Perlick 4073-10QC-PO-SS Bruksanvisning
Perlick
Vattendispenser
4073-10QC-PO-SS
Läs nedan 📖 manual på svenska för Perlick 4073-10QC-PO-SS (7 sidor) i kategorin Vattendispenser. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/7
8 Faucet
H-Pipe Tower
Installation Instructions
Avenue T-Pipe and H-Pipe Towers
Form No. Z2609
Rev. 10.25.22
4 Faucet
T-Pipe Tower
Printed in USA 2
Avenue T-Pipe and H-Pipe Tower Installation Instructions
Installation of T-Pipe and H-Pipe Towers
Parts Bag Included with Tower:
Preparing for Installation:
Black Poly-tape Clear poly-tape Spanner wrench
Parts bag contents include –
Included with Tower:
T-Pipe Tower (L) or H-Pipe Tower (R)
(Faucets and tap handles shown are
not included)
Other Parts Needed for Installation: The parts required will vary depending on the installation.
PART NO. DESCRIPTION
63486 Coolant Line Connector Kit
C33037 Clamp, SS - Stepless
1. The towers are shipped with the Mounting
hardware installed, which includes two at
Mounting Plates (hockey stick shaped), two Hold
Down Brackets (U channel shaped), and two Hex
Nuts.
2. Remove the two Hex Nuts and all brackets.
Hold Down Bracket Hex Nut Mounting Plate
(Figure 1)
3 Printed in USA
Avenue T-Pipe and H-Pipe Tower Installation Instructions
1. Drill one (1) 3.5” diameter hole per base.
Position tower centered over hole.
Do not drill extra holes for threaded Note:
rods and trunk housing. (See )Figure 2a
( View from underneath)Figure 2:
2. Install mounting plates.
Note: If underside of countertop is steel, skip to step 3
(Figure 3: View from underneath)
3. Install support brackets.
Note: Support brackets must be used in all
installations of tower. (See )Figure 4a
(Figure 4: View from underneath)
4. Install nuts.
Note: Interlock mounting plates before tightening the nuts. After hand tightening
the nuts with the mounting plates ush and interlocked, tighten nuts between one
and one and-a-half turns with wrench.
(Figure 5: View from underneath)
5. After tightening the nuts on the bottom side, make sure tower is securely
fastened by pushing and pulling on the outermost faucet like an aggressive bar
tender may push or pull.
Note: Depending on bar top material, sealant may be required.
(Figure 6: View from top - protective shipping material still on the tower)
(Figure 2)
(Figure 3)
(Figure 4)
(Figure 5)
(Figure 6)
Mounting Plate
Support Bracket
Do not mount without support brackets
(Figure 2a)
YES NO
3.5” hole
(Figure 4a)
Produktspecifikationer
| Varumärke: | Perlick |
| Kategori: | Vattendispenser |
| Modell: | 4073-10QC-PO-SS |
Behöver du hjälp?
Om du behöver hjälp med Perlick 4073-10QC-PO-SS ställ en fråga nedan och andra användare kommer att svara dig
Vattendispenser Perlick Manualer
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
Vattendispenser Manualer
- Vattendispenser Philips
- Vattendispenser Panasonic
- Vattendispenser Honeywell
- Vattendispenser Bartscher
- Vattendispenser Orbegozo
- Vattendispenser Princess
- Vattendispenser Hitachi
- Vattendispenser Korona
- Vattendispenser Hoover
- Vattendispenser Breville
- Vattendispenser Waring Commercial
- Vattendispenser Avanti
- Vattendispenser Westinghouse
- Vattendispenser Midea
- Vattendispenser Avalon
- Vattendispenser Igloo
- Vattendispenser Elba
- Vattendispenser Nutrichef
- Vattendispenser Oasis
- Vattendispenser Bunn
- Vattendispenser Franke
- Vattendispenser Elkay
- Vattendispenser Caso
- Vattendispenser NewAir
- Vattendispenser Fetco
- Vattendispenser SPT
- Vattendispenser Crathco
- Vattendispenser Waterdrop
- Vattendispenser Hiberg
- Vattendispenser Primo Water
- Vattendispenser Brentwood
- Vattendispenser Healthy Choice
- Vattendispenser SodaKING
- Vattendispenser BIBO
- Vattendispenser Imarflex
Nyaste Vattendispenser Manualer
15 Oktober 2024
1 Oktober 2024
26 September 2024
26 September 2024
26 September 2024
26 September 2024
26 September 2024
26 September 2024
26 September 2024
26 September 2024