Rikon 23-400H Bruksanvisning

Rikon Hyvlare 23-400H

Läs nedan 📖 manual på svenska för Rikon 23-400H (28 sidor) i kategorin Hyvlare. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/28

www.rikontools.com

23-400HM2

16” Thickness Planer

with Helical Cutterhead

Operator’s Manual

Record the serial number and date of purchase in your manual for future reference.

Serial Number: _________________________ Date of purchase: _________________________

For technical support or parts questions, email techsupport@rikontools.com or call toll free at (877)884-5167

4001824

23-400H

TABLE OF CONTENTS

SPECIFICATIONS

NOTE: The specications, photographs, drawings and information in this manual represent the current

model when the manual was prepared. Changes and improvements may be made at any time, with no

obligation on the part of Rikon Power Tools, Inc. to modify previously delivered units. Reasonable care

has been taken to ensure that the information in this manual is correct, to provide you with the guidelines

for the proper safety, assembly and operation of this machine.

This owner’s manual is not a teaching aid and is intended to show

assembly, adjustments, and general use.

Motor ....................................................................................................3 HP, TEFC

Motor Speed (no load).......................................................................... 3,400 RPM

Volts ............................................................................................................. 220 V

Amps, Hertz .........................................................................................12 A, 60 Hz

Cutterhead Diameter .................................................................... 2-3/4" (70 mm)

Cutterhead Speed (RPM / CPM)....................................5,100 RPM / 20,400 CPM

Number of Carbide Inserts, 4-sided.................................................................... 72

Maximum Depth of Cut ....................................................................... 1/8" (3 mm)

Maximum Cutting Width ....................................................................16" (406 mm)

Maximum Cutting Depth (Height) ............................................ 8-13/16” (225 mm)

Feed Speed SF/min ........................................................ 16 to 23 (5 to 7 SM/min)

Dust Port ...................................................................... 4-3/4” Diameter (120 mm)

Dust Collection Minimum CFM ........................................................................ 650

Noise Level (no load) .................................................................................. ≤85dB

Overall Size (LxWxH)...................55” x 24-1/4” x 42-1/2” (1400 x 616 x 1080 mm)

Base Size ...........................................................24-5/8” x 22-1/4” (627 x 565 mm)

Net Weight ....................................................................................375 lbs (170 kg)

Specifications.....................................................................................................................2

Safety Instructions ........................................................................................................3 - 6

Getting To Know Your Machine .........................................................................................7

Contents of Package ....................................................................................................7 - 8

Assembly .....................................................................................................................8 - 9

Operation ...................................................................................................................10 - 11

Adjustments ...............................................................................................................12 - 16

Maintenance ....................................................................................................................17

Wiring Diagram ................................................................................................................17

Troubleshooting ............................................................................................................18

Parts Diagrams & Parts Lists .................................................................................. 19 - 25

Warranty ..........................................................................................................................26

Accessories ................................................................................................................ 27

Notes ...............................................................................................................................27

SAFETY SYMBOLS

IMPORTANT! Safety is the single most important consideration in the operation of this equipment. The following

instructions must be followed at all times. Failure to follow all instructions listed below may result in electric shock,

re, and/or serious personal injury.

There are certain applications for which this tool was designed. We strongly recommend that this tool not be modied

and/or used for any other application other than that for which it was designed. If you have any questions about its

application, do not use the tool until you have contacted us and we have advised you.

SAFETY INSTRUCTIONS

GENERAL SAFETY

KNOW YOUR POWER TOOL. Read the owner’s manual

carefully. Learn the tool’s applications, work capabilities,

and its specic potential hazards.

BEFORE USING YOUR MACHINE

To avoid serious injury and damage to the tool, read and

follow all of the Safety and Operating Instructions before

operating the machine.

1. Some dust created by using power tools contains

chemicals known to the State of California to cause cancer,

birth defects, or other reproductive harm.

Some examples of these chemicals are:

• Lead from lead-based paints.

• Crystalline silica from bricks, cement, and other

• masonry products.

• Arsenic and chromium from

chemically treated lumber.

Your risk from these exposures varies, depending on how

often you do this type of work. To reduce your exposure to

these chemicals: work in a well ventilated area and work

with approved safety equipment, such as those dust masks

that are specially designed to lter out microscopic

particles.

2. the entire Owner’s Manual. how to use READ LEARN

the tool for its intended applications.

3. If the tool is supplied with a 3 GROUND ALL TOOLS.

prong plug, it must be plugged into a 3-contact electrical

receptacle. The 3rd prong is used to ground the tool and

provide protection against accidental electric shock. DO

NOT remove the 3rd prong. See Grounding Instructions

on the following pages.

4. AVOID A DANGEROUS WORKING ENVIRONMENT.

DO NOT use electrical tools in a damp environment or

expose them to rain.

5. use electrical tools in the presence of DO NOT

ammable liquids or gasses.

6. ALWAYS keep the work area clean, well lit, and

organized. work in an environment with oor DO NOT

surfaces that are slippery from debris, grease, and wax.

7. KEEP VISITORS AND CHILDREN AWAY. DO NOT

permit people to be in the immediate work area,

especially when the electrical tool is operating.

8. to perform an operation DO NOT FORCE THE TOOL

for which it was not designed. It will do a safer and

higher quality job by only performing operations for

which the tool was intended.

9. wear loose WEAR PROPER CLOTHING. DO NOT

clothing, gloves, neckties, or jewelry. These items can

get caught in the machine during operations and pull the

operator into the moving parts. The user must wear a

protective cover on their hair, if the hair is long, to

prevent it from contacting any moving parts.

10. CHILDPROOF THE WORKSHOP AREA by

removing switch keys, unplugging tools from the

electrical receptacles, and using padlocks.

11. ALWAYS UNPLUG THE TOOL FROM THE

ELECTRICAL RECEPTACLE when making adjust-

ments, changing parts or performing any maintenance.

SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, or CAUTION. This symbol may be used

in conjunction with other symbols or pictographs.

Indicates an imminently hazardous situation, which, if not avoided, could result in death or

serious injury.

Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious

injury.

Indicates a potentially hazardous situation, which, if not avoided, could result in minor or

moderate injury.

NOTICE: Shown without Safety Alert Symbol indicates a situation that may result in property damage.

Produktspecifikationer

Varumärke:	Rikon
Kategori:	Hyvlare
Modell:	23-400H
Färg på produkten:	Zwart
Inbyggd display:	Ja
Vikt:	125 g
Bredd:	63 mm
Djup:	17 mm
Höjd:	73 mm
Användarmanual:	Ja
Vormfaktor:	Bodypackzender
Batteri/Batterispänning:	2 V
Antal batterier/batterier som stöds:	2
Batteritid/batteritid:	5 uur
Inspänning:	3 V
Typ av antenn:	Verwijderbaar
Förvaringsväska:	Ja
siffra:	1
Signal-brusförhållande:	106 dB
Antal kanaler:	42 kanalen
Total harmonisk distorsion (THD):	1 procent
Drifttemperatur (TT):	0 - 50 °C
Type beeldscherm:	OLED
Batterityp:	AA
Frekvenssvarsmikrofon:	20 - 22000 Hz
Radiofrekvensområde:	638.125 - 697.875 MHz
Skriv arbetsfrekvens:	Ultrahoge frequentie (UHF)
RF-effekt:	50 mW
Dynamiskt omfång:	48 dB