StarTech.com HB30A10AME Bruksanvisning

StarTech.com USB-hubb HB30A10AME

Läs nedan 📖 manual på svenska för StarTech.com HB30A10AME (2 sidor) i kategorin USB-hubb. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: September 10, 2024 6:17 PM
Product ID: HB30A10AME, ST1030USBM
Component Function
12-Wire Terminal Block Used to connect an external DC Power Source
(7~24V DC Input) to the .Hub
2Screw Locks (x 10)
Used to securely lock a to the USB Device
USB-A Port Hub on the .
Center to center 19 Screw Lock Dimensions:
mm, thread size 4 - 40.
3Power LED : Indicates that the Hub is receiving Green
power.
4USB-B Host Port
Used to connect a to the .Host Computer Hub
Center to center 24 Screw Lock Dimensions:
mm, thread size 4 - 40.
5USB-A Ports (x 10)
Used to connect ( x 10) to the USB Devices
Hub.
Used to charge connected .USB-A Devices
USB-A Ports support surge and 15KV ESD
(Electrostatic Discharge) Protection.
10-Port Industrial USB 3.0 (5 Gbps) Hub | USB 3.2 Gen 1 to 10x USB-A | ESD & Surge Protection
3
Requirements
For the latest requirements, please visit or
www.startech.com/HB30A10AME www.
startech.com/ST1030USBM
Phillips Head Screwdriver
Writing Utensil
Level
Mounting Screws (x 2)
Installation
Notes: It is recommended to use an external (+7 - 24V DC)DC Power Source
connected to the to ensure sucient power/current is 2-Wire Terminal Block
delivered to each on the . USB-A Port Hub
Powering the Hub Using the Universal Power Adapter
1. Connect the to the and to a Universal Power Adapter Terminal Block AC
Electrical Outlet.
Note: HB30A10AME ST1030USBMUniversal power adapter included with ; does not
include power adapter ( ).sold separately
2. Connect a (the end will depend on USB Port you are USB-B to USB Cable
connecting to) to the and to a USB port on the .USB-B Host Port Host Computer
3. The should detect the and Host Computer’s Operating System Hub
automatically install it.
4. Connect your to the (x 10) on the . USB Devices USB-A Ports Hub
Powering the Hub Using the 2-Wire Terminal Block
1. Remove the from the .Terminal Block Connector Housing Hub’s Casing
2. Using a small screwdriver (Phillips or Flat Head), loosen the screws on the Terminal
Block Connectors.
3. Connect the and from your (+7 - 24V DC) Power Ground Wires DC Power Source
to the proper , the terminals are marked on theTerminal Block Connectors Hub’s
Casing.
4 5
2
1
* Actual product may vary from photos

Produktspecifikationer

Varumärke: StarTech.com
Kategori: USB-hubb
Modell: HB30A10AME

Behöver du hjälp?

Om du behöver hjälp med StarTech.com HB30A10AME ställ en fråga nedan och andra användare kommer att svara dig




USB-hubb StarTech.com Manualer

USB-hubb Manualer

Nyaste USB-hubb Manualer