Renusol ConSole Bruksanvisning

Renusol Diverse klimatkontroll ConSole

Läs nedan 📖 manual på svenska för Renusol ConSole (8 sidor) i kategorin Diverse klimatkontroll. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/8

ConSole Installation instructions

2 — Renusol ConSole · EN · 04/2011

INSERTION

Product Information

The ConSole assembly system is the ideal solution for installing PV modules

on flat roofs with pitch of up to 5° without roof penetration. Most commercially

available framed standard PV modules fit on the ConSole.

The ConSole is weighed down with ballast (gravel, paving slabs, etc.) in order to

resist the wind loads. The necessary weight of the ballast depends on the height

of the building, its location and condition of the ground and the wind and snow

loads. Reference values for the necessary ballast are contained in "Preparing the

assembly – point 2." in the table on page 5 above.

The ConSole is made from 100% recycled chlorine-free polyethylene (HDPE).

The material of the ConSole satisfies the fire prevention measures of DIN 4102

class B2. The energy amortization time of the ConSole is shorter than one year.

A ConSole weighs 5 −7.2 kg depending on the type and can be stacked with up

to 40 ConSoles per pallet. The circular assembly edge will facilitate a fast

installation. Generously sized ventilation channels ensure efficient air circulation.

The boreholes on the ground of the ConSole are conducive for drainage.

We wish to point out that work must be carried out according to current safety

regulations (e.g., VBG37) in order to prevent accidents. Please carry out the

respective safety measures.

Warranty

Our warranty only applies if an original ConSole complete system is used.

In order to adjust the system optimally for the local conditions and to fulfil all

applicable regulations, we recommend an expert report be prepared if in any

doubt. The installation should be carried out by skilled and trained personnel.

If you have questions concerning training, please contact Renusol.

Installation instruction

Please read these installation instructions carefully before starting installation.

First, familiarize yourself with the system components. The ConSole can be

stored and used at temperatures of between -30° C and +50° C. We recommend

the ConSoles be assembled at plus temperatures. The roof area must in any case

be free of snow and ice.

During the installation and, in particular, while working on the roof, be sure to

observe the relevant health and safety provisions and please follow the current

rules and regulations.

Please also check the current version of our installation instructions on our

website at www.renusol.com. Here, you can also find instructions in other

languages, if required. The figures and texts in the installation instructions

correspond to current technology at the time of printing. We reserve the right

to make changes.

The installation instructions merely contain recommendations in accordance

with current technology and are based on the experience of how systems made

by Renusol can be installed. If any roof or object-specific characteristics are to be

considered, please, if necessary, involve specialists such as roofers or structural

engineers for the purposes of explanation.

The Renusol team wishes you a successful installation.

Renusol ConSole · EN · 04/2011 — 3

A ConSole

B U profiles of aluminium

C PV module

D Generously sized

Ventilation channels

E Boreholes for draining

the ConSole

F Circular assembly edge

SYSTEM OVERVIEW

SYSTEM OVERVIEW OF COMPONENTS

TOOLS REQUIRED (not included in delivery)

8 hexagonal

screws

M6 x 20 mm,

stainless steel

OPTIONAL EXTENSION RAILS

ConSole set of extension rails

consisting of:

– 2 ConSole extension rails, aluminium

– 4 hexagonal screws M6 x 20 mm, stainless steel

– 4 washers, stainless steel

– 4 self-locking hexagon nuts M6,

stainless steel

8 Self-locking

hexagon nuts M6,

stainless steel

8 washers,

stainless steel

– Cordless screwdriver with hexagonal insert

for 10-mm screw

– 7-mm drill

– 10-mm open end or ring spanner

150

A ConSole B 2 U profiles,

aluminium

Produktspecifikationer

Varumärke:	Renusol
Kategori:	Diverse klimatkontroll
Modell:	ConSole
Färg på produkten:	Wit
Bredd:	77 mm
Djup:	233 mm
Höjd:	35 mm
Processormodel:	Realtek RTL8881AN
Wi-Fi-standarder:	802.11a, Wi-Fi 5 (802.11ac), Wi-Fi 4 (802.11n)
USB uttag:	Nee
Ethernet LAN:	Ja
Typ av strömkälla:	Power over Ethernet (PoE)
Antal Ethernet LAN (RJ-45)-portar:	1
Nätförsörjning:	17 W
Typ processor:	Ja
SIM-kortplats:	Nee
3G/4G USB-modemkompatibilitet:	Nee
Modulation:	16-QAM, 64-QAM, BPSK, CCK, DBPSK, DBQSK, DSSS, OFDM, QPSK
WiFi-standard:	Wi-Fi 4 (802.11n)
WLAN-dataöverföringshastighet (max):	450 Mbit/s
Gränssnittstyp Ethernet LAN:	Fast Ethernet
Ethernet LAN, dataöverföringshastigheter:	10, 100 Mbit/s
Nätverksstandard:	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11n
Säkerhetsalgoritmer som stöds:	64-bit WEP, 128-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
Antennförstärkningsnivå (max):	10 dBi
3G:	Nee
4G:	Nee
Förvaringstemperatur:	-40 - 70 °C
Förvaringsfuktighet:	5 - 90 procent
MAC-adressfiltrering:	Ja
Filtrering:	Ja
Ethernet WAN:	Ja
Brandvägg:	Ja
IP-adressfilter:	Ja
DoS-attackförebyggande:	Ja
2,4 GHz:	Ja
5 GHz:	Ja
Power over Ethernet (PoE):	Ja
URL-filtrering:	Ja
Drifttemperatur (TT):	0 - 40 °C
Relativ luftfuktighet i drift (VV):	10 - 90 procent
Typ produkt:	Draagbare router
Antenndesign:	Intern
Stateful Packet Inspection (SPI):	Ja