Optima W TC500 Bruksanvisning

Optima Termostat W TC500

Läs nedan 📖 manual på svenska för Optima W TC500 (4 sidor) i kategorin Termostat. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/4

pumpcontroller / thermostat TC-500 WIFI

This Plug-in thermostat is designed to be used as a pumpcontroller or thermostat with internal or external sensor.

Keys features

 Plug in design make it easy to install.

 Three buttons make it easy to operate.

 Heat Mode, Cool Mode Available.

 The display shows the temperature and the set mode.

 Temperature display in degrees Celsius.

 Simple coding in display for each function.

 With EEPROM backup

 Heat Pump Protection

 TUYA compatible

 Programmable time/temperature via TUYA

Technical data

Output Voltage: 230Vac

Switching Capacity: 3600W/16A (ohmic load)/3A cap.load

Backup storage: EEPROM

Sensor Mode: Internal sensor or external sensor

Temperature settings: 0°C ~ 65°C. (default: 28°C)

Accuracy: +/- 0.5°C (+/- 1°F).

Thermostat dimension: 70 mm x 41.5 mm x 140mm.

Color: White

IP protection rating: 20 (sensor IP44).

Certification: CE, EN.

Parameter settings

Under status, press “+” button andoff “-”button at the same time to enter into the parameter settings. Each press of the on/off button you

enter to the next item setting. With the “+” or “-”button you be able to change the settings.

No. Item Range Default

01 Temp. Calibration -9 +9 0 ℃ ～ ℃ ℃

02 Mode 0: Cool 1: Heat 0: Cool

03 Sensor Mode 0: Air 1: External 1: External

04 Dead Band / Hysterese

0.5 9 0.5 ～

06 Heat pump protection 0 OFF 1: ON 1: ON ：

07 Software Version 1013

08 Reset 0:No 1:yes 0

NOTE: when pumpprotection function is enabled the controller activate every 11 hours for aprox 30sec. when there is no

request for heat!

LCD Display

Each set includes;

- Plugin controller

- External sensor

- Clamp for conduit

- Manuel

Icons:

Heat Mode

Cool Mode

Pump Protection On

Pump Protection OFF

External Sensor

Air Sensor

pumpcontroller / thermostat TC-500 WIFI

How to use the TC 500 as a pumpcontroller (floorheating)

How to use the TC 500 as a thermostat with external or internal sensor

1) Add the plug of the external sensor into the connector of the

controller.

2) Connect the sensor onto a heating pipe. Normally you can

mount the sensor before the valve, in some cases you must

mount the sensor between the valve and the manifold. Just

use the clamps to do this.

3) Plugin the plug of the pump into the socket of the controller.

4) Check if the settings (see page 1) are set in the right

configuration (cooling mode, heat pump protection ON,

Sensor mode external)

5) Set the desired temperature (aprox 28’C)

NOTE: when the controller is set on external sensor and the

external sensor is NOT connected the controller shown 00,0’C in

The TC500 plugin thermostat can also used for several of other applications like terrarium heating or for other cooling / heating applications. Just

set the desired heating or cooling mode via the advanced settings. For example terrarium heating you should set this in heatmode and pump

protection function disabled (off). The sensor mode should be set on external sensor.

The TC500 controller can be used for many heating or cooling applications. The TC500 has also a build in sensor which can be used for

measuring and switching based on air temperature. When the external sensor is add into water then the sensor must be protected with a

sensortube which should be closed on one end. Beware that the sensor has a IP rate of 44!

When using the clamp to mount the sensor onto a conduit, beware that the sensor is not being damaged. Don’t use extremely force to mount the

sensor on the conduit.

Howto connect with TUYA;

Turn the controller ON. Push and hold the ON/OFF button. In the right corner the digit 11 appears. Press the + button, the digit 11 start blinking.

When the TUYA app is already on your phone or tablet, just add THERMOSTAT within the tuya app and start connecting.

Just follow the instructions on your screen. Some settings can only be adjusted via the controller itself. Temperature, time, day and date can be

adjusted via de app. Within the app you can make a program by time, date and temperature. Also heat/cool mode can be changed. Other settings

are childlock and timer function.

pumpcontroller / thermostat TC-500 WIFI

Deze plugin thermostaat is ontworpen om te kunnen functioneren als een pompschakelaar of als een thermostaat met een externe of

een interne sensor.

Eigenschappen

 Eenvoudige montage middels het plug in design.

 Eenvoudige bediening middels de drie drukknoppen.

 Verwarmen / koelen functie.

 De display geeft de temperatuur en de functies weer.

 Temperatuur waarde in graden Celcius.

 Simpele weergave codering.

 Voorzien van EEPROM opslag

 Pomp protectie functie

 TUYA compatible

 Programmeerbaar, tijd, dag en datum via TUYA

Technische gegevens

Spanning: 230Vac

Schakel belasting: 3600W/16A(ohmse belasting)/3A cap.

Geheugen opslag: EEPROM

Sensor Modus: Interne of externe sensor

Temperatuur instelling: 0°C ~ 65°C. (standaard: 28°C)

Nauwkeurigheid: +/- 0.5°C (+/- 1°F).

Afmeting: 70 mm x 41.5 mm x 140mm.

Kleur: Wit

IP waarde: 20 (sensor IP44).

Certificering: CE, EN.

Parameter instellingen

Wanneer de controller is uitgeschakeld, druk op de “+” EN “-” toets (tegelijkertijd) om de parameters in de geavanceerde instellingen te

wijzigen. Druk op de Aan/Uit toets om naar een volgend item te scrollen. Middels de “+” of “-” toets kunt u de instellingen wijzigen.

No. Item Bereik Standaard

01 Temp. kalibratie -9 +9 0 ℃ ～ ℃ ℃

02 Modus 0: Koel 1: Verwarmen 0: Koelen

03 Sensor Modus 0: Intern 1: Extern 1: Externe sensor

04 Hysterese 0.5 9 0.5 ～

06 Pomp protectie 0 UIT 1: AAN 1: AAN ：

07 Software Versie 1013

08 Reset 0: nee 1:ja 0

LET OP: wanneer de pompprotectie is ingeschakeld zal de controller elke 11 uur voor ca. 30 seconden worden geactiveerd

(wanneer er geen vraag is naar warmte of koude, en afhankelijk van de instellingen)!

LCD Display

Elke set is inclusief;

- Plugin controller

- Externe sensor

- Montagebeugel tbv sensor bevestiging op buis

- Handleiding

Iconen:

Verwarmings modus

Koel Modus

Pomp protectie AAN

Pomp Protectie UIT

Externe sensor

Interne sensor

Produktspecifikationer

Varumärke:	Optima
Kategori:	Termostat
Modell:	W TC500
Färg på produkten:	Zwart
Integrerad klocka:	Ja
Strömförsörjning:	AC 100- 240V
Anslutningsteknik:	Bedraad
Inbyggda högtalare:	Ja
Linjeingång:	Ja
Frekvensband som stöds:	FM, MW
Antal förinställda kanaler:	12
Alarmet:	Ja
Radio:	Draagbaar
Fjärrkontroll ingår:	Ja
Type beeldscherm:	LCD