Projecta IDC25 Bruksanvisning

Projecta Batteriladdare IDC25

Läs nedan 📖 manual på svenska för Projecta IDC25 (16 sidor) i kategorin Batteriladdare. Denna guide var användbar för 14 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/16
25 Amp, 3 Stage Switchmode
INTELLI-CHARGE
DC/SOLAR BATTERY CHARGER
P/No. IDC25
2
WARNINGS
• Explosive gases may escape from the battery during charging.
Prevent flames and sparks and provide adequate ventilation.
• Before charging, read the instructions.
• FOR CHARGING 12 VOLT LEAD ACID BATTERIES ONLY.
• Do not attempt to charge non-rechargeable batteries.
• Never charge a frozen battery.
• Corrosive substances may escape from the battery during charging and damage
delicate surfaces. Store and charge in a suitable area.
• This appliance is not intended for use by young children or infirm persons unless they
have been adequately supervised by a responsible person to ensure that they can use
the appliance safely.
• Young children should be supervised to ensure that they do not play with the
appliance.
• Fit fuses as close to the batteries as possible to protect the cable in case of
short circuit.
FEATURES
The IDC25 DC-DC charger is purposely designed for charging auxiliary batteries.
It includes all the features needed to maintain the auxiliary battery to its optimum
condition and to prolong the battery life.
SWITCHMODE TECHNOLOGY
The IDC25 converts your vehicle’s 12VDC/24VDC alternator power to the voltage
level allowing your batteries to be fully charged, prolonging battery life and
reliability. With the latest synchronous switching technology, efficiency of IDC25
exceeds 94% at typical full load condition.
DUAL INPUT OPERATION
Allows two energy sources to power the IDC25 simultaneously. Solar input takes
precedence if solar and alternator inputs are present. When solar input cannot provide
enough energy to the load, the IDC25 will draw power from solar and alternator
simultaneously.
SOLAR MPPT
The IDC25 utilises sophisticated MPPT (Maximum Power Point Tracking) solar
regulator technology. MPPT maximises the power generated from the solar panels
to the auxiliary battery.
3
SUPERIOR 3 STAGE CHARGING
Using high speed microcontroller and proprietary charging algorithm, the IDC25
delivers a sophisticated 3 stage charging process resulting in a faster and more
powerful charge, ideal for deep cycle batteries. The first stage, bulk (constant current),
charges the battery faster while the second stage, absorption (constant voltage),
ensures the battery is thoroughly charged. The final stage, float, maintains the battery
at a safe voltage allowing it to be maintained and ready for use indefinitely.
MULTI-CHEMISTRY SUPPORT
The IDC25 supports GEL, AGM, WET and CALCIUM batteries. If the calcium battery
mode is selected, periodic equalisation will be provided to the calcium battery for
removing acid stratification.
IGNITION CONNECTION
The IDC25 can be wired to the vehicle’s ignition allowing it to operate only when
the ignition is turned on. The ignition connection also activates the lower input
voltage operation to suit vehicles with smart (variable voltage) alternators.
TEMPERATURE COMPENSATION
The IDC25 is supplied with a 2 metre temperature sensor. The sensor monitors the
battery temperature and adjusts (compensates) the charger’s output to prevent
overcharging. This is ideal for batteries used in warmer climates or environments.
REMOTE CHARGER STATUS INDICATION
A pink wire is provided for driving an external panel mount LED indicator (Eg Narva
P/No. 62090BL) to show the status of the charger. It shows whether the auxiliary
battery is on charge (Solid Colour) or the charger is in a fault condition (Flashing).
PROTECTIVE FEATURES
Spark-Free Protection
The IDC25 will not start charging the battery (no output) unless the load is securely
connected. It prevents the output leads from sparking due to accidental short circuit
making the charger safer to use around batteries.
Reverse Connection Protection
Reverse connection on input and output terminals does not damage IDC25 internal
circuit. The IDC25 detects reverse connection condition and indicates whether input
or output connection is reversed.
Over and Under Voltage Protection
The charger will automatically shut down if there is an over voltage or under
voltage problem.
Over Temperature Protection
The charger will lower its output current if the temperature of the unit begins to
overheat.

Produktspecifikationer

Varumärke: Projecta
Kategori: Batteriladdare
Modell: IDC25

Behöver du hjälp?

Om du behöver hjälp med Projecta IDC25 ställ en fråga nedan och andra användare kommer att svara dig


Batteriladdare Projecta Manualer

Projecta

Projecta IC2500W Bruksanvisning

16 September 2024
Projecta

Projecta BLT700 Bruksanvisning

13 September 2024
Projecta

Projecta HDBM4000 Bruksanvisning

5 September 2024
Projecta

Projecta PC2100 Bruksanvisning

2 September 2024
Projecta

Projecta IC2500 Bruksanvisning

20 Augusti 2024
Projecta

Projecta BLT300 Bruksanvisning

8 Augusti 2024
Projecta

Projecta IC2500L Bruksanvisning

3 Augusti 2024
Projecta

Projecta IDC25 Bruksanvisning

1 Augusti 2024

Batteriladdare Manualer

Nyaste Batteriladdare Manualer

Fuxtec

Fuxtec FX-E1LG1A Bruksanvisning

13 Januari 2025
Voltcraft

Voltcraft Charge Manager 410 Bruksanvisning

7 Januari 2025
Envivo

Envivo ENV-1597 Bruksanvisning

7 Januari 2025
Jackery

Jackery Explorer 240 v2 Bruksanvisning

7 Januari 2025
Jackery

Jackery Explorer 1000 v2 Bruksanvisning

7 Januari 2025
Schwaiger

Schwaiger LSET500 513 Bruksanvisning

7 Januari 2025
Schwaiger

Schwaiger QLS10S 513 Bruksanvisning

7 Januari 2025
Mean Well

Mean Well NPB-1200-24 Bruksanvisning

6 Januari 2025
Ryobi

Ryobi PCG719 Bruksanvisning

6 Januari 2025
Envertec

Envertec EVT600 Bruksanvisning

6 Januari 2025