Pioneer CP-7EX Bruksanvisning

Pioneer högtalarstöd CP-7EX

Läs nedan 📖 manual på svenska för Pioneer CP-7EX (40 sidor) i kategorin högtalarstöd. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/40
CP-7EX
Speaker Stand / Socle d’enceinte / Lautsprecherständer /
Base per diffusori / Luidsprekerstandaard / Soportes de altavoz /
Suporte para colunas / Högtalarstativ / Højttalerstativ /
Høyttalerstativ / Kaiutinjalusta / Стойка под динамик
2
En
Thank you for buying this Pioneer product. This speaker
stand should only be used with the S-7EX Pioneer speaker
system. Please read through these operating instructions for
proper assembly and use. After you have finished reading the
instructions, put them away in a safe place for future
reference.
Before you start
Before setting up your speaker system, we recommend
reading the operating instructions for your system thor-
oughly.
• Only use the screws supplied when fixing the speaker to
the speaker stand.
• Do not place the stand on an unstable and/or sloping
surface. The stand and speaker may fall and cause
injury.
• Do not use with any speaker system other than the one
for which the unit was designed. The stand may collapse
and be damaged and/or the speaker may fall and cause
injury.
• When moving the speaker and stand, first remove the
speaker from the stand, and then move the stand,
holding it by the two stems.
Installing the speaker stands
Place the stand on a stable, level surface; placing the stand
on an unstable surface can be dangerous.
Adjust the position as necessary to obtain optimal sound
from your system.
• Pioneer assumes no liability whatsoever for damages
resulting from assembly, improper mounting, insuffi-
cient reinforcement, misuse of the product, acts of
nature, etc.
Assembling the speaker stands
Assemble the speaker stands as illustrated below. Please
note that a flathead screwdriver will be necessary for
assembly. The following illustration shows the fully assem-
bled speaker stand:
Speaker support
Stand base
Stand stems
Screw slots
for securing
speaker
• Align the screw slots on the stand base and screw
holes on the speaker support with the screw holes in
the two stems, then insert the screws and tighten.
The screw slots allow you to fine-tune the positioning of the
speaker.
55 mm
Black
(SBA6054)
40 mm
Black
Please note that sunken
screw holes are provided
in the speaker support.
(SBA6051)
Screws (Bind head, M6xL40)
Nut
Spike
(SBA6053)
Spike base
(SLA1057)
Screws (Bind head, M6xL55)
Speaker
support
Stand
base
Stand
stems
•Make sure you assemble the stand on a flat surface that
is relatively soft (such as a carpet).
•Make sure the screws are inserted in the screw holes as
shown above (with the screw head hidden) when
securing the speaker. Improper setup could result in
damage or injury if the speaker falls from the stand.
3
En
English
Using the spikes
The speaker stand includes spikes that you can use to isolate
the speaker from the floor. Spikes are recommended when
placing the stand on a thick carpet (for added stability), or for
better sound when placing the stand on a hard reverberant
surface (such as a concrete or wood floor). Use the supplied
spike bases to avoid scratching the floor or other surface
where the stand is placed.
1
2
Spike
Stand base plate
Nut
1 Attach the spikes to the nuts provided.
2 Attach all four spikes to the threaded metal inserts
at the base of the speaker stand.
3 Choose the location for speaker placement then put
the spike bases on the floor.
4 Place the stand so that the spikes are resting on the
spike bases on the floor.
Before placing the speaker on the speaker stand, make sure
the stand is stable and resting squarely on all four spikes.
•Note that these spikes are sharp metal and can cause
damage to flooring. Make sure to lay down a cloth or
suitable base before setting up.
•The spike bases should be placed as shown below (with
the depression on the top side).
•Make sure to use the spike bases provided to avoid
damaging the surface where you place the stand.
Attaching a speaker to the stand
To avoid accident or injury, please use screws to secure the
speaker to the speaker stand. Note that there are fastening
nuts provided on the speaker base (see below). Secure the
speaker to the speaker support using the washer, spring
washer and the 60 mm screws as shown below.
(SBA6058)
Speaker
base
Speaker
support
Washers (SBE6008)
Fastening nuts
Screws
(Bind head, M6xL60)
60 mm
Black
Spring washer
(SBE6007)
Screw slots
for securing
speaker
Cabinet and stand maintenance
•Use a polishing cloth or dry cloth to wipe off dust and
dirt.
•If the cabinet or stand is very dirty, use a soft cloth
dipped in some neutral cleanser diluted 5 or 6 times
with water. Finally, wipe again using a dry cloth. Do not
use furniture wax or cleaners.
•Never use thinners, benzine, insecticide sprays and
other chemicals on or near the cabinet or stand, since
these will corrode the surfaces.

Produktspecifikationer

Varumärke: Pioneer
Kategori: högtalarstöd
Modell: CP-7EX

Behöver du hjälp?

Om du behöver hjälp med Pioneer CP-7EX ställ en fråga nedan och andra användare kommer att svara dig


högtalarstöd Pioneer Manualer

Pioneer

Pioneer CP-4EX Bruksanvisning

4 Oktober 2024
Pioneer

Pioneer CP-7EX Bruksanvisning

22 Augusti 2024
Pioneer

Pioneer CP-F150 Bruksanvisning

19 Augusti 2024

högtalarstöd Manualer

Nyaste högtalarstöd Manualer

Sonorous

Sonorous SP 600 Bruksanvisning

27 Februari 2025
Axis

Axis TC1601 Bruksanvisning

20 Februari 2025
SoundTube

SoundTube SM1290 Bruksanvisning

20 Februari 2025
Nubert

Nubert BS-652 Bruksanvisning

6 Februari 2025
Nubert

Nubert BS-1002 Bruksanvisning

5 Februari 2025
Sonos

Sonos Arc Ultra Wall Mount Bruksanvisning

15 Januari 2025
NeoMounts

NeoMounts NS-SHELF100 Bruksanvisning

14 Januari 2025
Omnitronic

Omnitronic STS-1 Bruksanvisning

1 Januari 2025
Omnitronic

Omnitronic EUMO-2 Bruksanvisning

1 Januari 2025
Konig & Meyer

Konig & Meyer 24496 Bruksanvisning

31 December 2025