RK Technology K3 Bruksanvisning

RK Technology Termometer K3

Läs nedan 📖 manual på svenska för RK Technology K3 (1 sidor) i kategorin Termometer. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/1
1.Introduction
Tripod mounting hole SwitchUSB interface
Double-sided adhesive area
Hanging hole
Nameplate
Mode switch hole
Infrared thermometer
Infrared ranging sensor
Temperature display
Alarm light
2.Specification
1. Accuracy: ±0.2 degrees 34 45 place it in the operating environment for 30 （ ～ ℃，
minutes before use）
2. Abnormal automatic alarm: flashing +“Di Di” sound
3. Automatic measurement: measuring distance 5cm ~ 10cm
4. Screen: Digital display
5. Charging method:USB charging or battery(18650 Li-ion).
6. Install method: nail hook, double-sided adhesive sticking, bracket fixing
7. Environment temperature: 10 ~40 Recommended 15 ~35℃ ℃（ ℃ ℃）
8. Infrared measuring range: 0 50～ ℃
9. Response time: 0.5s
10. Input: DC 5V
11. Weight: 250g
12. Dimensions: 170*115*140mm
13. Standby About one week：
14. Counting capacity: 999
3.Status Description
4.Operation Instruction
1. Standby: The red dot in the bottom of the display lights up in turn. (Fig. 1)
2. Insufficient power: The horizontal bar lights up in the middle of the display. (Fig. 2)
3. Normal temperature: Flashing green lights and alarm ‘Di’. (Fig. 3)
4. Abnormal temperature: Flashing red lights and alarm ‘Di Di’.(Fig. 4)
5. Default bod:object mode（ ）：
‘Lo’: Ultra-low temperature alarm. (Fig.5)
‘HI’ : Ultra-high temperature alarm.(Fig. 6)
1. Temperature measurement: Front of the thermometer and approach it within 5-10 cm.
(Fig. 7)
Fig. 1 Fig. 2 Fig. 3
Fig. 4 Fig. 5 Fig. 6
Fig. 7
5~10cm
2. Mode switching: There is a small hole on the back of the device (Fig. 8). You can use a
3mm diameter screwdriver to insert the hole and then press the button.
(1) Temperature unit: Press ‘mode switch hole’ then select ‘C’ or ‘F’ (Fig.9, 10) C: Celsius
F: Fahrenheit
(2) Mode: Long press mode switch hole for 3 seconds to switch the temperature
measurement mode (Sur: surface mode, bod: object mode, Cou: counting mode)
Fig. 8 Fig. 9 Fig. 10
Fig. 11 Fig. 12 Fig. 13
Infrared Thermometer User Guide
Model: K3
3.Install and replace battery
（ ）1 Remove three screws
（ ）2 Open the back base and install 18650 Li battery
4.Install method
1.Nail hook 3.Double-sided adhesive sticking2.Bracket fixing
+
-
1.It is the user's responsibility to ensure the electromagnetic compatibility environment of
the device so that the device can work normally.
2.It is recommended to evaluate the electromagnetic environment before using the device.
3.When changing the operating environment, the device must be left to stand for more than
30 minutes.
4.It is not recommended to use it outdoors or under strong light.
5.Keep away from air conditioners, fans, etc.
6.Please use qualified, safety-certified batteries, unqualified batteries or non-rechargeable
batteries used may cause fire or explosion.
7.If it cannot work after install the battery, please insert the charging cable to charge it and
it can be used normally.
5.Warnings
1.Surface mode: measuring the surface temperature of an object (any object).
2.Object Mode: measurement range is between 35 ~ 42 with alarm.℃ ℃
3.Counting mode: each measurement is incremented in order according to the
law of natural numbers.

Produktspecifikationer

Varumärke: RK Technology
Kategori: Termometer
Modell: K3

Behöver du hjälp?

Om du behöver hjälp med RK Technology K3 ställ en fråga nedan och andra användare kommer att svara dig


Termometer RK Technology Manualer

RK Technology

RK Technology K3 Bruksanvisning

27 Augusti 2024

Termometer Manualer

Nyaste Termometer Manualer

Topcom

Topcom EFT 301 - TH-4653 Bruksanvisning

15 Januari 2025
Topcom

Topcom TH-4651 Bruksanvisning

15 Januari 2025
AGM

AGM ASP TM25-640 Bruksanvisning

15 Januari 2025
AGM

AGM ASP TM35-384 Bruksanvisning

15 Januari 2025
AGM

AGM ASP TM25-384 Bruksanvisning

15 Januari 2025
AGM

AGM ASP-Micro TM384 Bruksanvisning

15 Januari 2025
AGM

AGM ASP TM35-640 Bruksanvisning

15 Januari 2025
AGM

AGM ASP-Micro TM160 Bruksanvisning

15 Januari 2025
AGM

AGM Taipan TM10-256 Bruksanvisning

15 Januari 2025
AGM

AGM Taipan TM25-384 Bruksanvisning

15 Januari 2025