Sonic Alert SBW100 Sonic Boom Bruksanvisning
Sonic Alert
Säkerhet
SBW100 Sonic Boom
Läs nedan 📖 manual på svenska för Sonic Alert SBW100 Sonic Boom (6 sidor) i kategorin Säkerhet. Denna guide var användbar för 10 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/6
English
Model SBW100
Sonic Boom
OPERATION INSTRUCTIONS
IMPORTANT - Please read these instructions carefully before use and retain for future reference.
- Use only the supplied or recommended Sonic Alert adaptor to connect the unit.
WARNING: To prevent fire or shock hazard do not expose this appliance to rain or moisture.
- The ventilation should not be impeded by covering the ventilation openings with items
such as, newspaper, table cloth, curtains, etc.;
- No naked flame sources, such as lighted candles should be placed on the apparatus.
- It shall not be exposed to dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
- Do not place the product in closed bookcases or racks without proper ventilation.
- Where the mains/ power plug is used as the disconnect device, the disconnect device
shall remain readily operable.
GENERAL DATA:
UL listed Power Adaptor: AC100-240V~, 50/60Hz
Adaptor Output: DC5V , 2.2 A
Features
1) PM Indicator
2) Alarm 1 Indicator
3) Alarm 2 Indicator
4) Alarm Mode Switch (AL1, AL2, AL1+AL2)
5) Alarm Off / LAMP on/off
6) Time Set
7) Alarm Set
8) Snooze / Dimmer
9) Fast
10) Slow / Sleep
11) Alarm Function Switch
Test Mode:
1) Press and hold the Snooze (8) and Time (6) buttons for 3 seconds to enter the Test Mode. The
display will show "7ES7" to indicate it is in TEST Mode.
2) If within 1 minute no button is pressed, then it will exit the Test Mode and return back to the
Time Mode.
3) While in Test Mode, sliding the Alarm Function Switch (11) will demonstrate the different
functions of the clock; Buzz, VIB or Buzz & Vib.
4) After finish with the Test Mode, press any button (except the Snooze & Time buttons, which has
no effect) it will exit the Test Mode immediately.
Setting the Correct Time -
1) Press and hold the TIME Button (6) and at the same time press the FAST Button (9)
or the SLOW button (10) to advance clock display until you have desired time.
2) The lighted dot (1) located in upper left corner of the clock display indicates the time is
PM. For AM time, this dot will not light up.
Setting the Alarm Time -
Setting Alarm 1
1) Slide the ALARM MODE SWITCH (4) to AL1 position, the alarm indicator AL1 (2) will
light up.
2) Press and hold the ALARM SET (7) button and at the same time press the FAST
Button (9) or the SLOW button (10) to advance clock display until the desired
alarm setting is reached.
3) Make sure alarm time is correctly set for AM or PM.
Setting Alarm 2
4) Once alarm AL1 has been set, slide ALARM MODE SWITCH (4) to AL2 position, the
alarm indicator AL2 (3) will light up.
5) Press and hold the ALARM SET (7) button and at the same time press the FAST
Button (9) or the SLOW button (10) to advance clock display until you reach desired
alarm setting.
12) Alarm Sound Selector
13) Vibrator Output
14) Tone Wheel
15) USB for Charging
16) AUX Input
17) DC Input
18) Volume Wheel
19) Record / Play
Selecting 12 or 24 hours format -
Press and hold the Fast Button (9) for 6 seconds to enter the hour selection mode,
release the Fast Button (9) when the display shows "12 H" or "24 H".
Press the FAST button (9) to toggle between 12 or 24 hours format. If no selection is
made within 4 seconds, then the last displayed hour format will be chosen and the display
will return to the normal Time mode.
Alarm -
Enable Alarms:
1) To enable Alarm 1, slide the ALARM MODE SWITCH (4) to AL1 position. the alarm
indicator AL1 (2) will light up.
2) To enable Alarm 2, slide the ALARM MODE SWITCH (4) to AL2 position, the alarm
indicator AL2 (3) will light up.
3) To enable both alarms, slide the ALARM MODE SWITCH (12) to AL1+AL2 position,
the alarm indicators AL1 (2) and AL2 (3) will light up.
Shutting Off the Alarm -
Alarm can be shut off temporary for the day or permanently shut off.
1) When alarm goes off, press the ALARM OFF (5) button to turn off for the day. The alarm will
repeat at the same time the next day, if alarm setting has not been changed.
2) To shut the alarm off permanently, slide the Alarm Function Switch (11) down to the
OFF position.
NOTE: The Alarm Off function of Alarm 1 and Alarm 2 is independent of each other.
To Select Wake up mode -
To select the wake up mode, slide the Alarm Function Switch (11) to your desired position: -
a) BUZZ for sound (Alarm Sound is user selectable)
b) VIB for bed shaker
c) VIB/ BUZZ for both sound and bed shaker
NOTE: once the wake up mode is chosen, this will apply to both alarms.
To Select Alarm Sound
To select the alarm sound, slide the Alarm Sound Selector (12) to your desired setting.
The user can select between, two built-in sounds, the standard buzzer sounds, as well as
their own recordings.
Recordings
To make your recording, press and hold the Record (19) button 1 sec, then make your own
recording. (10 sec)
To playback your recording, press the Play (19) button.
Alarm Patterns -
When the alarm is activated, alarm pattern of the buzzer / flashing display will be out of
sync with the vibrator. This means that when the buzzer / flashing display is ON, the vibrator will
be OFF and while the buzzer/ flashing display is OFF, the vibrator will be ON.
ALARM 1 - When Alarm 1 is active, the buzzer will beep 3 times, then the vibrator will be on.
This pattern is repeated until the alarm is stopped.
ALARM 2 - When Alarm 2 is active, the buzzer will beep 4 times, then the vibrator will be on.
Produktspecifikationer
| Varumärke: | Sonic Alert |
| Kategori: | Säkerhet |
| Modell: | SBW100 Sonic Boom |
Behöver du hjälp?
Om du behöver hjälp med Sonic Alert SBW100 Sonic Boom ställ en fråga nedan och andra användare kommer att svara dig
Säkerhet Sonic Alert Manualer
10 September 2024
6 September 2024
5 September 2024
26 Augusti 2024
Säkerhet Manualer
- Säkerhet Bosch
- Säkerhet Panasonic
- Säkerhet Honeywell
- Säkerhet Siemens
- Säkerhet Abus
- Säkerhet Alphatronics
- Säkerhet Aritech
- Säkerhet Airbolt
- Säkerhet Brennenstuhl
- Säkerhet Hikvision
- Säkerhet Yale
- Säkerhet Eminent
- Säkerhet Blaupunkt
- Säkerhet Ezviz
- Säkerhet Elro
- Säkerhet Doro
- Säkerhet Axa
- Säkerhet Optex
- Säkerhet Axis
- Säkerhet Theben
- Säkerhet Maginon
- Säkerhet Smartwares
- Säkerhet Profile
- Säkerhet Jacob Jensen
- Säkerhet Trebs
- Säkerhet Ednet
- Säkerhet Fenton
- Säkerhet Eufy
- Säkerhet Steinel
- Säkerhet Somfy
- Säkerhet Goliath
- Säkerhet Lamax
- Säkerhet Netgear
- Säkerhet Nest
- Säkerhet Grothe
- Säkerhet LevelOne
- Säkerhet Unitron
- Säkerhet Netatmo
- Säkerhet Goobay
- Säkerhet Switel
- Säkerhet Bticino
- Säkerhet First Alert
- Säkerhet Sygonix
- Säkerhet Nemef
- Säkerhet Dahua
- Säkerhet Powerfix
- Säkerhet Foscam
- Säkerhet BRK
- Säkerhet Bavaria
- Säkerhet Hagenuk
- Säkerhet Technaxx
- Säkerhet Jupiter Pro
- Säkerhet Xavax
- Säkerhet Elkron
- Säkerhet Niko
- Säkerhet Gira
- Säkerhet Jung
- Säkerhet Urmet
- Säkerhet Iget
- Säkerhet Wanscam
- Säkerhet Geemarc
- Säkerhet Satel
- Säkerhet Dymond
- Säkerhet Friedland
- Säkerhet Golmar
- Säkerhet Grandstream
- Säkerhet Batavia
- Säkerhet Provision ISR
- Säkerhet NetworX
- Säkerhet Bitron Video
- Säkerhet Eden
- Säkerhet Monacor
- Säkerhet Zmodo
- Säkerhet Electronics Line
- Säkerhet One2track
- Säkerhet HUMANTECHNIK
- Säkerhet Heidemann
- Säkerhet Directed Electronics
- Säkerhet Oplink
- Säkerhet Unitec
- Säkerhet Jablotron
- Säkerhet Muller
- Säkerhet Home8
- Säkerhet AVTech - Velleman
- Säkerhet Galaxy
- Säkerhet Smartalarm
- Säkerhet GE Security
- Säkerhet Entrya
- Säkerhet Tegui
- Säkerhet Woonveilig
- Säkerhet Indexa
- Säkerhet SecuFirst
- Säkerhet Bellman
- Säkerhet Protector
- Säkerhet Ksenia
- Säkerhet Mr Safe
- Säkerhet Epine
- Säkerhet Dedicated Micros
- Säkerhet Visonic
- Säkerhet PROmax
- Säkerhet Y-cam
- Säkerhet Selvag
- Säkerhet Voxx
- Säkerhet Fracarro
- Säkerhet Guardall
- Säkerhet Xena
- Säkerhet Smanos
- Säkerhet One Concept
- Säkerhet QuattSecure
- Säkerhet NetBotz
- Säkerhet Securitas
Nyaste Säkerhet Manualer
24 Oktober 2024
22 Oktober 2024
21 Oktober 2024
20 Oktober 2024
20 Oktober 2024
Axis Camera Station S9001 Mk II Desktop Terminal Bruksanvisning
19 Oktober 2024
18 Oktober 2024
18 Oktober 2024
18 Oktober 2024
5 Oktober 2024