Motu 828mk3 Hybrid Bruksanvisning

Motu hi-fi system 828mk3 Hybrid

Läs nedan 📖 manual på svenska för Motu 828mk3 Hybrid (128 sidor) i kategorin hi-fi system. Denna guide var användbar för 11 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/128
MOTU 828mk3 Hybrid
User Guide for Mac
1280 Massachusetts Avenue
Cambridge, MA 02138
Business voice: (617) 576-2760
Business fax: (617) 576-3609
Web site: www.motu.com
Tech support: www.motu.com/support
SAFETY PRECAUTIONS AND ELECTRICAL REQUIREMENTS
CAUTION! READ THIS SAFETY GUIDE BEFORE YOU BEGIN INSTALLATION OR OPERATION. FAILURE TO COMPLY WITH SAFETY INSTRUCTIONS
COULD RESULT IN BODILY INJURY OR EQUIPMENT DAMAGE.
HAZARDOUS VOLAGES: CONTACT MAY CAUSE ELECTRIC SHOCK OR BURN. TURN OFF UNIT BEFORE SERVICING.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR OTHER MOISTURE.
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
WARNING: DO NOT PERMIT FINGERS TO TOUCH THE TERMINALS OF PLUGS WHEN INSTALLING OR REMOVING THE PLUG TO OR FROM THE OUTLET.
WARNING: IF NOT PROPERLY GROUNDED THE MOTU 828mk3 COULD CAUSE AN ELECTRICAL SHOCK.
The MOTU 828mk3 is equipped with a three-conductor cord and grounding type plug which has a grounding prong, approved by Underwriters' Laboratories and the Canadian Standards Association.
This plug requires a mating three-conductor grounded type outlet as shown in Figure A below. If the outlet you are planning to use for the MOTU 828mk3 is of the two prong type, DO NOT REMOVE
OR ALTER THE GROUNDING PRONG IN ANY MANNER. Use an adapter as shown below and always connect the grounding lug to a known ground. It is recommended that you have a qualified
electrician replace the TWO prong outlet with a properly grounded THREE prong outlet. An adapter as illustrated below in Figure B is available for connecting plugs to two-prong receptacles.
WARNING: THE GREEN GROUNDING LUG EXTENDING FROM THE ADAPTER MUST BE CONNECTED TO A PERMANENT GROUND SUCH AS TO A
PROPERLY GROUNDED OUTLET BOX. NOT ALL OUTLET BOXES ARE PROPERLY GROUNDED.
If you are not sure that your outlet box is properly grounded, have it checked by a qualified electrician. NOTE: The adapter illustrated is for use only if you already have a properly grounded two-prong
receptacle. Adapter is not allowed in Canada by the Canadian Electrical Code. Use only three wire extension cords which have three-prong grounding type plugs and three-prong receptacles which
will accept the MOTU 828mk3 plug.
IMPORTANT SAFEGUARDS
1. Read these instructions. All the safety and operating instructions should be read before operating the 828mk3.
2. Keep these instructions. These safety instructions and the 828mk3 owners manual should be retained for future reference.
3. Heed all warnings. All warnings on the 828mk3 and in the owners manual should be adhered to.
4. Follow all Instructions. All operating and use instructions should be followed.
5. Do not use the 828mk3 near water.
6. Cleaning - Unplug the 828mk3 from the computer and clean only with a dry cloth. Do not use liquid or aerosol cleaners.
7. Ventilation - Do not block any ventilation openings. Install in accordance with the manufacturers instructions.
8. Heat - Do not install the 828mk3 near any heat sources such as radiators, heat registers, stoves, or another apparatus (including an amplier) that produces heat.
9. Overloading - Do not overload wall outlets and extension cords as this can result in a risk of re or electrical shock.
10. Grounding - Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the provided plug does not t into your outlet, consult and electrician for replacement of the obsolete outlet.
11. Power cord - Protect the 828mk3 power cord from being walked on or pinched by items placed upon or against them. Pay particular attention to cords and plugs, convenience receptacles, and the point where they exit from the unit.
12. Power switch - Install the 828mk3 so that the power switch can be accessed and operated at all times.
13. Disconnect - The main plug is considered to be the disconnect device for the 828mk3 and shall remain readily operable.
14. Accessories - Only use attachments/accessories specified by the manufacturer.
15. Placement - Use only with the cart, stand, tripod, bracket or table specied by the manufacturer, or sold with the 828mk3. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
16. Surge protection - Unplug the 828mk3 during lightning storms or when unused for long periods of time.
17. Servicing - Refer all servicing to qualied service personnel. Servicing is required when the 828mk3 has been damaged in any way, such as when a power-supply cord or plug is damaged, liquid has been spilled or objects have fallen
into the 828mk3, the 828mk3 has been exposed to rain or moisture, does not operate normally, or has been dropped.
18. Power Sources - Refer to the manufacturers operating instructions for power requirements. Be advised that different operating voltages may require the use of a different line cord and/or attachment plug.
19. Installation - Do not install the 828mk3 in an unventilated rack, or directly above heat-producing equipment such as power amplifiers. Observe the maximum ambient operating temperature listed below.
20. Power ampliers- Never attach audio power amplier outputs directly to any of the units connectors.
21. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specied by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions
may result in fire, electric shock or other hazards.
22. Safety Check - Upon completion of any service or repairs to this MOTU 828mk3, ask the service technician to perform safety checks to determine that the product is in safe operating conditions.
ENVIRONMENT
Operating Temperature: 10°C to 40°C (50°F to 104°)
TO REDUCE THE RISK OF ELECTRICAL SHOCK OR FIRE
Do not handle the power cord with wet hands. Do not pull on the power cord when disconnecting it from an AC wall outlet. Grasp it by the plug. Do not expose this apparatus to rain or moisture. Do not place objects containing liquids on it.
AC INPUT
100 - 240VAC ~ 50 / 60Hz 20 Watts.
3-prong plug
Grounding prong
Properly grounded 3-prong outlet
Grounding lug
Screw
3-prong plug
Adapter
Make sure this is connected to
a known ground.
Two-prong receptacle
Figure A Figure B
III
Contents
5Quick Reference: 828mk3 Front Panel
6Quick Reference: 828mk3 Rear Panel
7Quick Reference: MOTU Audio Setup
9About the 828mk3
15 Packing List and System Requirements
17 Installing the 828mk3 Hardware
33 Installing the 828mk3 Software
37 MOTU Audio Setup
43 Front Panel Operation
53 Digital Performer and AudioDesk
59 Other Mac OS X Audio Software
67 Reducing Monitoring Latency
73 CueMix FX
119 MOTU SMPTE Setup
123 Troubleshooting
125 Index

Produktspecifikationer

Varumärke: Motu
Kategori: hi-fi system
Modell: 828mk3 Hybrid
Färg på produkten: Zwart
Vikt: 340 g
Bredd: 75 mm
Djup: 151 mm
Höjd: 25 mm
Internationell säkerhetskod (IP): IP65
LED-indikatorer: Ja
Batterikapacitet: 3060 mAh
Blåtand: Ja
Beeldscherm: TFT
Skärm diagonal: 3.7 "
Upplösning: 480 x 640 Pixels
Pekskärm: Ja
Processorfrekvens: 0.806 GHz
Processorfamilj: PXA 320
Wi-Fi-standarder: 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth-version: 2.1+EDR
GPS: Ja
Bakre kameraupplösning (numerisk): 3.2 MP
Autofokus: Ja
Inkluderar operativsystem: Windows Mobile 6.5.3
Typ av anslutningskontakt: 3,5 mm
Medföljande kablar: USB
Kompatibla minneskort: MicroSD (TransFlash), MicroSDHC
Maximal bildfrekvens: 80 fps
Trillarm: Ja
Antal USB 2.0-portar: 1
Hörlursutgångar: 1
Certifiering: CE, FCC, PTCRB, GCF, RoHS, CTIA /IEEE 1725, IEC 60825-1 Class 2
Display, antal färger: 262144 kleuren
Luidsprekers: Mono
Bildsensortyp: CMOS
Inbyggd blixt: Ja
Inbyggd mikrofon: Ja
Röstinspelning: Ja
Internminne: 0.256 GB
Bildformat som stöds: JPG
Internminnestyp: SDRAM
Inbyggd kamera: Ja
Förvaringstemperatur: -30 - 80 °C
Processorfabrikant: Marvell
Datanätverk: 3.5G, 3G, EDGE, GPRS, HSPA, WCDMA
GSM-band stöds: 850,900,1800,1900 MHz
Flashminne: 0.512 GB
Infraröd dataport: Ja
Streckkoder som stöds (1D): Codabar, Code 128, Code 39, Code 93, GS1-128 (UCC/EAN-128), JAN, MSI, Plessey, Telepen, Trioptic, U.P.C.
Tangentbordslayout: QWERTY
Andra kameran: Nee
Telefonfunktion: Ja
RFID-läsare: Nee
Streckkodsläsare: Ja
Wifi: Ja
Drifttemperatur (TT): -10 - 50 °C
Batteriteknik: Lithium-Ion (Li-Ion)
2D (matris och staplade) streckkoder stöds: Aztec Code, Codablock, Composite Codes, Data Matrix, MaxiCode, Micro QR Code, MicroPDF417, PDF417, QR Code

Behöver du hjälp?

Om du behöver hjälp med Motu 828mk3 Hybrid ställ en fråga nedan och andra användare kommer att svara dig




hi-fi system Motu Manualer

Motu

Motu 16A AVB Bruksanvisning

9 September 2024
Motu

Motu 16A Bruksanvisning

20 Augusti 2024
Motu

Motu 112D Bruksanvisning

20 Augusti 2024
Motu

Motu LP32 Bruksanvisning

20 Augusti 2024
Motu

Motu 8M Bruksanvisning

20 Augusti 2024
Motu

Motu 24Ai Bruksanvisning

20 Augusti 2024
Motu

Motu Track16 Bruksanvisning

20 Augusti 2024
Motu

Motu M2 Bruksanvisning

20 Augusti 2024

hi-fi system Manualer

Nyaste hi-fi system Manualer