SE Electronics X1 S Bruksanvisning

SE Electronics mikrofon X1 S

Läs nedan 📖 manual på svenska för SE Electronics X1 S (23 sidor) i kategorin mikrofon. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/23
1
X1 S
U s e r M a n u a l
2
User Manual - EN
Thank you
We would like to thank you cordially for choosing this sE microphone! This manual contains some
important instructions for setting up and operating your new equipment. Please take a few
minutes to read the instructions below carefully. We hope you will enjoy working with it as much
as we enjoyed designing and building it for you.
Most Sincerely,
Your sE Team
Brief Description
The X1 S is a high-quality condenser microphone intended for a wide range of studio applications,
from vocals to drums to acoustic instruments and beyond. Thanks to its custom design and hand-
crafted 1” true condenser capsule, it delivers pristine sound quality and an even, well-balanced
frequency response.
The electronics and the switchable attenuation pads ensure a high dynamic range, with high
sound pressure level (SPL) handling capability and extremely low-noise components. The
switchable low cut filters eliminate rumble or footfall noise, and can also compensate for an
excess of bass frequencies caused by the proximity effect. This enables the X1 S to close-mic
many instruments including electric guitar speaker cabinets, brass instruments and drums.
Reliable operation even in demanding on-stage applications in difficult environments is ensured by
the roadworthy all-metal design, robust construction, and high quality manufacturing standards.
What’s in the box
Your packaging should contain the follow items. If anything is missing, please contact your sE
Electronics dealer and let them know.
X1 S microphone
microphone stand clip
thread adapt er
Controls
The X1 S features a switch for the attenuation pads and a switch for the low-cut filters.
Attenuation Switch
The is located on the front-left side of Attenuation Switch
the microphone. When switched on, the incoming signal is
reduced by either 10 or 20 dB for capturing of loud
instruments and/or close-miking without distortion. Using
the switch also helps prevent overloading the input stage of
recording interfaces, mixing desks and microphone
preamps.
3
Low-Cut Switch
The Low-Cut Switch is located on the front-right side of the
microphone, and inserts a low-cut filter at 80Hz (left
position) or 160Hz (right position). The switch’s center
position removes the filter for a flat frequency response.
Wind noise, plosives, footfall noise or rumble might affect
the recorded signal, so enabling the low-cut filters reduces
such unwanted noise and prevents distortion. Additionally,
the low-cut filters also minimize the proximity effect when
recording sound sources at a very short distance.
Powering
To ensure proper operation, the microphone requires a phantom power source providing 48 Volts
according to IEC 61938.
Risk of damage
Do not connect the microphone to any power supply other than a
phantom power source (input with phantom power or external IEC
standard phantom power supply) with a floating connector, using a
balanced cable with studio grade connectors to IEC 268-12 only. This
is the only way to ensure safe and reliable operation.
Safety and maintenance
Risk of damage
Please make sure that the piece of equipment to which your
microphone will be connected fulfils the safety regulations enforced in
your country and is fitted with a ground lead.
Cleaning the microphone
After every use, clean the microphone with a dry, soft cloth tissue and store it in a solid case or a
zipper pouch.
Technical Specifications
Capsule
Hand-crafted 1“ true condenser capsule
Polar patterns
Cardioid
Frequency range
20 20,000 Hz –
Sensitivity
30 mV/Pa (-30.5 dBV)
Max. SPL (0.5% THD)
140 / 150 / 160dBSPL(0/10/20 dB Attenuation pad)
Equivalent noise level
9 dB(A)
Dynamic range
131 / 141 / 151 dB (0/10/20 dB Attenuation pad)

Produktspecifikationer

Varumärke: SE Electronics
Kategori: mikrofon
Modell: X1 S

Behöver du hjälp?

Om du behöver hjälp med SE Electronics X1 S ställ en fråga nedan och andra användare kommer att svara dig


mikrofon SE Electronics Manualer

SE Electronics

SE Electronics V7 BFG Bruksanvisning

25 September 2024
SE Electronics

SE Electronics V7 V3 Bruksanvisning

25 September 2024
SE Electronics

SE Electronics V2 Switch Bruksanvisning

21 September 2024
SE Electronics

SE Electronics T1 Bruksanvisning

20 September 2024
SE Electronics

SE Electronics DM2 TNT Bruksanvisning

20 September 2024
SE Electronics

SE Electronics sE4100 Bruksanvisning

20 September 2024
SE Electronics

SE Electronics V7 MC2 Bruksanvisning

19 September 2024
SE Electronics

SE Electronics V7 MC1 Bruksanvisning

19 September 2024
SE Electronics

SE Electronics VR2 Bruksanvisning

19 September 2024
SE Electronics

SE Electronics Harp Blaster HB52 Bruksanvisning

19 September 2024

mikrofon Manualer

Nyaste mikrofon Manualer

Vonyx

Vonyx CMS320B Bruksanvisning

16 Januari 2025
Karma

Karma SET 6252A Bruksanvisning

16 Januari 2025
DJI

DJI Mic Mini Bruksanvisning

15 Januari 2025
Sound Devices

Sound Devices Astral A20-HH Bruksanvisning

14 Januari 2025
HyperX

HyperX QuadCast S Bruksanvisning

8 Januari 2025
Monacor

Monacor ECM-306BU/SW Bruksanvisning

8 Januari 2025
Schertler

Schertler STAT-C Bruksanvisning

7 Januari 2025
Godox

Godox Cube-C Bruksanvisning

7 Januari 2025
Audibax

Audibax AWM 401 TD Bruksanvisning

6 Januari 2025
Audibax

Audibax Sidney 1250 A Bruksanvisning

6 Januari 2025