SE Electronics DM1 Dynamite Bruksanvisning

SE Electronics mikrofon DM1 Dynamite

Läs nedan 📖 manual på svenska för SE Electronics DM1 Dynamite (6 sidor) i kategorin mikrofon. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/6
sE sElectronic
®
DM1
User Man ual
We would like to thank you cordially for choosing
this sE DM1! We hope you enjoy using it as much
as we enjoyed designing and building it for you.
The DM1 is an active inline preamp intended to
be inserted between a passive ribbon or dynamic
microphone and a microphone preamplier.
Providing a robust 28dB of gain, the DM1 is the
perfect way to boost the signal from a passive
mic, reduce the likelihood of interference, and
provide signicantly improved level to your
preamp – all without adding noise or coloration.
With a sophisticated class-A design and
specially-selected high-grade FETs, the DM1 has
the lowest self-noise in its class. Additionally, the
28dB of gain it provides is always a consistent
28dB regardless of the connected load, thanks
to its dedicated output buffer amplier. Its
output impedance is also the lowest in its class,
allowing it to drive long cable runs and reduce
the likelihood of RF interference, buzz and hum.
Reliable operation even in demanding on-
stage applications in dicult environments is
ensured by the roadworthy and slim all-metal
design, robust construction, and high-quality
manufacturing standards.
Note: the DM1 requires phantom power for
operation but with microphones does not work
than require phantom power, e.g. condenser
microphones or some active ribbon microphones.
Thank you!
This product conforms to the standards listed
in the Declaration of Conformity. Technical data
subject to change without notice.
Safety & Maintenance
To ensure proper operation, the DM1 requires
a phantom power source providing 48 Volts
according to IEC 61938.
Powering
Do not connect the DM1 to any
power supply other than a phantom
power source (input with phantom
power or external IEC standard
phantom power supply) with a
fl oating connector, using a balanced
cable with studio grade connectors
to IEC 268-12 only. This is the only
way to ensure safe and reliable
operation.
Risk of Damage
Please make sure that the pieces
of equipment to which your DM1
will be connected ful l the safety
regulations enforced in your country
and are  tted with a ground lead.
Risk of Damage

Produktspecifikationer

Varumärke: SE Electronics
Kategori: mikrofon
Modell: DM1 Dynamite

Behöver du hjälp?

Om du behöver hjälp med SE Electronics DM1 Dynamite ställ en fråga nedan och andra användare kommer att svara dig


mikrofon SE Electronics Manualer

SE Electronics

SE Electronics V7 BFG Bruksanvisning

25 September 2024
SE Electronics

SE Electronics V7 V3 Bruksanvisning

25 September 2024
SE Electronics

SE Electronics V2 Switch Bruksanvisning

21 September 2024
SE Electronics

SE Electronics T1 Bruksanvisning

20 September 2024
SE Electronics

SE Electronics DM2 TNT Bruksanvisning

20 September 2024
SE Electronics

SE Electronics sE4100 Bruksanvisning

20 September 2024
SE Electronics

SE Electronics V7 MC2 Bruksanvisning

19 September 2024
SE Electronics

SE Electronics V7 MC1 Bruksanvisning

19 September 2024
SE Electronics

SE Electronics VR2 Bruksanvisning

19 September 2024
SE Electronics

SE Electronics Harp Blaster HB52 Bruksanvisning

19 September 2024

mikrofon Manualer

Nyaste mikrofon Manualer

Vonyx

Vonyx CMS320B Bruksanvisning

16 Januari 2025
Karma

Karma SET 6252A Bruksanvisning

16 Januari 2025
DJI

DJI Mic Mini Bruksanvisning

15 Januari 2025
Sound Devices

Sound Devices Astral A20-HH Bruksanvisning

14 Januari 2025
HyperX

HyperX QuadCast S Bruksanvisning

8 Januari 2025
Monacor

Monacor ECM-306BU/SW Bruksanvisning

8 Januari 2025
Schertler

Schertler STAT-C Bruksanvisning

7 Januari 2025
Godox

Godox Cube-C Bruksanvisning

7 Januari 2025
Audibax

Audibax AWM 401 TD Bruksanvisning

6 Januari 2025
Audibax

Audibax Sidney 1250 A Bruksanvisning

6 Januari 2025