari 2025
HP

HP DeskJet 2600 All-in-One series Bruksanvisning

15 Januari 2025
HP

HP DeskJet 3762 Bruksanvisning

15 Januari 2025