Smartwares VD27 Bruksanvisning
Smartwares
Intercomsystem
VD27
Läs nedan 📖 manual på svenska för Smartwares VD27 (14 sidor) i kategorin Intercomsystem. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/14
Package & Accessories
Included Quantity Mark Remark
Indoor Monitor 1 A Indoor monitor with LCD screen
Screw 4 B Two pairs depending on thickness
of the door
Outdoor Camera 1 C The ribbon cable will go through
Peephole to connect Indoor Part
Steel Bracket 1 D Use scre racket w to fix the steel b
with Outdoor part
User Manual 1
Door
D. Steel Bracket
A. Indoor monitor
B. Fixing screws
Ribbon cable
Drill Hole in door
C. Outdoor camera
13-20mm 3x
Smart Peephole Viewer/
Visual Doorbell User Manual
You will need
Either remove your current door viewer or drill a new hole at least
13mm diameter up to 20mm diameter Into your door in a suitable position
to view the visitor.
N.B. Always test the product before installation.
Open the battery cover of the indoor monitor (A) and insert the Micro SD card.
Then insert 3x AA batteries making sure they are inserted correctly.
N.B. Please install the Micro-SD card before inserting the batteries.
Taking extra care with the ribbon cable gently push the indoor monitor
(A) back onto the steel bracket (D) and slide down to lock into position.
Insert your selected screws (B) according to your door thickness into
the Outdoor camera (C) but do not fully tighten.
Push the door viewer (C) into position making sure the ribbon cable
is pushed through first and the up arrow on the back of the camera
is facing up.
Connect the ribbon cable by pushing it onto the connection, you will feel
a “Click” as it locks onto the circuit board. Make sure the cable is fitted
the correct way around as shown in the image.
Using the steel bracket (D), make sure the up arrow is facing up and
push the ribbon Cable through the slot. Then allow the screws to push
through the holes so the steel bracket becomes flush with the door.
Tighten the screws to fix the steel bracket and Outdoor camera
into position.
Clip the battery cover back on, the ribbon cable will fit in a small opening
allowing it to come through the cover.
01 04
1 2 3
07
02 05
03 06
Technical Specifications
Conforms to all relevant European Directives.
Recycling
This symbol is known as the ‘Crossed-out Wheelie Bin Symbol’.
When this symbol is marked on a product or battery, it means that
it should not be disposed of with your general household waste.
Some chemicals contained within electrical/electronic products or
batteries can be harmful to health and the environment. Only dispose
of electrical/electronic/battery items in separate collection schemes,
which cater for the recovery and recycling of materials contained within.
Your co-operation is vital to ensure the success of these schemes and
for the protection of the environment
Indoor-part Dimension: 136×75×18mm
Outdoor-part Dimension: 30×30×7mm
Door hole range: 13mm~20mm
Door thickness range: 35mm~105mm
Battery: 3x AA batteries (Not included）
Battery life: 3 months (based on 10 operations per day)
Voltage: 4.5V~3.5V
Notes
We recommend that good quality, branded, alkaline batteries
are used.
Do not leave the product on uneven or unstable surfaces to prevent
damage caused by falling.
Try to avoid placing the product on high-temperature surfaces,
high humidity or a lot of dust, salt spray and other harsh environments
as this may reduce the lifespan of the product.
Take care with the ribbon cable on the door viewer to avoid damage.
Smartwares declares that the appliance, model [VD27], complies
with the main essential requirements of the R&TTE directive,
1999/5/CE. The complete declaration of conformity is available
on request at:
In more detail...
Installation
Time Date
Visitor Records
System Setting User Guide
Battery Indication Enter key
Right Key
Left Key
Smart Peephole Viewer/
Visual Doorbell User Manual
How to use
System Features
User Guide & Trouble Shooting
Safety Information
Main operation:
In order to operate the unit to view a visitor press the
Answer key (1) and the screen will display the camera
image. After 10 seconds of no activity the screen will
turn off. Should you want to record an image or video
of the visitor press the Answer key (1) to display the
camera and the Answer key (1) again to begin recording.
Menu settings:
For all menu options use the LEFT (2) & Right (3) keys
to scroll through the options and use the Menu/OK key
(4) to select any option. To exit the menus press the Answer
Key (1). Press the Menu/OK key (4) to enter the menu
screen (opposite):
View images / recordings:
Press the Menu/OK key (4) to enter recording menu. The date of recording will be displayed and press the Menu/OK key
(4) to enter the day and a list of stored images / recordings. Use the left (2) and right (3) keys to scroll through the list and
press the Menu/OK key (4) to display the image / recording.
To delete an image / recording:
Press the Menu/OK key (4) to enter recording menu. The date of recording will be displayed and press the Menu/OK
key (4) to enter the day and a list of stored images / recordings. Use the left (2) and right (3) keys to scroll through the
list and HOLD the Menu/OK key for 5 seconds and “Delete” will appear, press the Menu/OK button again to delete.
System settings:
Press the Right key (3) to highlight system setting and press the Menu/OK key (4). Use the Left (2) right (3) keys to scroll
through the menu using the Menu/OK key (4) to enter each section:
• Date & Time – Adjust the date and time that will show on images and recordings
• Language - Adjust the language of the device
• Recording mode – Select between images or recordings of the visitor
• LCD Brightness - Adjust the screen brightness (higher uses more battery power)
• Video Recording Time – Adjust the amount of time to record the visitor 3, 5 or 10 seconds
• Backlight time - Adjust how long to keep the screen on for 5, 10, 15 or 20 seconds
• Format Micro SD Card – Erase all data from the Micro SD Card
• Restore Factory settings - Restore the device to factory settings
IMPORTANT — RETAIN THIS INFOMATION R FO FUT E R REUR EFE NCE — READ CAR EFULLY
User Guide:
Press the Right key (3) to highlight User Guide and press the Menu/OK key (4) to Show the system information.
Troubleshooting:
Q. My unit does not power up / show anything on the screen when I press the buttons
A. Please check the batteries, make sure they are good quality and are inserted correctly.
Q. My unit randomly powers on/off
A. Please replace the batteries
Q. Unit displays “Insert Memory Card” when trying to take an image or recording
A. Make sure the Micro SD Card is inserted correctly, remove the batteries, remove and re insert the Micro SD
card and re insert the batteries
Q. Unit displays “Camera Module not Ready”
A. Make sure the ribbon cable is connected correctly to the Indoor monitor (See step 5 installation)
The ventilation should not be impeded by covering the
ventilation openings with items, such as newspapers,
tablecloths, curtains, etc...
DO NOT allow this product to come into direct contact
with heat or a naked flame.
The normal operation of the product may be disturbed
by strong electromagnetic interference.
This equipment is intended for domestic use only.
The appliance shall not be exposed to dripping or splashing.
No objects filled with liquids, such as vases, shall be
placed on the appliance.
Keep a minimum distance of 10 cm around the product
for sufficient ventilation.
Ensure the bell push is not mounted where it could become
immersed by water/rain.
DO NOT allow children to play with this appliance.
An adult must carry out battery replacement and installation.
Remove exhausted batteries from this product.
DO NOT dispose of batteries in a fire, batteries may
explode or leak.
DO NOT short-circuit the battery terminals.
DO NO mix used and new batteries.T
DO NO mix alkaline standard (carbon-zinc), lithium T
or rechargeable batteries.
DO NOT use rechargeable batteries in this product.
DO NOT recharge non-rechargeable batteries.
DO NOT allow any part to come in contact with heat
or a direct flame.
DO NOT allow water to come into contact with the
batteries or wiring.
Install carefully to prevent any damage to the batteries
When installing batteries in the battery compartments,
ensure the batteries are placed as marked (+)(-).
Only the recommended batteries should be used.
Remove batteries from product when not in use for long
periods of time.
Keep this product out of the reach of small children.
Store unused batteries in their original packaging.
Dispose of used batteries responsibly.
Safety
Battery Warnings
LCD
Camera
Answer Key Left Key Right Key Menu / OK Key
(1) (2) (3) (4)
S mme Deurspion/li
Gebrui nwijzing Visuele Deurbelksaa
Ver kking & A essoirespa cc
M l verdee ge
H v loe ee
heid
Lett
er
Opmerking
Bi nsc rmnne he
1
A.
Bi n LCD-sc rmnne he
Schroef
4
B
Tw r af nkelijk v de dikte v de deuree paa , ha an an
Buitencamera
1
C
De kabel g t r t in deur en wordt aa doo he gat de
aang en op ndeeslot he ot rdee aanl de Bin ij .nenzde
Stal B gelen eu
1
D
G ruik n schroe om t Buiten el aan stal eb ee f he de de en
beug beel e t vestigen
G ruiksaanwieb
j ingz
1
Ben dh deodig e n
01 Installatie
Verw r uw idi d rspion o b r e gat me e ijde hu ge eu f oo en t en
diameter van minim l mm maaa 13 en xim l 20 mm in uw aa
deu enr op e, geschikte plaats voo he en an ber t bek kij v zoek.
N.B. T t het r uct alti v r e nstallatie.es p od jd óó d i
04
O t tterijde el v bin n herm (A) pen he ba ks an het ne sc en
pl ts de Micro SD kaar Plaats vervolgens 3 AA aa t.
ba en ootter en ij org ervzr da e juist l ts n.t zgep aa t zij
N.B. Doe rst de Micr SD rt er v rdat e ee o kaa in oo u d
batter en tst.ij plaa
07
Druk v r ichtig t bin nsc rmoo zhe ne he
(A) er de stalen be el (D) v r ichtig me de k el en schuif t ug op ug , doe oo zt ab ,
naa ene enr b d oda hij vastk kt.zt li
02
Dr i de door u, basis v deurdikte ko aa op an de ge zen
schr v (B) in de Buitencamera (C), maar draai e niet oe en z
helemaal vast.
Duw rspion (C) vas en de deu t zorg erv r da ka l er oo t de be
ee doo gedurst r wd is en t de pijl op achter de v de , da de zij an
camera n r bov w st.aa en ij
05
Sluit k el aan door e in aansluiting e drukken, de ab dezde t
u v lt e “K k” als hij op printpl t vas it. Zorg oe en li de aa t z
erv r t kabel juis ge sition rd is, ls e ien in oo da de t po ee zoa t z
de ee afb lding.
In meer detail...
Tec ische specificatieshn
Bi nshuis- der el Afmeti : 6× × mmnne on de ngen 13 75 18
Buitenshuis- r el Afmetin : 30×30×7mmonde de gen
D r t diameter 13mm~20mmeu ga :
O rste de deurdikte: 35mm~105mmnde un
Ba erij 3 AA tterij (niet in repen)tt : ba en beg
Le en uuv sd r ba er : 3 m n ( baseerd op 10 maal g ruiken r tt ij aande ge eb pe
dag)
Voltage 4.5V~3.5V:
Opmerki enng
We rad aen an ne ba om A-merk alkali tterijen an een goe v de kwa tei e li t t
gebruiken.
Pl ts t product nie op ge jke o instabiele o rvlakaa he t on li f ppe ken om sc de ha
doo en oo enr vall te v rkom .
V rkom he pl tsen v oo t aa an het pr uc op te op rvla en, in od t he pe kk
om vin n met n ho luchtvochti eid o v l stof t vel en ge ge ee ge gh f ee , zou ne
ande ag ge ngre ressieve om vi en om da de levensd r van t product dat t uu he
k verkorten.an
D v r ichtig met t plaats voe oo zhe en an be de eu de ka l in d r, om scha e de t
v rkom .oo en
03
G ruik de stalen ueb be gel (D) en let erop t de p l n r ven da ij aa bo
w s w de kij t, du dan abe ga dan oel door het t. Duw de schr ven
doo en beu enr de gat , t zoda de stal en gel strak eg t de deur it.z
Dr i de schroev aan om de Buitencamera aan de stalen aa en
beug beel e t vestigen
06
D t kl je woe he ep ee de en de door over ba erijtt , kabel past r
een ne pe ng klei o ni in het klepje.
Vold t alle relev te Eur se richtl n .oe aan an ope ij en
Smartwares verkl rt t t stel, model VD27 vold taa da he toe [ ], oe
aa de be ngn la rijkste ess tiële eisen v de R& E-richt jn,en an TT li
1999/5/EG De vo edige conformiteitverklari is beschikbaar. ll ng
op oe verzk b :ij
Recyc ngli
Di symb l is k als t “ rgekruiste k ko-symb l”.t oo be end he doo li oo
Als di s ol op n produc o een ba erij is gemarkeerd, tek t dit t ymbo ee t f tt be en
da no out he niet me uw t t rmale huish delijk afval m wor n af v rd.ag de ge oe
Sommi ge he en chemisc stoff in elektrische/elektr isc producten of on he
ba nn ootter en kuij en v r de eid en he m i h elijk n amelgezondh t il eu sc ad zij . Z
elektrische/elektr i he apparat en ba erijen alt d on sc en tt ij apa oda dert in, zt
material die d rin i en w r ni w ruikt ku n wor .en aa ztt ee op eu geb nne den
Uw m werki is v vitaal lang vede ng an be oo age der he welslt n van ze
r li en en voor besc rming v het milieuege ng de he an
B
C.
uitencamera
B r een Ga in de roo t deu
K labe
B.
Bevestigingsschroeven
D
eur
D. Stalen B geleu
A
. Bi sc rmnnen he
Produktspecifikationer
| Varumärke: | Smartwares |
| Kategori: | Intercomsystem |
| Modell: | VD27 |
Behöver du hjälp?
Om du behöver hjälp med Smartwares VD27 ställ en fråga nedan och andra användare kommer att svara dig
Intercomsystem Smartwares Manualer
27 September 2024
19 September 2024
23 Augusti 2024
22 Augusti 2024
15 Augusti 2024
14 Augusti 2024
12 Augusti 2024
12 Augusti 2024
29 Juli 2024
Intercomsystem Manualer
- Intercomsystem Philips
- Intercomsystem Panasonic
- Intercomsystem Abus
- Intercomsystem Alecto
- Intercomsystem Hikvision
- Intercomsystem Silvercrest
- Intercomsystem Elro
- Intercomsystem EMOS
- Intercomsystem DataVideo
- Intercomsystem Axis
- Intercomsystem Byron
- Intercomsystem Midland
- Intercomsystem Viking
- Intercomsystem Somfy
- Intercomsystem Dahua Technology
- Intercomsystem DIO
- Intercomsystem Siedle
- Intercomsystem Valcom
- Intercomsystem Chacon
- Intercomsystem Bticino
- Intercomsystem Sygonix
- Intercomsystem Planet
- Intercomsystem Konig
- Intercomsystem Becken
- Intercomsystem Busch-Jaeger
- Intercomsystem Extel
- Intercomsystem Marmitek
- Intercomsystem M-e
- Intercomsystem DoorBird
- Intercomsystem Gira
- Intercomsystem Russound
- Intercomsystem Fanvil
- Intercomsystem Aiphone
- Intercomsystem Avidsen
- Intercomsystem ORNO
- Intercomsystem Sonifex
- Intercomsystem RTS
- Intercomsystem Vimar
- Intercomsystem ZKTeco
- Intercomsystem Akuvox
- Intercomsystem Hanwha
- Intercomsystem EtiamPro
- Intercomsystem Ritto
- Intercomsystem Arenti
- Intercomsystem Syscom
- Intercomsystem Pentatron
- Intercomsystem CyberData Systems
- Intercomsystem COMMAX
- Intercomsystem Bintec-elmeg
- Intercomsystem Eartec
- Intercomsystem Gewiss
- Intercomsystem TCS
- Intercomsystem Seco-Larm
- Intercomsystem NuTone
- Intercomsystem GEV
- Intercomsystem Tador
- Intercomsystem WHD
- Intercomsystem Mobotix
- Intercomsystem FlyingVoice
- Intercomsystem Vibell
Nyaste Intercomsystem Manualer
27 Oktober 2024
26 Oktober 2024
8 Oktober 2024
2 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024