Motu 16A AVB Bruksanvisning

Motu hi-fi system 16A AVB

Läs nedan 📖 manual på svenska för Motu 16A AVB (106 sidor) i kategorin hi-fi system. Denna guide var användbar för 11 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/106
1248
User Guide
1280 Massachusetts Avenue
Cambridge, MA 02138
Business voice: (617) 576-2760
Business fax: (617) 576-3609
Web site: www.motu.com
Tech support: www.motu.com/support
8M
16A
MOTU AVB Switch
SAFETY PRECAUTIONS AND ELECTRICAL REQUIREMENTS FOR THE 1248, 8M, 16A, and MOTU AVB SWITCH (“PRODUCT)
CAUTION! READ THIS SAFETY GUIDE BEFORE YOU BEGIN INSTALLATION OR OPERATION. FAILURE TO COMPLY WITH SAFETY INSTRUCTIONS
COULD RESULT IN BODILY INJURY OR EQUIPMENT DAMAGE.
HAZARDOUS VOLAGES: CONTACT MAY CAUSE ELECTRIC SHOCK OR BURN. TURN OFF UNIT BEFORE SERVICING.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR OTHER MOISTURE.
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
WARNING: DO NOT PERMIT FINGERS TO TOUCH THE TERMINALS OF PLUGS WHEN INSTALLING OR REMOVING THE PLUG TO OR FROM THE OUTLET.
WARNING: IF NOT PROPERLY GROUNDED THE MOTU PRODUCT COULD CAUSE AN ELECTRICAL SHOCK.
The MOTU product is equipped with a three-conductor cord and grounding type plug which has a grounding prong, approved by Underwriters' Laboratories and the Canadian Standards Association.
This plug requires a mating three-conductor grounded type outlet as shown in Figure A below. If the outlet you are planning to use for the MOTU product is of the two prong type, DO NOT REMOVE
OR ALTER THE GROUNDING PRONG IN ANY MANNER. Use an adapter as shown below and always connect the grounding lug to a known ground. It is recommended that you have a qualied
electrician replace the TWO prong outlet with a properly grounded THREE prong outlet. An adapter as illustrated below in Figure B is available for connecting plugs to two-prong receptacles.
WARNING: THE GREEN GROUNDING LUG EXTENDING FROM THE ADAPTER MUST BE CONNECTED TO A PERMANENT GROUND SUCH AS TO A
PROPERLY GROUNDED OUTLET BOX. NOT ALL OUTLET BOXES ARE PROPERLY GROUNDED.
If you are not sure that your outlet box is properly grounded, have it checked by a qualied electrician. NOTE: The adapter illustrated is for use only if you already have a properly grounded two-prong
receptacle. Adapter is not allowed in Canada by the Canadian Electrical Code. Use only three wire extension cords which have three-prong grounding type plugs and three-prong receptacles which
will accept the MOTU product plug.
IMPORTANT SAFEGUARDS
1. Read these instructions. All the safety and operating instructions should be read before operating the product.
2. Keep these instructions. These safety instructions and the product owners manual should be retained for future reference.
3. Heed all warnings. All warnings on the product and in the owners manual should be adhered to.
4. Follow all Instructions. All operating and use instructions should be followed.
5. Do not use the product near water.
6. Cleaning - Unplug the product from the computer and clean only with a dry cloth. Do not use liquid or aerosol cleaners.
7. Ventilation - Do not block any ventilation openings. Install in accordance with the manufacturers instructions.
8. Heat - Do not install the product near any heat sources such as radiators, heat registers, stoves, or another apparatus (including an amplier) that produces heat.
9. Overloading - Do not overload wall outlets and extension cords as this can result in a risk of re or electrical shock.
10. Grounding - Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the provided plug does not t into your outlet, consult and electrician for replacement of the obsolete outlet.
11. Power cord - Protect the product power cord from being walked on or pinched by items placed upon or against them. Pay particular attention to cords and plugs, convenience receptacles, and the point where they exit from the unit.
12. Power switch - Install the product so that the power switch can be accessed and operated at all times.
13. Disconnect - The main plug is considered to be the disconnect device for the product and shall remain readily operable.
14. Accessories - Only use attachments/accessories specied by the manufacturer.
15. Placement - Use only with the cart, stand, tripod, bracket or table specied by the manufacturer, or sold with the product. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
16. Surge protection - Unplug the product during lightning storms or when unused for long periods of time.
17. Servicing - Refer all servicing to qualied service personnel. Servicing is required when the product has been damaged in any way, such as when a power-supply cord or plug is damaged, liquid has been spilled or objects have fallen
into the product, the product has been exposed to rain or moisture, does not operate normally, or has been dropped.
18. Power Sources - Refer to the manufacturers operating instructions for power requirements. Be advised that different operating voltages may require the use of a different line cord and/or attachment plug.
19. Installation - Do not install the product in an unventilated rack, or directly above heat-producing equipment such as power ampliers. Observe the maximum ambient operating temperature listed below.
20. Power ampliers- Never attach audio power amplier outputs directly to any of the units connectors.
21. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions
may result in re, electric shock or other hazards.
22. Safety Check - Upon completion of any service or repairs to this MOTU product, ask the service technician to perform safety checks to determine that the product is in safe operating conditions.
ENVIRONMENT, HEAT AND VENTILATION
Operating Temperature: 10°C to 40°C (50°F to 104°). The product should be situated away from heat sources or other equipment that produces heat. When installing the product in a rack or any other location, be sure there is adequate
space around the product to ensure proper ventilation. Improper ventilation will cause overheating and can damage the unit.
TO REDUCE THE RISK OF ELECTRICAL SHOCK OR FIRE
Do not handle the power cord with wet hands. Do not pull on the power cord when disconnecting it from an AC wall outlet. Grasp it by the plug.
Do not expose this apparatus to rain or moisture. Do not place objects containing liquids on it.
AC INPUT
100 - 240VAC ~ 50 / 60Hz 0.5A max
3-prong plug
Grounding prong
Properly grounded 3-prong outlet
Grounding lug
Screw
3-prong plug
Adapter
Make sure this is connected to
a known ground.
Two-prong receptacle
Figure A Figure B
III
Contents
Part 1: Getting Started
7Quick Start Guide
91248 Front Panel
10 1248 Rear Panel
11 8M Front Panel
12 8M Rear Panel
13 16A Front Panel
14 16A Rear Panel
15 MOTU AVB Switch
17 MOTU AVB Control Web App
27 About Your MOTU AVB Audio Interface
31 Packing List and System Requirements
33 Software Installation
37 Hardware Installation
Part 2: Using your MOTU interface
57 Presets
61 The Front Panel LCD
65 Working with Host Audio Software
73 Mixer Effects
79 Networking
Part 3: Appendices
87 Troubleshooting
89 Audio Specifications
95 Mixer Schematics
99 Updating Firmware
101 OSC Support
103 Index

Produktspecifikationer

Varumärke: Motu
Kategori: hi-fi system
Modell: 16A AVB
Färg på produkten: Zwart
Vikt: 4700 g
Bredd: 190 mm
Djup: 490 mm
Höjd: 424 mm
Snäll: PC
Vormfaktor: Midi Tower
Antal USB 2.0-portar: 2
Inbyggda högtalare: Nee
Nätförsörjning: 550 W
Ljudingångar: Ja
Ljudutgång: Ja
Material: Plastic, Steel
Strömförsörjning ingår: Ja
Antal IEEE 1394/Firewire-portar: 1
Antal 5,25" fack: 3
Antal 3,5" fack: 2
Hårddiskstorlekar som stöds: 3.5 "
Antal expansionsplatser: 7
Moderkortsformfaktorer som stöds: ATX, Micro ATX
Maximal CPU-kylarhöjd: 163 mm
Maximal grafikkortslängd: 315 mm
Maximalt antal främre fläktar: 1
Främre fläktar som stödjer diametrar: 120,140 mm
Maximalt antal fläktar överst: 1
Toppfläktar som stöder diametrar: 120 mm
Max antal bakre fläktar: 1
Bakre fläktar stödjer diametrar: 80, 90, 120 mm
Antal främre fläktar installerade: 1x 120 mm
Maximalt antal sidofläktar: 1
Sidofläktar som stödjer diametrar: 120 mm
Maximalt antal bottenfläktar: 1
Bottenfläktar som stöder diametrar: 80, 90, 120 mm
ATX-strömkontakt (20+4-stift): Ja
Antal interna 3,5" fack: 5

Behöver du hjälp?

Om du behöver hjälp med Motu 16A AVB ställ en fråga nedan och andra användare kommer att svara dig




hi-fi system Motu Manualer

Motu

Motu 16A AVB Bruksanvisning

9 September 2024
Motu

Motu 16A Bruksanvisning

20 Augusti 2024
Motu

Motu 112D Bruksanvisning

20 Augusti 2024
Motu

Motu LP32 Bruksanvisning

20 Augusti 2024
Motu

Motu 8M Bruksanvisning

20 Augusti 2024
Motu

Motu 24Ai Bruksanvisning

20 Augusti 2024
Motu

Motu Track16 Bruksanvisning

20 Augusti 2024
Motu

Motu M2 Bruksanvisning

20 Augusti 2024

hi-fi system Manualer

Nyaste hi-fi system Manualer