Nanlite FC-500C Bruksanvisning

Nanlite Lampa FC-500C

Läs nedan 📖 manual på svenska för Nanlite FC-500C (60 sidor) i kategorin Lampa. Denna guide var användbar för 12 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/60
USER MANUAL
Guangdong Nanguang Photo&Video Systems Co., Ltd.
FC-500C
LED RGBW Spot Light
FC-500C
WWW.NANLITE.COM
01
Thank you for purchasing Nanlite product -- FC-500C!
The FC-500C is the first RGBW full-color point light source in the FC series, offering a high-power, high-performance
lighting solution for content creation. It boasts a rated power of 520W, a wide color temperature range of 2700K-7500K,
±150 green and magenta adjustment, and 15 effects. It supports a wide range of colors through built-in HSI, RGBW,
and GEL modes. It provides multiple control options including on-board, remote controller, Nanlink App and DMX/RDM.
Designed with a Bowens mount and umbrella hole, it is compatible with Nanlite and other mainstream light control
accessories. Equipped with 4 fan modes (smart/full speed/low speed/off), it caters to both lighting and sound recording
needs.
The FC-500C, with its stylish and compact design, features built-in control on the lamp head. It also supports power
supply by the FC PowerController through cable connection or battery, making it convenient for elevated rigging and
outdoor shooting.
Introduction
WWW.NANLITE.COM
02
1. Please remove the COB protective cap before using the fixture.
2. Please do not look directly at the emitter when the fixture is on.
3. Please keep for 10s after settings before turn off the fixture.
4. Please do not place any object on the fixture or allow liquid to flow inside the fixture.
5. Please do not place the fixture near any flammable or volatile substances like alcohol or gasoline.
6. Please do not use strong detergent for cleaning. Please wipe off the dirt by using a cloth with neutral cleanser when
cleaning the fixture.
7. Please set up the fixture in a dry and well-ventilated place. Please do not use it in any humid, dusty or overheated
environment. Meanwhile, please also check whether the fan and vent are unimpeded.
8. Please do not disassemble the fixture to repair at will. Qualified professionals should conduct maintenance under the
condition of strictly following the operating procedures described in this manual.
9. Please do not cover the vents when using, to avoid affecting heat dissipation, and resulting in damage. Please pay
attention to anti-scald when using the fixture for a long time, since the surface temperature of fixture will be high.
Notice
WWW.NANLITE.COM
04
1. Handle 11. Reflector
13. Adjustable Handle
12. Umbrella Mount
14. Yoke
15. Bracket Fixing Knob
2. USB Port
3. Display Screen
4. Right Knob
5. Left Knob
6. MODE Button
7. MENU Button
8. DMX In/Out
9. Fixture Body
Input Socket
10. Power Switch
WWW.NANLITE.COM
05
16. Lock Catch
18. Power Socket
17. DC Output Socket
19. Quick Release Plate
WWW.NANLITE.COM
06
1. Handle: For lifting the fixture and adjusting the direction of light.
2. USB Port: For updating the firmware.
3. Display Screen: For displaying the settings.
4. Right Knob: For switching options.
5. Left Knob: For adjusting the parameters or switching among different selections.
6. MODE Button: For switching the lighting modes.
7. MENU Button: For switching between the lighting modes and the menu.
8. DMX In/Out: To connect the DMX adapter cable for DMX signal input and output.
(Note: DMX adapter cable is sold separately).
9. Fixture Body Input Socket: To connect the DC connection cable for connecting between fixture body and power supply.
10. Power Switch: For turning on/off the fixture.
11. Reflector: For gathering light to improve the central illumination.
12. Umbrella Mount: For installing and detaching an umbrella.
13. Adjustable Handle: For adjusting and fixing the direction of fixture in tilt.
14. Yoke: Enabling the fixture to be mounted on the light stand and allowing for the tilting of the fixture.
15. Bracket Fixing Knob: For securing the fixture on the light stand.
16. Lock Catch: For securing and detaching Bowens mount accessories.
17. DC Output Socket: To connect the DC connection cable to output DC power to the fixture body.
18. Power Socket: To connect the AC power cable for connecting the power supply to the AC power outlet.
19. Quick Release Plate: For mounting the quick release clamp.
Detailed Description
WWW.NANLITE.COM
07
Includes
FC-500C × 1 DC Connection Cable × 1Power Supply × 1
Quick Release Clamp x 1 AC Power Cable × 1
Reflector × 1 User Manual × 1Carry Case × 1
FC-500B/500C
USER MANUAL
Guangdong Nanguang Photo&Video Systems Co., Ltd.
FC-500C
LED RGBW Spot Light
FC-500C
WWW.NANLITE.COM
08
Usage
1. Installation and Detachment of Reflector
When installing the reflector, align
the reflector to the fixture's Bowens
mount, rotate the reflector in the
direction shown on the fixture until it
clicks into place.
When removing the reflector, push
and hold the lock catch and rotate
the reflector until it is free to be
removed from the fixture.
Press the lock catch to remove the
reflector.
2. Installation of Umbrella
Loosen the adjustable handle. Insert the umbrella into the
umbrella mount.
Tighten the adjustable handle to
lock the umbrella.
WWW.NANLITE.COM
09
MODE MENU
·The FC-500C is built with DMX In/Out, enabling it to be controlled by wired DMX/RDM.
▲The FC-500C is built with 2.4G and Bluetooth modules, enabling it to be controlled by the remote controller
or NANLINK APP.
▲Remote controller is sold separately.
▲The address needs to be set before operating the remote control via 2.4G, DMX or RDM.
1. 2.4G Control
The wireless protocol needs to be set before operating the remote control via remote controller.
Please set the fixture in V2.0 while using the WS-RC-C2 remote controller, and set it in V1.0 while using other remote
controllers.
1.1. Address Setting
Press the MENU button to enter the menu.
Remote Control
CCT MODE CH:512
100.0%
DIM
5600K
CCT
0
G/M
SMART
MENU CH: 512
ADDRESS/DMX
WIRELESS CONTROL
FAN CONTROL
ROTATE SCREEN
SCREEN BRIGHTNESS
SMART
WWW.NANLITE.COM
10
MENU CH: 512
ADDRESS/DMX
WIRELESS CONTROL
FAN CONTROL
ROTATE SCREEN
SCREEN BRIGHTNESS
SMART
MENU CH: 512
ADDRESS
DMX MODE
DMX REDUCED CHANNELS
DMX DIMMING CURVE
DMX SMOOTHING
SMART
MENU CH: 512
ADDRESS
DMX MODE
DMX REDUCED CHANNELS
DMX DIMMING CURVE
DMX SMOOTHING
SMART
Rotate the right knob to ADDRESS/DMX and press the right knob to enter the secondary menu.
Rotate the right knob to ADDRESS, and press the right knob to enter the tertiary menu.
MENU CH: 512
SMART
ADDRESS
512
PRESS ’MENU’ TO RETURN
WWW.NANLITE.COM
11
MENU CH: 512
ADDRESS/DMX
WIRELESS CONTROL
FAN CONTROL
ROTATE SCREEN
SCREEN BRIGHTNESS
SMART
MENU CH: 512
SMART
ADDRESS
511
PRESS ’MENU’ TO RETURN
MENU CH: 511
SMART
SET
MENU CH: 512
BLUETOOTH SETTINGS
2.4G SETTINGS
SMART
PRESS ’MENU’ TO RETURN
Rotate the right knob to select the address and press the right knob to set.
Note: Each FC-500C occupies 21 channels. When using DMX or RDM to control multiple FC-500C, the address for
the first fixture can be set to 001, the second to 022, the third to 043, and so on.
1.2. Wireless Protocol Setting
Rotate the right knob to WIRELESS CONTROL, and press the right knob to enter the secondary menu.
WWW.NANLITE.COM
12
MENU CH: 512
SMART
2.4G WIRELESS PROTOCOL
V1.0 V2.0
PRESS ’MENU’ TO RETURN
MENU CH: 512
BLUETOOTH SETTINGS
2.4G SETTINGS
SMART
PRESS ’MENU’ TO RETURN
MENU CH: 512
WIRELESS PROTOCOL
WIRELESS DMX
WIRELESS DMX UNIVERSE
SMART
PRESS ’MENU’ TO RETURN
MENU CH: 512
WIRELESS PROTOCOL
WIRELESS DMX
WIRELESS DMX UNIVERSE
SMART
PRESS ’MENU’ TO RETURN
Rotate the right knob to 2.4G SETTINGS, and press the right knob to enter the tertiary menu.
Rotate the right knob to WIRELESS PROTOCOL, and press the right knob to enter the next menu.
WWW.NANLITE.COM
13
MENU CH: 512
SMART
2.4G WIRELESS PROTOCOL
V1.0 V2.0
PRESS ’MENU’ TO RETURN
MENU CH: 512
SMART
SET
MENU CH: 512
WIRELESS PROTOCOL
WIRELESS DMX
WIRELESS DMX UNIVERSE
SMART
PRESS ’MENU’ TO RETURN
MENU CH: 512
OFF
ON
SMART
PRESS ’MENU’ TO RETURN
Rotate the right knob to select V1.0 or V2.0, and press the right knob to set.
Rotate the right knob to WIRELESS DMX, and press the right knob to enter the next menu.
WWW.NANLITE.COM
14
MENU CH: 512
SMART
WIRELESS DMX UNIVERSE
A
PRESS ’MENU’ TO RETURN
MENU CH: 512
SMART
SET
MENU CH: 512
WIRELESS PROTOCOL
WIRELESS DMX
WIRELESS DMX UNIVERSE
SMART
PRESS ’MENU’ TO RETURN
MENU CH: 512
OFF
ON
SMART
PRESS ’MENU’ TO RETURN
Rotate the right knob to select ON or OFF, and press the right knob to set.
When WIRELESS DMX is on, the WIRELESS DMX UNIVERSE can be selected.
Rotate the right knob to WIRELESS DMX UNIVERSE, and press the right knob to enter the next menu.
WWW.NANLITE.COM
15
MENU CH: 512
ADDRESS/DMX
WIRELESS CONTROL
FAN CONTROL
ROTATE SCREEN
SCREEN BRIGHTNESS
SMART
MENU CH: 512
SMART
WIRELESS DMX UNIVERSE
B
PRESS ’MENU’ TO RETURN
MENU CH: 512
SMART
SET
MENU CH: 512
BLUETOOTH SETTINGS
2.4G SETTINGS
SMART
PRESS ’MENU’ TO RETURN
Rotate the right knob to select the needed universe, and press the right knob to set.
Remote controller or transmitter box can't be used when wireless DMX is on.
Rotate the right knob to WIRELESS CONTROL, and press the right knob to enter the secondary menu.
2. Bluetooth Control
Bluetooth reset should be done on the fixture before using the NANLINK APP to control.
WWW.NANLITE.COM
16
Rotate the right knob to BLUETOOTH SETTINGS, and press the right knob to enter the tertiary menu.
Press the right knob enter the interface of RESET BLUETOOTH.
MENU CH: 512
BLUETOOTH SETTINGS
2.4G SETTINGS
SMART
PRESS ’MENU’ TO RETURN
MENU CH: 512
RESET BLUETOOTH
SMART
PRESS ’MENU’ TO RETURN
MENU CH: 512
RESET BLUETOOTH
SMART
PRESS ’MENU’ TO RETURN
MENU CH: 512
SMART
RESET BLUETOOTH
BACK RESET
PRESS ’MENU’ TO RETURN
WWW.NANLITE.COM
17
Rotate the right knob to RESET, and press the right knob to set.
3. DMX Control
3.1. For address settings, please refer to the instructions in section (1.1)
3.2. DMX Settings
①DMX Mode
Rotate the right knob to DMX MODE, and press the right knob to enter the tertiary menu.
MENU CH: 512
ADDRESS
DMX MODE
DMX REDUCED CHANNELS
DMX DIMMING CURVE
DMX SMOOTHING
SMART
PRESS ’MENU’ TO RETURN
MENU CH: 512
CCT&RGBW 8bit
CCT&RGBW 16bit
CCT&HSI 8bit
CCT&HSI 16bit
CCT 8bit
SMART
PRESS ’MENU’ TO RETURN
MENU CH: 512
SMART
RESET BLUETOOTH
BACK RESET
PRESS ’MENU’ TO RETURN
MENU CH: 512
SMART
SET
WWW.NANLITE.COM
18
MENU CH: 512
ADDRESS
DMX MODE
DMX REDUCED CHANNELS
DMX DIMMING CURVE
DMX SMOOTHING
SMART
PRESS ’MENU’ TO RETURN
MENU CH: 512
CCT&RGBW 8bit
CCT&RGBW 16bit
CCT&HSI 8bit
CCT&HSI 16bit
CCT 8bit
SMART
PRESS ’MENU’ TO RETURN
MENU CH: 512
SMART
SET
Rotate the right knob to select the DMX mode, and press the right knob to set.
②DMX REDUCED CHANNELS
Rotate the right knob to DMX REDUCED CHANNELS, and press the right knob to enter the tertiary menu.
MENU CH: 512
OFF
ON
SMART
PRESS ’MENU’ TO RETURN
WWW.NANLITE.COM
19
MENU CH: 512
ADDRESS
DMX MODE
DMX REDUCED CHANNELS
DMX DIMMING CURVE
DMX SMOOTHING
SMART
PRESS ’MENU’ TO RETURN
MENU CH: 512
LINEAR
EXPONENT
LOGARITHM
S CURVE
GAMMA 2.2
SMART
PRESS ’MENU’ TO RETURN
MENU CH: 512
SMART
SET
Rotate the right knob to select ON or OFF, and press the right knob to set.
③DMX DIMMING CURVE
Rotate the right knob to DMX DIMMING CURVE, and press the right knob to enter the tertiary menu.
MENU CH: 512
OFF
ON
SMART
PRESS ’MENU’ TO RETURN
WWW.NANLITE.COM
20
MENU CH: 512
ADDRESS
DMX MODE
DMX REDUCED CHANNELS
DMX DIMMING CURVE
DMX SMOOTHING
SMART
PRESS ’MENU’ TO RETURN
MENU CH: 512
LINEAR
EXPONENT
LOGARITHM
S CURVE
GAMMA 2.2
SMART
PRESS ’MENU’ TO RETURN
MENU CH: 512
SMART
SET
Rotate the right knob to select LINEAR, EXPONENT, LOGARITHM, S CURVE or GAMMA 2.2, and press the right knob to set.
④DMX SMOOTHING
Rotate the right knob to DMX SMOOTHING, and press the right knob to enter the tertiary menu.
MENU CH: 512
OFF
ON
SMART
PRESS ’MENU’ TO RETURN
WWW.NANLITE.COM
21
MENU CH: 512
SMART
SET
MENU CH: 512
OFF
ON
SMART
PRESS ’MENU’ TO RETURN
Rotate the right knob to select ON or OFF, and press the right knob to set.
3.3. DMX Connection
ln DMX control mode, the DMX output of the last light fixture should be connected with a DMX terminator (not included).
The terminator is connected with a 120Ω(OHM) resistor across Pin 2 and Pin 3 (As shown below). This prevents
interference caused by DMX signals in the transmitting process.
DMX Terminator Connection
Connect a 120Ω(OHM) resistor across
Pin 2 and Pin 3 in an XLR plug and
insert into the DMX OUT socket
on the last unit.
PIN 2 PIN 3
120Ω
1
2
3
5
4
WWW.NANLITE.COM
24
Rotate the right knob to select the needed lighting mode, and press the right knob to enter the corresponding lighting mode
interface.
2.1. CCT Mode
Rotate the right knob to select DIM (range: 0.0%-100.0%), CCT (range: 2700K-7500K) or G/M (range: -150 to 150),
and rotate the left knob to set the corresponding parameters.
Rotate the right knob to select the DIM, CCT or G/M.
MODE CH: 512
CCT MODE
HSI MODE
RGBW MODE
GEL MODE
EFFECT MODE
SMART
CCT MODE CH:512
100.0%
DIM
5600K
CCT
0
G/M
SMART
CCT MODE CH:512
100.0%
DIM
5600K
CCT
0
G/M
SMART
CCT MODE CH:512
100.0%
DIM
5600K
CCT
0
G/M
SMART
WWW.NANLITE.COM
25
HSI MODE CH:512
100.0%
DIM
100
HUE
0
SAT
SMART
CCT MODE CH:512
100.0%
DIM
5600K
CCT
0
G/M
SMART
CCT MODE CH:512
100.0%
DIM
5700K
CCT
0
G/M
SMART
Rotate the left knob to set the corresponding parameters.
Note: ①In other modes, the adjusting ranges of DIM, CCT and G/M are the same as in CCT mode.
②In other modes, press the left knob to set the DIM to 0.0%, press again to restore the brightness,
and press continuously to switch between on and off.
2.2. HSI Mode
Rotate the right knob to select DIM, HUE (range: 0-360) or SAT (range: 0-100), and rotate the left knob to set the
corresponding parameters.
Rotate the right knob to select DIM, HUE or SAT.
HSI MODE CH:512
100.0%
DIM
100
HUE
0
SAT
SMART
WWW.NANLITE.COM
26
HSI MODE CH:512
100.0%
DIM
100
HUE
0
SAT
SMART
100.0%
DIM
0
R
0
G
0
B
0
W
RGBW MODE CH:512
SMART
100.0%
DIM
0
R
0
G
0
B
0
W
RGBW MODE CH:512
SMART
HSI MODE CH:512
100.0%
DIM
100
HUE
0
SAT
SMART
Rotate the left knob to set the corresponding parameters.
Note: In other modes, the adjusting ranges of HUE and SAT are the same as in HSI mode.
2.3. RGBW Mode
Rotate the right knob to select DIM, Red (range: 0-255), Green (range: 0-255), Blue (range: 0-255) or
White (range: 0-255), and rotate the left knob to set the corresponding parameters.
Rotate the right knob to select DIM, Red, Green, Blue or White.
WWW.NANLITE.COM
27
100.0%
DIM
0
R
0
G
0
B
0
W
RGBW MODE CH:512
SMART
100.0%
DIM
1
R
0
G
0
B
0
W
RGBW MODE CH:512
SMART
2.4. Gel Mode
Rotate the right knob to select DIM, CCT (3200K or 5600K) or Gel, and rotate the left knob to set the corresponding
parameters or select the needed gel.
Rotate the right knob to select DIM, CCT or Gel.
Rotate the left knob to set the corresponding parameters.
Clear
DIM
5600K
CCT
0.0%
GEL MODE CH:512
SMART
Clear
DIM
5600K
CCT
0.0%
GEL MODE CH:512
SMART
WWW.NANLITE.COM
28
2.5. EFFECT Mode
FC-500C has 15 built-in effects, including HUE Loop, CCT Loop, INT Loop, Flash, Pulse,
Storm (Storm Auto and Storm Manual), Police Car, TV, Paparazzi, Candle/Fire, Disco, Bad Bulb, Firework,
Explosion (Explosion Auto and Explosion Manual) and Welding.
Rotate the left knob to select the needed effect, which can be selected in a loop.
Rotate the left knob to set the corresponding parameters or select the needed gel.
EFFECT MODE CH: 512
SMART
DIM:0.0%
HUE:0-360
SAT:100
SPEED:8S
EFFECT:HUE LOOP
EFFECT MODE CH: 512
SMART
DIM:0.0%-100.0%
COLOR:CCT
CCT:5600K G/M:0
SPEED:50 PAUSE:OFF
EFFECT:WELDING
Clear
DIM
5600K
CCT
0.0%
GEL MODE CH:512
SMART
Clear
DIM
3200K
CCT
0.0%
GEL MODE CH:512
SMART
HUE LOOP
.
.
.
WELDING
WWW.NANLITE.COM
29
①HUE LOOP
Rotate the right knob to select DIM, HUE, SAT or SPEED (range: 2s-30s), and rotate the left knob to set the
corresponding parameters.
Rotate the right knob to select DIM, HUE, SAT or SPEED.
Rotate the left knob to set the corresponding parameters.
EFFECT MODE CH: 512
SMART
DIM:100.0%
HUE:0-360
SAT:100
SPEED:8S
EFFECT:HUE LOOP
EFFECT MODE CH: 512
SMART
DIM:100.0%
HUE:0-360
SAT:100
SPEED:8S
EFFECT:HUE LOOP
EFFECT MODE CH: 512
SMART
DIM:100.0%
HUE:0-360
SAT:100
SPEED:8S
EFFECT:HUE LOOP
EFFECT MODE CH: 512
SMART
DIM:99.9%
HUE:0-360
SAT:100
SPEED:8S
EFFECT:HUE LOOP
WWW.NANLITE.COM
30
EFFECT MODE CH: 512
SMART
DIM:100.0%
CCT:3200K-5600K
G/M:0
SPEED:8S
EFFECT:CCT LOOP
EFFECT MODE CH: 512
SMART
DIM:100.0%
CCT:3200K-5600K
G/M:0
SPEED:8S
EFFECT:CCT LOOP
EFFECT MODE CH: 512
SMART
DIM:100.0%
CCT:3200K-5600K
G/M:0
SPEED:8S
EFFECT:CCT LOOP
EFFECT MODE CH: 512
SMART
DIM:99.9%
CCT:3200K-5600K
G/M:0
SPEED:8S
EFFECT:CCT LOOP
②CCT LOOP
Rotate the right knob to select DIM, CCT, G/M or SPEED (range: 2s-30s), and rotate the left knob to set the
corresponding parameters.
Rotate the right knob to select DIM, CCT, G/M or SPEED.
Rotate the left knob to set the corresponding parameters.
WWW.NANLITE.COM
32
④FLASH
Rotate the right knob to select DIM or COLOR (CCT or HSI).
When the COLOR is set to CCT, rotate the right knob to select CCT, G/M or INTERVALS (range: 0.1s-10.0s), and rotate
the left knob to set the corresponding parameters.
Rotate the right knob to select CCT, G/M or INTERVALS.
Rotate the left knob to set the corresponding parameters.
When the COLOR is set to HSI, rotate the right knob to select HUE, SAT or INTERVALS (range: 0.1s-10.0s),
and rotate the left knob to set the corresponding parameters. (Same operation as when COLOR is set to CCT)
EFFECT MODE CH: 512
SMART
DIM:100.0%
COLOR:CCT
CCT:5600K G/M:0
INTERVALS:1.0S
EFFECT:FLASH
EFFECT MODE CH: 512
SMART
DIM:100.0%
COLOR:CCT
CCT:5600K G/M:0
INTERVALS:1.0S
EFFECT:FLASH
EFFECT MODE CH: 512
SMART
DIM:100.0%
COLOR:CCT
CCT:5600K G/M:0
INTERVALS:1.0S
EFFECT:FLASH
EFFECT MODE CH: 512
SMART
DIM:99.9%
COLOR:CCT
CCT:5600K G/M:0
INTERVALS:1.0S
EFFECT:FLASH

Produktspecifikationer

Varumärke: Nanlite
Kategori: Lampa
Modell: FC-500C

Behöver du hjälp?

Om du behöver hjälp med Nanlite FC-500C ställ en fråga nedan och andra användare kommer att svara dig


Lampa Nanlite Manualer

Nanlite

Nanlite FS-300C Bruksanvisning

19 December 2024
Nanlite

Nanlite FC-120B Bruksanvisning

19 December 2024
Nanlite

Nanlite FC-500B Bruksanvisning

19 December 2024
Nanlite

Nanlite Compac 20 Bruksanvisning

19 December 2024
Nanlite

Nanlite Compac 68 Bruksanvisning

19 December 2024
Nanlite

Nanlite 600CSA Bruksanvisning

19 December 2024
Nanlite

Nanlite LitoLite 5C Bruksanvisning

19 December 2024
Nanlite

Nanlite FC-500C Bruksanvisning

19 December 2024
Nanlite

Nanlite 1200SA Bruksanvisning

19 December 2024
Nanlite

Nanlite Forza 60CR Bruksanvisning

19 December 2024

Lampa Manualer

Nyaste Lampa Manualer

Theben

Theben theLeda B10L Bruksanvisning

8 April 2025
Theben

Theben theLeda P24L Bruksanvisning

8 April 2025
Integral LED

Integral LED ILSTRGBWB028E Bruksanvisning

5 April 2025
Integral LED

Integral LED ILSTWHIA101E Bruksanvisning

5 April 2025
Hoffman

Hoffman LF120V18 Bruksanvisning

5 April 2025
Hoffman

Hoffman LF120V28 Bruksanvisning

5 April 2025
NUVO

NUVO Arabel 60/6967 Bruksanvisning

4 April 2025
NUVO

NUVO Gotham 60/191 Bruksanvisning

4 April 2025
NUVO

NUVO Cordello 60/7884 Bruksanvisning

4 April 2025
NUVO

NUVO Clarksville 60/8061 Bruksanvisning

4 April 2025