Spypoint Link-S-Dark Bruksanvisning

Spypoint Kamera Link-S-Dark

Läs nedan 📖 manual på svenska för Spypoint Link-S-Dark (160 sidor) i kategorin Kamera. Denna guide var användbar för 13 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/160
LINK-S-DARK
QUICK START GUIDE
v.1.1
2
E N G L I S H
IN THE BOX
1x Camera
1x Micro SIM card
(preactivated and
inserted in the camera)
1x 12V-USB cable
1x Mounting bracket
1x Installation strap
1x Quick Start Guide
NOTE
The SD card and the AA batteries are sold separately.
User Manual, software updates & FAQs available at:
www.spypoint.com/support.
COMPONENTS
qAntenna
w Solar panel
eLEDs
rPhoto lens
tLight sensor
yViewing screen
uDetection lens
iTest light
oNavigation buttons
aON/OFF switch
sSD card slot
dSlot for installation strap
and stand
fLocking latch
gCable lock hole
h12 V jack
jMicrophone
kScrew-thread for
standard ¼”-20
lBattery compartment
opening button and SIM
card slot (inside)
3
E N G L I S H
7
E N G L I S H
2. By having a look at your SPYPOINT application in the "Status"
section.
For accurate playback, it is important that you select the
correct battery type in the application settings.
INSTALLING AN SD CARD
The SD card is sold separately. You must therefore rst get
a class 10 SD card between 2 and 32 GB of memory.
Before inserting the SD card in your camera, it must be formatted
to ensure proper operation. Visit the www.spypoint.com/
support if you need help formatting your SD card.
INSERTING AN SD CARD
Make sure the camera is turned OFF.
Locate the SD card slot. It is located on the lower right side
(see diagram).
Insert an SD card (up to 32 GB) into the SD card slot with the
metal contacts facing the back.
The card is correctly inserted when you hear a click.
10
E N G L I S H
CHOOSING A PHOTO TRANSMISSION PLAN FOR YOUR CAMERA
Go to www.spypoint.com/en/spypoint-experience/plans
to read the latest oers and choose the plan that suits you.
STARTING UP THE DEVICE
You can congure your camera settings in 3 ways:
1. Directly from the camera screen. After turning it on,
choose "conguration" from the main menu.
2. Through the SPYPOINT application, in the "Settings"
section.
3. By the SPYPOINT web app. You will rst need to create an
account and then log in. Use the "Settings" section.
Both the SPYPOINT app and website allow you to remotely
congure all of your camera's parameters and to obtain the
status of its main elements, including cellular signal strength,
battery power level and space used on the SD card.
Your new settings will be applied the next time your camera
communicates with the serve via the cellular network.
Note that during the 15 minutes after starting up your camera,
it will communicate with the server each time it takes a
photo and it will also apply the settings you previously chose.
Afterwards, the camera will communicate according to the
default settings (transfer frequency/rst transfer time) or
those you chose. You will nd below the basic settings you can
congure.

Produktspecifikationer

Varumärke: Spypoint
Kategori: Kamera
Modell: Link-S-Dark

Behöver du hjälp?

Om du behöver hjälp med Spypoint Link-S-Dark ställ en fråga nedan och andra användare kommer att svara dig




Kamera Spypoint Manualer

Kamera Manualer

Nyaste Kamera Manualer