SIIG CE-MT1B12-S1 Bruksanvisning

SIIG Wandstöd CE-MT1B12-S1

Läs nedan 📖 manual på svenska för SIIG CE-MT1B12-S1 (8 sidor) i kategorin Wandstöd. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/8
1
Articulating LCD/TV Monitor
Mount - 10" to 27"
Installation Guide
04-0922A
IMPORTANT: If you don't understand the installation
instructions, please consult an installation specialist.
2
Caution
Prior to installation of this product, the installation
instructions should be read and completely
understood. The installation instructions must be
read to prevent personal injury and property
damage. Keep these installation instructions in an
easily accessible location for future reference.
The maximum load capacity is 33lbs (15kg). Use
with products exceeding the maximum load capacity
may cause serious injury. See apparatus instructions.
Recommended mounting surfaces: wood stud and
solid-flat concrete. If the mount is to be installed on
any surface other than wood studs or solid concrete,
use suitable hardware (not included but
commercially available).
Do not install on a structure that is prone to vibration,
movement or chance of impact. Failure to do so
could result in damage to the display and/or
damage to the mounting surface.
Do not install near heater, fireplace, air conditioning,
in direct sunlight or any other heat producing source.
Failure to do so may result in damage to the display
and could increase the risk of fire.
The wall structure must be capable of supporting at
least five (5) times the maximum load capacity as
indicated. If not, the wall must be reinforced.
Proper installation procedure by yourself or a
qualified service technician, as outlined in the
installation instructions, must be adhered to. Failure
to do so could result in serious personal injury.
3
(x2) M6x60
bolt
(x2) M6
concrete anchor
(x4) M6
small washer
(x2) M6
large washer
(x4) M4x12
screw
(x4) M5x12
screw
(x4) M6x12
screw
Hardware Kit
A B
G
CD
EF
Tools Required: Electronic stud finder, #2 Phillips head
screw driver, drill, 1/8" drill bit (wood stud installation),
5/16" masonry drill bit (concrete/brick wall installation).
When mounting to a wall that contains wood studs,
confirm the dead center of the wood stud prior to
installation, it is recommended that the wood studs
be a minimum of 16" apart (if applicable).
It is recommended that two people perform the
installation. Injury and/or damage can result from
dropping or mishandling the display.

Produktspecifikationer

Varumärke: SIIG
Kategori: Wandstöd
Modell: CE-MT1B12-S1

Behöver du hjälp?

Om du behöver hjälp med SIIG CE-MT1B12-S1 ställ en fråga nedan och andra användare kommer att svara dig




Wandstöd SIIG Manualer

Wandstöd Manualer

Nyaste Wandstöd Manualer