Newstar NS-431H Bruksanvisning

Newstar Annat datortillbehör NS-431H

Läs nedan 📖 manual på svenska för Newstar NS-431H (12 sidor) i kategorin Annat datortillbehör. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/12
Table of Content
Table of Contents
Introduction
Overview………...…………………………………………..….1
Content….…………………………………………………..…..1
Features……………….………………………………………..2
Installations
PC BIOS Notice.……………………………………………….3
Adhesive Rubber Feet.…………………………………….….4
Console Connection……………….……………………..…...4
Computers Connection………………………………….…….4
Operations
Front Panel operation……………………………………...….7
OSD (On-Screen Display) Operation…………………….....8
Hot-Key Commands……………………………………….…13
Cascade Configuration
Connection…………………………………………...…..…...16
Computer Selection…..……………………………..…..…...16
Sun Keyboard Mapping……………………...……….…….17
Appendix
Specifications………………………………….………………18
Troubleshooting………………………..……...….…………..19
Please read this manual thoroughly and follow the
Installation procedures to prevent any damage to the NewStar
Switch or any connecting device.
This device is tested and complies with Part 15 of FCC/class B, CE
and VCCI rules.
1
-----------------
-----------------
-----------------
---------------------------------- Introduction
Overview
The hybrid USB and PS/2 KVM switches – NS431H, NS831HD, and
NS1631HD extend your computer management to either PS/2 and/or
USB models, or both from a single PS/2 console. With the
Sync-EmuTM Technology, the advanced NS831HD, and NS1631HD
are designed to meet the special requirements from USB-ready HP
Unit systems and Sun servers. Engineered for servers of the highest
level, the NS831HD, and NS1631HD guarantee flawless switching
with zero tolerance.
Installation is as easy as connecting USB A-B cables or PS/2 cables in
between computers and the NewStar switch. Selecting a computer is
as easy as front panel button pressing or by entering hotkey
commands. The innovated KVM technology ensures smooth switching
from one computer to the other and signal conversion from PS/2 to
USB. No more tangled cables and messy working environment; let the
NEWSTAR SWITCH switches do the computer switching for you.
NewStar Switch Content
KVM switch x 1
Power Adapter x 1
Foot Pad x 1 set
Bracket x 2 (optional)
User’s Manual x 1
PS/2 Y-Adapter x 4/6/12 for 4/8/16-port model
2
8-port KVM Switch configuration
Features
z Manage from 4 to 16 USB-enabled PCs, iMacs from one PS/2
keyboard, one mouse, and one monitor.
z For computer with USB or PS/2 interface.
z Front panel push-buttons for easy computer selection.
z Support keyboard and mouse Plug-and-Play.
z Buzzer sound for computer switching confirmation.
z High VGA resolution up to 1920*1440.
z Activate Auto Scan by front buttons pressing.
z USB specification compliant.
z Support the latest DDC2B VGA monitor.
z OSD menu for server naming and selection. (OSD Models only)
z Support USB-ready HP Unix and Sun servers. (OSD Models
only)
3
-----------------
-----------------
-----------------
---------------------------------- Installation
PC BIOS Notice
The following BIOS setup changes are necessary for PC users using
USB and not necessary for Mac users:
1. In STANDARD CMOS, set HALT ON ERROR to ALL BUT
KEYBOARD.
2. In PNP AND PCI SETUP, set PNP OS INSTALLED to YES and set
USB IRQ to ENABLED.
3. For newer computers: in INTEGRATED PERIPHERALS, set USB
CONTROLLER and KEYBOARD SUPPORT to ENABLED.
Also, make sure USB is properly selected in Device Manager under
Control Panel, as shown in Figure 1.
Figure 1: PC BIOS Notice
Note: For NS431H, switching from one computer to the other is
equivalent to unplugging the USB device from one computer
and plugging it to another. For certain computers neither
accept plug-and-play nor USB hub, the OSD models deal with
it by the advanced Sync-EmuTM Technology emulating USB
devices at all ports individually.
4
Adhesive Rubber Feet
For the desktop operation, you may stick the four round rubber feet
(supplied with the unit) to the bottom of the NewStar Switch. NOTE:
Give the rubber feet a firm press to the enclosure when applying them.
Do not use the rubber feet for rack mount operation.
Console Connection
Before installation, make sure all devices and computers to be
connected to the KVM switch have been turned off.
Plug a monitor to the Console's VGA port; connect a PS/2 mouse and
a keyboard to the port marked with a mouse and a CONSOLE
keyboard as shown in Figure 2.
Figure 2: Console Connection
Computers Connection
Use a HDB15 male-to-female cable to connect from a computer's
VGA output to VGA port of PC side, as shown in Figure 3, Figure 4,
and Figure 5.
For USB computer: Use a USB A-B cable to connect from one of
the PC ports to the USB port on the corresponding computer (A
connector, flat connector), as shown in Figure 3.

Produktspecifikationer

Varumärke: Newstar
Kategori: Annat datortillbehör
Modell: NS-431H

Behöver du hjälp?

Om du behöver hjälp med Newstar NS-431H ställ en fråga nedan och andra användare kommer att svara dig


Annat datortillbehör Newstar Manualer

Newstar

Newstar NS1631D Bruksanvisning

2 September 2024
Newstar

Newstar NS-211KA Bruksanvisning

31 Augusti 2024
Newstar

Newstar NS231USB Bruksanvisning

29 Augusti 2024
Newstar

Newstar NS-431D Bruksanvisning

29 Augusti 2024
Newstar

Newstar NS-431H Bruksanvisning

26 Augusti 2024

Annat datortillbehör Manualer

Nyaste Annat datortillbehör Manualer

Avocent

Avocent AVCTBND1 Bruksanvisning

26 Oktober 2024
Panasonic

Panasonic CF-VEB522 Bruksanvisning

24 Oktober 2024
Sony

Sony PCGA-AC71 Bruksanvisning

20 Oktober 2024
Dell

Dell WD19DC Bruksanvisning

14 Oktober 2024
Lenco

Lenco IPT-223 Bruksanvisning

13 Oktober 2024
Acer

Acer USB Type-C Dock III Bruksanvisning

8 Oktober 2024
Sony

Sony PCGA-CG10 Bruksanvisning

8 Oktober 2024
Origin Storage

Origin Storage OSDOCK-MMUSBCA Bruksanvisning

3 Oktober 2024
Origin Storage

Origin Storage OSDOCK-USBC Bruksanvisning

3 Oktober 2024
Origin Storage

Origin Storage OSDOCK-USB3 Bruksanvisning

3 Oktober 2024