StarTech.com CDP2HVGUASPD Bruksanvisning

StarTech.com Annat datortillbehör CDP2HVGUASPD

Läs nedan 📖 manual på svenska för StarTech.com CDP2HVGUASPD (2 sidor) i kategorin Annat datortillbehör. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: March 20, 2020 2:13 PM

Product Diagram (CDP2HVGUASPD)

Component Function

1VGA Port • Used to connect a to the Display Device

Docking Station.

2HDMI Port

• Used to connect a to the Display Device

Docking Station.

• Maximum Resolution = 4K30.

3MicroSD Card Slot • Used to connect an to theMicroSD Card

Docking Station.

4USB-C Port

• Used to connect a to the USB Device Docking

Station.

• Power Delivery (PD) 3.0 Specication.

• Charge with up to 85W.Host Computer

5USB-A Port

• Used to connect a to the USB Device Docking

Station.

• Supports BC1.2 5V/1.5A (7.5W) charging.

Note: When using Bus Powered mode to power

the , the needs Docking Station Docking Station

to be connected to a 15W USB-C port on the Host

Laptop, in order to use the fast charge function.

6RJ45 Port • Used to connect a to the Network Device

Docking Station.

7Integrated USB-C Cable • Used to connect the to the Docking Station

Host Computer.

USB-C to HDMI/VGA + GbE + USB-A + PD 3.0 and Presentation Mode

8Presentation Mode Switch

• Used to prevent the connected Host Computer

from going into sleep mode or placing a

connected into standby mode.Display Device

Requirements

For the latest requirements, please visit www.startech.com/CDP2HVGUASPD

Powering the Docking Station

Bus Powered

• Connect the on the to a on Integrated USB-C Cable Docking Station USB-C Port

the .Host Computer

PD Passthough

1. Connect a (sold separately) to the on the USB-C Power Adapter USB-C Port

Docking Station.

Note: The USB-C port on the must support USB Power Delivery to Host Computer

power and charge the Host Computer.

2. Connect the on the to a USB-C port on Integrated USB-C Cable Docking Station

the .Host Computer

3. Connect the to an .USB-C Power Adapter AC Electric Outlet

Connecting the Docking Station

1. Connect a to the on the USB-A Device USB-A Port Docking Station.

2. If using the method to power the , you can connect a Bus Powered Docking Station

USB-C Device USB-C Port Docking Station to the on the .

3. For information regarding the see the MicroSD Card Slot, Inserting/Removing

MicroSD Card section.

4. Connect an to the on the and the other HDMI Cable HDMI Port Docking Station

end to and HDMI port on the .Display Device

5. Connect an to the on the and the other end VGA Cable VGA Port Docking Station

to and VGA port on the .Display Device

Note: If two are connected to both the and at the same Displays HDMI VGA Ports

time, the connected to the will take priority.Display HDMI Port

6. Connect a (or better) to the on the and the CAT5 Cable RJ45 Port Docking Station

other end to an RJ45 port on a .Network Device

1 2 3 4 5

7 8

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void

the user’s authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may

cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation

est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,

même si le brouillage est susceptible d’en compromettre le fonctionnement.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-

party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only

and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which

this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered

trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the

property of their respective holders.

Warranty Information

This product is backed by a three-year warranty.

For further information on product warranty terms and conditions, please refer to .

www.startech.com/warranty

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of

business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.

Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations

or exclusions contained in this statement may not apply to you.

Safety Measures

• If product has an exposed circuit board, do not touch the product under power.

Mesures de sécurité

• Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous tension.

安全対策

•  製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください。

Misure di sicurezza

• Se il prodotto p2-ha un circuito stampato visibile, non toccare il prodotto quando è acceso.

Säkerhetsåtgärder

• Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com Ltd.

45 Artisans Cres

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Rd,

Brackmills

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

2500 Creekside

Parkwy

Lockbourne, Ohio

43137

U.S.A.

3. Click on the icon. Safely Remove Hardware

4. The screen will appear. Safely Remove Hardware

5. Select the , a message will appear telling you when it is safe to MicroSD Card

remove the from the on the . MicroSD Card MicroSD Card Slot Docking Station

macOS

• On the , click and drag the icon to the icon. The Desktop USB Storage Trash Can

Trash Can Eject icon will turn into an icon indicating that it is safe to remove the

MicroSD Card MicroSD Card Slot Docking Station from the on the .

Physically Removing the MicroSD Card

1. Push the into the on the until MicroSD Card MicroSD Card Slot Docking Station

the clicks. The will be ejected from the MicroSD Card MicroSD Card MicroSD Card

Slot.

2. Pull the out of the .MicroSD Card MicroSD Card Slot

Driver Installation

The drivers should install automatically, however, if they do not, you will need to

manually install the driver.

1. Download the drivers from www.startech.com/CDP2HVGUASPD. Click on the

Support Drivers tab, under , select the appropriate driver package for the Operating

System Host Computer running on the .

2. Once you have download and unzipped the driver. Click on the Installation Guide

PDF and follow the instructions.

Presentation Mode Switch

• Slide the from o to on to prevent the connected Presentation Mode Switch Host

Computer Display Device from going into sleep mode or placing a connected into

standby mode.

Inserting/Removing MicroSD Card

Inserting

1. Insert an , label side up, into the on the MicroSD Card MicroSD Card Slot Docking

Station.

2. Once inserted, push the into the until it clicks into MicroSD Card MicroSD Card Slot

place.

Note: The will automatically detect the Host Computer’s Operating System (OS)

MicroSD Card and install the required driver software.

3. Access the data stored on the inserted in step 1.MicroSD Card

Note: The may require formatting before they appear up on the MicroSD Cards Host

Computer.

Removing

Warning: Removal of an before it is safe could result in the loss or MicroSD Card

corruption of data on the . MicroSD Card

Windows

1. Click on the arrow on the right side of the . Up Taskbar

2. The will pop up, revealing a set of icons.System Tray

Produktspecifikationer

Varumärke:	StarTech.com
Kategori:	Annat datortillbehör
Modell:	CDP2HVGUASPD

Behöver du hjälp?

Om du behöver hjälp med StarTech.com CDP2HVGUASPD ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Annat datortillbehör StarTech.com Manualer

StarTech.com DK31C3HDPD Bruksanvisning

29 December 2024

StarTech.com DK30A2DHUUE Bruksanvisning

29 December 2024

StarTech.com CDP2HVGUASPD Bruksanvisning

29 December 2024

StarTech.com 129UE-USBC-KVM-DOCK Bruksanvisning

7 December 2024

StarTech.com DK30CHHPD Bruksanvisning

7 December 2024

StarTech.com 155NA-USB4-DOCK Bruksanvisning

26 September 2024

StarTech.com 155UE-USB4-DOCK Bruksanvisning

26 September 2024

StarTech.com ST7300USBME Bruksanvisning

24 September 2024

StarTech.com 101N-USBC-DOCK Bruksanvisning

24 September 2024

StarTech.com USB31C2SAT3 Bruksanvisning

24 September 2024

Annat datortillbehör Manualer

Nyaste Annat datortillbehör Manualer

Icy Box IB-DK2252AC Bruksanvisning

30 December 2025

Icy Box IB-NH300 Bruksanvisning

30 December 2025

Icy Box IB-553SSK Bruksanvisning

30 December 2025

Iiyama OMK5-1 Bruksanvisning

30 December 2025

Middle Atlantic LACE-40-OP Bruksanvisning

27 December 2024

Middle Atlantic RC-4 Bruksanvisning

27 December 2024

Alogic Elite Power EPLSWCBK Bruksanvisning

24 December 2024

Dell 470-ACWN Bruksanvisning

23 December 2024

SMK-Link VP3610 Bruksanvisning

19 December 2024

Sharkoon SHARK XTend 16 Bruksanvisning

19 December 2024