Presto SaladShooter 02910 Bruksanvisning

Presto Matberedare SaladShooter 02910

Läs nedan 📖 manual på svenska för Presto SaladShooter 02910 (6 sidor) i kategorin Matberedare. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/6
INSTRUCTIONS
Visit www.GoPresto.com
©2021 National Presto Industries, Inc.
Form 72-685D
SaladShooter®
electric slicer/shredder
• Slices or shreds fruits and vegetables. Shred
cheese for tacos, pizza and more.
• Just point and shoot right where you want.
• Cleanup is easy. Stores anywhere.
Estas instrucciones están disponibles en español.
Para obtener una copia impresa:
• Descargue en formato PDF en www.GoPresto.com/español.
• Envíe un correo electrónico a contact@GoPresto.com.
• Llame al 1-800-877-0441, oprima 2 y deje un mensaje.
This is a Listed appliance. The following important safeguards are recommended by most portable appliance manufacturers.
IMPORTANT SAFEGUARDS
To reduce the risk of personal injury or property damage, when using electrical appliances, basic safety precautions should always be
followed, including the following:
1. Read all instructions before using the slicer/shredder.
2. To protect against the risk of electrical shock, never put the motorized base, cord, or plug in water or other liquids.
3. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety. Close supervision is necessary when any appliance is used by or near children. Children should be su-
pervised to ensure that they do not play with the appliance.
4. Turn the appliance OFF, then unplug from the outlet when not in use, before assembling or disassembling parts, and before cleaning.
To unplug, grasp the plug and pull from the outlet. Never pull from the power cord.
5. Do not operate any appliance with a damaged cord or plug or in the event the appliance malfunctions or is dropped or damaged
in any manner. Return the appliance to the Presto Factory Service Department for examination, repair, or electrical or mechanical
adjustment.
6. The use of accessory attachments not recommended or sold by the appliance manufacturer may cause fire, electric shock, or injury.
Use only genuine Presto® accessory attachments and replacement parts.
7. Do not use outdoors.
8. Do not let cord hang over edge of table or counter or touch hot surfaces.
9. Avoid contact with moving parts.
10. Never feed the food through the food chamber with your hands; always use the food guide.
11. Keep fingers out of the slicing/shredding chute.
12. The metal portions of the slicing and shredding cones are sharp. Handle with care.
13. Do not use the slicer/shredder for other than intended use.
SAVE THESE INSTRUCTIONS
THIS APPLIANCE IS FOR HOUSEHOLD USE ONLY.
2
Important Cord and Plug Information
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit
into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to modify the plug in any way.
Connect the power supply cord to a 120VAC electrical outlet only.
Getting Acquainted
Before using your Presto® SaladShooter® electric
slicer/shredder, study the diagram to the right to
become familiar with the various parts of the unit
and read the instructions carefully. Before initial
use, and after each subsequent use, wash all parts
except the motorized base in warm, soapy water.
Wipe the motorized base with a damp cloth to
clean. Never immerse the motorized base in
water or any other liquid.
How to Use
1. Select either the slicing or the shredding cone
and insert it narrow end first (Fig. A) into
the slicing/shredding chute. Then attach the
twist-lock ring to the slicing/shredding chute
by turning it clockwise until it locks into place
(Fig. B). CAUTION! The metal portions of the
slicing and shredding cones are sharp. Handle
with care.
2. Attach the food chamber assembly to the mo-
torized base by inserting the portion contain-
ing the driving end of the slicing or shredding
cone into the socket of the motorized base
(Fig. C).
Then rotate the food chamber assembly clock-
wise until it is upright and centered with the
handle. To be sure the food chamber assembly
is attached properly, check to see that the
interlock bracket (Fig. D) is positioned in the
bracket slot (Fig. E).
Proper assembly is important. This unit is
designed with safety in mind. The food cham-
ber assembly cannot be removed from the base unless the power switch is
in the OFF position.
Likewise, the motor will not turn on unless the assembly is attached to the
unit. The motor stops automatically if an incorrectly attached assembly
slips off the base during operation.
Should the motor stop in the middle of operation, turn the switch to the OFF
position. Reassemble, making sure the interlock bracket on the bottom of
the slicing/shredding chute is positioned in the bracket slot on the motorized
base before using the unit again.
3. For best slicing and shredding results, it is important that the food be prepared properly and placed in the food chamber as follows:
• Cut food so that it will fit easily and loosely into the food chamber. Food that does not fit loosely in the food chamber may become
wedged in the food chamber and therefore will not discharge properly. If food is too large to fit loosely in the food chamber, cut
it into smaller pieces.
Food chamber
Fingertip
power
switch
Motorized base
Food guide
Slicing/
shredding chute
Shredding
cone
Twist-lock ring
Slicing cone
Driving end
Food chamber assembly
Fig. B
Food
chamber
Twist-lock
ring
Fig. A
Slicing/
shredding chute
Food
chamber
Fig. C
Bracket
slot
Socket
Driving
end
Bracket
slot
Interlock
bracket
Fig. D Fig. E
3
• Stack food into the food chamber upright for short slices or horizontally for longer slices (Fig. F).
• Push food through the food chamber using an even pressure on the food guide.
4. Plug the cord into a 120VAC electrical outlet only. Begin slicing or shredding. Use the power switch
to turn the unit on and off. The sliced or shredded food will be discharged from the open end of the
slicing/shredding chute.
CAUTION! To avoid personal injury, never use your hands to push food through the food chamber.
Always use the food guide and always keep your hands away from the slicing/shredding chute when
operating the unit.
Helpful Hints
♦All food slices and shreds better when it is fresh and firm.
♦Semi-soft cheeses should be refrigerated overnight or placed in the freezer approximately 30 min-
utes before shredding. Hard cheeses should be at room temperature. All unprocessed cheeses can be
shredded successfully with this unit. It is not recommended that you use soft or processed cheese
as it may clog the unit.
♦Use light pressure on the food guide for thinner slices and shreds, and firm pressure for thicker slices
and shreds.
♦Certain soft fruits, such as strawberries and kiwi, should be firm, not overripe, to slice. These types of fruits can also be placed in a
freezer for a few minutes before slicing. Certain fruits with tough skins, such as apples, should be peeled before slicing or shredding.
♦Some foods can be double processed. For instance, you can shred carrots and run them through again for grated carrots. Cheese can
be shredded twice for grated cheese.
♦Place food upright in the food chamber until it is full. Remember that food should fit easily and loosely into the food chamber and
should not extend above the top of the food chamber. Apply pressure evenly with the food guide.
Failure to properly load the food chamber or to apply even pressure may result in food falling over in the food chamber. If food falls
over in the chamber, slices and shreds may be uneven.
♦It is normal for bits of food remain on the top of the slicing or shredding cone after you have completed processing.
♦The unit is not designed to shred onions, slice cheese or chocolate, or process meats and tomatoes.
♦To avoid personal injury or damage to the unit, do not attempt to slice foods that are too hard to be cut with an ordinary knife.
NOTICE: This slicer/shredder was not designed to chop ice or grind coffee beans. You may damage the unit.
Questions & Answers
Occasionally my slicer/shredder will not turn on, or the fingertip power switch works intermittently. Why is this?
Most likely the food chamber assembly is not attached properly to the base. The power switch is designed
to work only when the food chamber assembly is centered with the handle on the motorized base.
Should the power switch operate intermittently, either the ON-OFF latch on the base is not positioned
directly between the two tabs on the food chamber (Fig. G) or the interlock bracket on the bottom of
the slicing/shredding chute (Fig. D, page 2) is not positioned in the bracket slot on the motorized base
(Fig E, page 2). Check the position of the food chamber assembly. Realign it so it is centered properly.
Sometimes I have trouble disengaging the food chamber assembly from the motorized base. What
am I doing wrong?
You probably forgot to turn the unit off. The unit is designed with a safety feature which prevents the food chamber assembly from being
removed when the power switch is in the ON position.
How come I sometimes have to use a lot of pressure to get food out of the slicing/shredding chute or no food comes out at all?
Any of the following may be occurring:
1. You have packed the food chamber too tightly. Foods should fit loosely in the food chamber. Leafy vegetables, such as cabbage and
lettuce, should be cut into chunks the size of the food chamber.
2. The food is not fresh and firm. All food slices and shreds better when it is fresh and firm.
3. Pieces of the food being processed may have wrapped around the slicing or shredding cone during processing or may have become
wedged in the cone. This would prevent food from coming out. If this occurs, simply disconnect the unit from the outlet, remove the
slicing or shredding cone, and clean out the buildup of food.
Food chamber
Tabs
ON-OFF
latch
Motorized
base
Fig. G
Fig. F
Stack food horizontally
for longer slices.
Stack food upright
for short slices.

Produktspecifikationer

Varumärke: Presto
Kategori: Matberedare
Modell: SaladShooter 02910

Behöver du hjälp?

Om du behöver hjälp med Presto SaladShooter 02910 ställ en fråga nedan och andra användare kommer att svara dig


Matberedare Presto Manualer

Presto

Presto SaladShooter 02910 Bruksanvisning

21 Augusti 2024

Matberedare Manualer

Nyaste Matberedare Manualer

Create

Create CHEF CHOP Bruksanvisning

15 Januari 2025
Bredeco

Bredeco BCPM-1200-EXP Bruksanvisning

15 Januari 2025
Bredeco

Bredeco BCPM-1200R Bruksanvisning

15 Januari 2025
Breville

Breville Kinetix Wizz BFP450 Bruksanvisning

14 Januari 2025
Gorenje

Gorenje S450XE Bruksanvisning

13 Januari 2025
Turbotronic

Turbotronic Samurai TT-MG10 Bruksanvisning

9 Januari 2025
Turbotronic

Turbotronic Samurai TT-MG20 Bruksanvisning

9 Januari 2025
Morphy Richards

Morphy Richards Mixstar Mixer Bruksanvisning

9 Januari 2025
Breville

Breville The Mix & Store Turbo LHM200 Bruksanvisning

9 Januari 2025
Clatronic

Clatronic KM 3350 Bruksanvisning

8 Januari 2025