Shelly TRV Bruksanvisning

Läs nedan 📖 manual på svenska för Shelly TRV (5 sidor) i kategorin Smarth hem. Denna guide var användbar för 13 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/5
HOW TO CONTROL PUMP OR
BOILER WITH MULTIPLE SHELLY TRV
DEVICES
It is often the case in many houses that the hot water pump or boiler has to be switched off
when all radiators and heating circuits are closed. This leads to additional energy savings.
When we have separate wireless devices in all rooms, they must work simultaneously by
sending a signal to the central heating system so that it can turn the pump on and off depending
on the condition of all of them.
Shelly TRV and Shelly1 for pump/boiler control
To make this decision, you need a ShellyTRV connected to each radiator and a Shelly1 or
ShellyPlus 1, which is connected to the central heating system, according to one of the
diagrams below.
How to set Shelly TRV to control Shelly1
Each Shelley TRV can execute HTTP commands to another device on two criteria.
1. When the Valve is fully closed - This action is performed once, each time the Shelley
TRV closes completely and stops the water to the radiator.
2. When the Valve is partially or fully open - This action is performed every 5 min
automatically when Shelly TRV is open at any percentage.
You can set these 2 actions to work through the local interface of the device or through the
Shelley Cloud app.
You need to find the IP address on the Shelly1 in your local network
To enable Valve Open and Valve Close Actions
Enter and Save in Valve Open Action: http://Shelly1-IP/relay/0?turn=on
Enter and Save in Valve Close Action: offhttp://Shelly1-IP/relay/0?turn=

Produktspecifikationer

Varumärke: Shelly
Kategori: Smarth hem
Modell: TRV

Behöver du hjälp?

Om du behöver hjälp med Shelly TRV ställ en fråga nedan och andra användare kommer att svara dig




Smarth hem Shelly Manualer

Smarth hem Manualer

Nyaste Smarth hem Manualer