Peavey RBN 118 Bruksanvisning

Peavey högtalare RBN 118

Läs nedan 📖 manual på svenska för Peavey RBN 118 (20 sidor) i kategorin högtalare. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/20
www.peavey.com
RBN 118 Sub
Powered Speaker System
Operating
Manual
FCC/ICESCompliancyStatement
This Standard(s).  device complies with Part 15 of  the RSS  FCC rules and  Industry Canada license‐ exempt  Operation is
subject following harmful interference, andtothe twoconditions:(1)thisdevicemaynotcause  (2)thisdevicemust
accept any interference may operation.  received, that   cause undesired
Le conforme deprésent est appareil  aux CNR Canada d’lndustrie   applicables aux appareils radio exempts 
licence. est autoriséeL’exploitation   aux deux conditions suivantes: (1) I’appareil ne dedoit  pas produire
brouillage, (2) I’utilisateur I’appareil brouillage leet  de doitacceptertout radioélectriquesubi,mêmesi 
brouillage susceptible fonctionnement.est d’encompromettrele 
Warning:    Changes or modifications to the equipment not approved by Peavey Electronics Corp. can void the
user’s  authority to use the  equipment.
Note –   This equipment has been tested and found to comply with the limits for a Class Bdigital device,
pursuant to Rules. limits to provide reasona protection against Part15oftheFCC These aredesigned  ble  
harmful in a residential installation. generat uses, and radiointerference   Thisequipmentes,  canradiate 
frequency energy and, if installed and in accordance with t instructions, harmful  not  used he maycause 
interference to dio However, ra communications. thereis gua that interference will occur in anorantee  not  
particular rainstallation.If  this equipment does cause harmful interference to dio television reception,or 
which turning equipment and t is to andcanbedeterminedby the off on,heuser encouraged try correctthe
interference followingbyoneormoreofthe measures.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Caution
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
Introduction
ank you for purchasing the Peavey® RBN™118 Sub powered speaker system. e RBN™118 Sub features a
power section that provides 2000 watts of peak power, with DDT™ compression. Featuring an 18” Low Rider™
woofer in a sturdy plywood enclosure, the RBN™118 Sub provides two mixed input channels, each with Gain
control and a mic/line gain switch, and each channel features a combo jack with 1/4” TRS & female XLR and a
balanced input with volume control. A DSP based crossover and processor provides extreme exibility to the
user faced with common location acoustics conditions.
Features
Vented bass powered subwoofer enclosure
2000 watts peak dynamic power
Peavey® exclusive Low Rider™ 18” Woofer
Peak SPL up to 128 dB with music!
Power Amp has forced air cooling for maximum reliability
Powerful yet precise DSP based crossover network and speaker processing
24 bit ADC/DAC, 96 kHz sample rate, 32 bit xed point DSP
DSP based limiter for woofer protection
Two independent mixed channels with XLR/one quarter inch combo jack inputs
Input 2 has a 3.5 mm (1/8”) stereo media input jack
Two XLR outputs, One High-Pass, One Full Range ru
Large Heavy-Duty Locking Casters with damped bearings
Full-coverage heavy-duty perforated steel grill
Tough 18 mm birch plywood construction with internal bracing
Two Pairs of Steel handles
readed Pole Mount with speaker pole included
Description
e Peavey® RBN™ 118 Sub is a compact vented powered subwoofer system utilizing a Peavey® exclusive Low
Rider™ 18” woofer, coupled to a power amplier with 2,000 watts peak available power.e full-length black
perforated steel grille provides protection and a professional appearance, along with the sturdy steel handles
and heavy-duty 4” tall casters for transport.
Internal line-level crossover with two outputs, independently electrically buered; one full-range thru output,
and one high-pass output.
A threaded pole-mount system provides a sturdy and stable platform to mount a suitably equipped speaker
system above the sub woofer. Either the RBN™112 or the RBN™110 two-way powered speakers are an excellent
partner for the RBN™ 118 Sub.
e RBN™ 118 Sub speaker system power amplier providing the power is a low-distortion ultra-reliable fan-
cooled unit providing 2,000W peak available power for the system. e power supply for the power amp is a
switch mode type for low weight and high eciency. e amplier features our DDT™ compression, which
virtually eliminates audible power amplier clipping. Cooling is provided via a low-noise fan, for reliable oper-
ation under any conditions.
ENGLISH

Produktspecifikationer

Varumärke: Peavey
Kategori: högtalare
Modell: RBN 118

Behöver du hjälp?

Om du behöver hjälp med Peavey RBN 118 ställ en fråga nedan och andra användare kommer att svara dig




högtalare Peavey Manualer

högtalare Manualer

Nyaste högtalare Manualer