Peavey SP 218P Bruksanvisning

Peavey högtalare SP 218P

Läs nedan 📖 manual på svenska för Peavey SP 218P (22 sidor) i kategorin högtalare. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/22
www.peavey.com
SP®218P
Powered Speaker System
Product
Specications
FCC/ICES Compliancy Statement
This device complies with Part 15 of the FCC rules and Industry Canada license exempt RSS Standard(s). Operation is -
subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, that may cause undesired operation.
Le présent appareil est conforme aux CNR d’lndustrie Canada applicables aux appareils radio exempts de
licence. L’exploitation est autorisée aux deux conditions suivantes: (1) I’appareil ne doit pas produire de
brouillage, et (2) I’utilisateur de I’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
Warning: Changes or modifications to the equipment not approved by Peavey Electronics Corp. can void the
user’s authority to use the equipment.
Note – This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, , uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try and correct the
interference by one or more of the following measures.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Caution
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
ENGLISH
SP®218P
Introduction
Thank you for purchasing the Peavey® S218P Sub powered speaker system. The SP® 218P Sub features
a power section that provides 2,000 watts of peak power, with DDT™ compression. Featuring two Peavey®
exclusive 18” Pro Rider™ woofers in a sturdy plywood enclosure, the SP® 218P Sub provides two mixed input
channels, each with Gain control and a mic/line gain switch, and each channel features a combo jack with 1/4”
TRS & female XLR and a balanced input, with volume control. A DSP based crossover and processor provides
extreme flexibility to the user faced with common location acoustics conditions.
VENTED BASS POWERED SUBWOOFER ENCLOSURE
2,000 WATTS PEAK AVAILABLE POWER
TWO PEAVEY® EXCLUSIVE PRO RIDER™ 18” WOOFERS
POWER AMP HAS FORCED AIR COOLING FOR MAXIMUM RELIABILITY
POWERFUL YET PRECISE DSP BASED CROSSOVER NETWORK AND SPEAKER PROCESSING
DSP BASED LIMITER FOR WOOFER PROTECTION
24 BIT ADC/DAC, 96 KHZ SAMPLE RATE, 32 BIT FIXED POINT DSP
TWO CHANNELS WITH XLR/ONE QUARTER INCH COMBO JACK INPUTS
TWO XLR OUTPUTS, ONE HIGH-PASS, ONE FULL RANGE THRU
FULL-COVERAGE HEAVY-DUTY PERFORATED STEEL GRILL
TWO METAL HANDLES, ONE EACH SIDE, AND TOP REAR CORNER HANDLE
TILT-BACK CASTERS FOR EASE OF TRANSPORT.
THREADED POLE MOUNT WITH SPEAKER POLE INCLUDED
Description
The Peavey® SP® 218P Sub is a vented powered subwoofer system utilizing two Peavey® exclusive Pro Rider™ 18”
woofers, coupled to a power amplifier with 2,000 watts peak available power. The full-length black perforated
steel grille provides protection and a professional appearance, along with the steel handles and tilt-back casters
for transport.
Internal line-level crossover with two outputs, independently electrically buffered; one full-range thru output,
and one high-pass output.
A threaded pole-mount system provides a sturdy and stable platform to mount a suitably equipped speaker
system above the sub woofer. Either the SP®2P or the SP®4P two-way powered speakers are an excellent partner
for the SP® 218P Sub
The SP® 218P Sub speaker system power amplifier providing the power is a low-distortion ultra-reliable
fan-cooled unit providing 2,000W peak available power for the system. The power supply for the power amp is
a switch mode type for low weight and high efficiency. The amplifier features our DDT™ compression, which
virtually eliminates audible power amplifier clipping. Cooling is provided via a low-noise fan, for reliable
operation under any conditions.
Input is via two channels of a combo female XLR and 1/4” TRS phone jack with balanced input to the preamp/
EQ electronics, and a level control.
The internal speaker crossover and processor is implemented with a high-performance DSP system. Using 24
bit ADCs and DAC’s operating at 96 kHz, the 32 bit fixed point DSP processor provides all the filtering and
EQ functions to allow the subwoofer to operate at its best. DSP based limiting works in conjunction with the
DDT™ compression to improve woofer reliability without intruding into the musical performance. An LCD
display shows what functions or presets have been selected, these functions are selected via a push-to-select
rotary knob.
A High-Pass output provides a buffered and balanced output signal for a satellite speaker to carry the high

Produktspecifikationer

Varumärke: Peavey
Kategori: högtalare
Modell: SP 218P

Behöver du hjälp?

Om du behöver hjälp med Peavey SP 218P ställ en fråga nedan och andra användare kommer att svara dig




högtalare Peavey Manualer

högtalare Manualer

Nyaste högtalare Manualer