SPL Machine Head 9737 Bruksanvisning

SPL Inte kategoriserad Machine Head 9737

Läs nedan 📖 manual på svenska för SPL Machine Head 9737 (18 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/18
Manual
Digital Tape Saturation Processor
Machine Head
Model 9737
SOUND PERFORMANCE LAB
by Hermann Gier
Version 1.3 1/1999
The information in this document has been
carefully verified and is assumed to be correct.
However Sound Performance Laboratory (SPL)
reserves the right to modify the product
described in this manual at any time. Changes
without notice. This document is the property of
SPL and may not be copied or reproduced in
any manner, in part or full without the autho-
rization of SPL.
Limitations of Liability:
In no event will SPL be liable for any damages,
including loss of data, lost profits, cost of cover
or other special, incidental, consequential or
indirect damages arising from the use of the
unit, however caused and on any theory of liabi-
lity. This limitation will apply even if SPL or an
authorized dealer has been advised of the
possibility of such damage.
SPL electronics GmbH
P.O. Box 12 27
D- 41368 Niederkruechten, Germany
Phone: +49 - 21 63 / 9 83 40
Fax: +49 - 21 63 / 98 34 20
eMail: info@spl-electronics.com
www.spl-electronics.com
©1999 SPL electronics GmbH. All Rights Reserved.
M HACHINE EAD
MODEL 9737
Manual
3
Machine Head
© SPL electronics GmbH, Stand 10/97
Contents
Dear customer,
Thank you for the confidence you have shown towards SPL
electronics GmbH by purchasing the SPL MACHINE HEAD. You
have decided to use a tool of high performance which sets you
in the position to have faster success and a better sound quality
in your music productions, pre-masterings and masterings.
As a typical SPL unit the MACHINE HEAD combines exemplary
specifications and high manufacturing standard with excellent
sound quality to provide you a precious component for studio
and mastering purposes. Please read this manual carefully to
ensure you have all the information you need to use the
MACHINE HEAD.
We wish you every success with the MACHINE H .EAD
Your SOUND PERFORMANCE LAB-Team
I would like to start with my thanks to all our staff, who
created what is to be described here. Special thanks go to Kai
Lukas from Lukas & Hartmann Soundart, Jörg Houpert and
Klaus-Peter Webersinke from Spectral Design as well as
Harald Obenland from Octum electronics. The importance of
their exceptional qualification and talents cannot be overesti-
mated.
Our products are often tested and compared in many publica-
tions and by our customers themselfs and constantly valued
with best results. I would like to pass on this broad appreciation
to those, who deserve it my excellent colleagues.
Hermann Gier
Foreword
Thanks
Foreword 3
Thanks 3
Introduction 4
Operation Safety 5
Connections 6
Installing Updates 6
Quick Start 7
Analogue Tape Recording Signal Flow 7
Control Elements 8
ACTIVE 8
INPUT GAIN 8
DRIVE 8
HF-ADJUST 9
OUTPUT GAIN 10
HIGH TAPE PEEDS 10
LC-DISPLAY 10
LED CHAINS 10
PRESETS 11
INFO (HARDWARE DIALOGUE) 11
Specifications 15
Warranty 16

Produktspecifikationer

Varumärke: SPL
Kategori: Inte kategoriserad
Modell: Machine Head 9737

Behöver du hjälp?

Om du behöver hjälp med SPL Machine Head 9737 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad SPL Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer